Loading battery directory

Fetching battery data with specs, ratings, and warranty details...

Home battery · Pylontech · PowerCube-M1-C series · CEC approval expired

Pylontech PowerCube-M1C-32/704V-L10

A 98.9824 kWh home battery. Very big home size, the 40+ kWh band.

WA Battery Scheme rebate: $0It isn't currently on the CEC approved list, which the scheme requires
Usable capacity: 98.9824kWh
Warranty: 10yrs

Datasheet (PDF)

PowerCube-M1C-32/704V-L10: the short answer

In the PowerCube-M1-C seriesOne of 2 sizes, from 44.992 to 49.4912 kWh: 98.9824kWhOne of 2 sizes, from 44.992 to 49.4912 kWh
WA Battery SchemeIt isn't currently on the CEC approved list, which the scheme requires: Not eligibleIt isn't currently on the CEC approved list, which the scheme requires

Other sizes in the PowerCube-M1-C series

What we can tell you

Read from the figures on this page. No review written yet.

98.9824 kWh sits in the very big home band (40+ kWh).

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Usable capacity: 98.9824kWh; How much energy it stores for you to use
Continuous power: Not on file: we don't have this figure from the manufacturer's documents yet; How much it can run at once
Round-trip efficiency: Not on file: we don't have this figure from the manufacturer's documents yet; How much of the energy you store comes back out
Warranty: 10yr; 80% of capacity guaranteed at the end of it
Battery chemistry: LFP; Lithium iron phosphate, the long-cycle-life type

Not on file: we don’t have these figures from the manufacturer’s documents yet, so we leave them blank rather than print typical values. Ask your installer to confirm them on the quote. Seen it in a document? Tell us

Warranty and support

The Powercube M1C warranty covers defects for 10 years; it excludes damages from misuse and improper installation. Claims are made via Pylontech's website within 48 hours of discovery.

Product: 10 years; not transferable; full replacement
At year 10: At least 80% of capacity
Throughput: Not on record
Installation: Must be installed by an SAA-accredited installer
Support: Not verifiedWe have not verified this brand's Australian support structure. Confirm warranty arrangements with the manufacturer or your installer.

Warranty document Datasheet Compare warranties

WA Battery Scheme eligibility

Not eligible

Whether this battery pairs with an inverter on Synergy's list, whether it can join a VPP, and whether it qualifies for the state rebate. Rebate and STC amounts are shown in the pricing panel.

CSIP-AUS compliant: Inverter must be CSIP-AUS compliant under the current WA framework.
VPP activation ready: Unavailable: it isn't currently on the CEC approved list, which the scheme requires.
WA Battery Scheme rebate: Unavailable: it isn't currently on the CEC approved list, which the scheme requires.
Synergy Battery Rewards: Unavailable: it isn't currently on the CEC approved list, which the scheme requires.
Interest-free loan: Unavailable: it isn't currently on the CEC approved list, which the scheme requires.

Under current WA rules, new rebate applications require VPP enrolment and CSIP-AUS compliance. How the scheme works · Estimate VPP earnings

Full datasheet

Every figure on file for the Pylontech PowerCube-M1-C, by section.

Cell & chemistry

Chemistry: LFP

Lifespan & degradation

Capacity retained at year 10: 80%
Warranted throughput: 0 MWh

Physical

IP rating: IP20

Installation requirements

Top clearance: 300 mm
Side clearance: 300 mm
Front clearance: 400 mm
AC breaker: 20 A
Cable gauge: 6 mm²
Earthing method: TN-S
DNSP pre-approval: Yes
Estimated install time: 8 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Documents

Fault & error codes — Pylontech PowerCube-M1-C

Extracted from the installation manual

13 documented

Showing 13 of 13. The official install manual is the authoritative source — always confirm before acting.

Battery Cell ErrcriticalCall your installer
Manual (PDF)
Battery cell voltage measured lower than 2.0V
Likely cause
Indicates possible cell damage
What to do
Restart the system; check the battery module for damage
Battery damage errorcriticalCall your installer
Manual (PDF)
Battery cell voltage measured at less than 2.0V
Likely cause
Possible battery cell failure
What to do
Restart the system; if error persists, swap out the LED module or measure voltage at the battery terminal.
BMU Internal bus errorcriticalCall your installer
Manual (PDF)
BMU internal error
Likely cause
Functionality fault within BMU
What to do
Replace the BMU of the affected module.
Current Leakage ErrcriticalCall your installer
Manual (PDF)
Current leakage greater than 25mA
Likely cause
Possible insulation failure
What to do
Disconnect the battery system immediately and contact a service engineer
Current Leakage ErrorcriticalCall your installer
Manual (PDF)
Current leakage exceeds 25mA
Likely cause
Possible insulation failure in circuit
What to do
Disconnect the battery system immediately and contact Pylontech service engineer.
Relay ErrcriticalCall your installer
Manual (PDF)
Switching relay issue during startup
Likely cause
Relay adhesion or damage
What to do
Ensure the correct startup procedure is followed and check relay function
Relay ErrorcriticalCall your installer
Manual (PDF)
Start-up procedure problem
Likely cause
Relay adhesion or physical damage
What to do
Switch off the inverter and battery system, then check DCBUS for voltage; ensure proper sequence during start-up.
Safety check failurecriticalCall your installer
Manual (PDF)
Chip self-test failed
Likely cause
Potential hardware malfunction
What to do
Restart the system; if issue persists, contact Pylontech service engineer.
DC OV ERRwarning
Manual (PDF)
Input over voltage error
Likely cause
D+ D- voltage extremely higher than battery system voltage
What to do
Check external inverter's voltage to ensure it matches battery system voltage
Input RV Errwarning
Manual (PDF)
D+ D- reversely connected
Likely cause
Check the external power cables of the polarity and connection
What to do
Check the external power cables of the polarity and ensure correct connection
Intern Comm. ERRwarningCall your installer
Manual (PDF)
Communication failure between module and BMS
Likely cause
Poor connectivity or faulty communication cable
What to do
Check the communication cables between BMS and battery modules
Self-test Initial ErrwarningCall your installer
Manual (PDF)
Self-test module initial operation failure
Likely cause
Self-test failed during initialization
What to do
Restart the system; if the problem persists, contact Pylontech service
Emergency stopinfo
Manual (PDF)
Command by external device via dry contactor
Likely cause
Command issued by external device, not an error actively reported by the battery system
What to do
Ensure external device status is checked.

About Pylontech

Years in the Australian market: 9+ (CEC-approved products since 2017)
Local support: Not verified
CEC-listed products: 79 models

View full profile →

What it costs in Perth

We price batteries by size rather than by model. The average installed price before rebates:

10 kWh: $7,000–$9,000
20 kWh: $10,000–$15,000

Solar Battery Perth’s estimate, Oct 2026. Other sizes are not priced here, and a quote prices this model.

Rebates on this battery

WA Battery Scheme: $0
Federal STCs: $0

Both rebates are $0 here: this battery isn’t currently on the CEC approved list, which the WA scheme and the federal STC program both require.

Explore your options

Which size band is your home?

Usable capacity, for one battery system

Smaller home: 10 to 15 kWh
Medium home: 20 to 30 kWh
Big home: 30 to 40 kWh
Very big home: 40+ kWh

This battery is one unit in the very big home band. The WA rebate caps at 10 kWh, but that is a rebate limit, not a sizing guide.

How it compares

The Pylontech PowerCube-M1C-32/704V-L10 against the closest-sized batteries from other brands.

Specification	Pylontech PowerCube-M1C-32/704V-L10Pylontech	Sungrow ST100CFSungrow	Solis Storage EverCore-99.9kWhSolis Storage

Usable capacity?	98.9824 kWh	99.8 kWh	99.9 kWhhighest
Continuous power?	Not verified	Not verified	Not verified
Peak power?	Not verified	Not verified	Not verified

Round-trip efficiency?	Not verified	Not verified	Not verified
Warranty	10 years	Not verified	Not verified
Chemistry	LFP	LFP	LFP

Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.

More from Pylontech

Other CEC-approved products from Pylontech available in Australia.

Pylontech Inverters

FH3X-10K-HY-3P-10

10 kW · 3φ

FH3X-10K-HY-3P-15

10 kW · 3φ

FH3X-10K-HY-3P-20

10 kW · 3φ

FH3X-10K-HY-3P-25

10 kW · 3φ

FH3X-10K-HY-3P-30

10 kW · 3φ

FH3X-10K-HY-3P-35

10 kW · 3φ

View all Pylontech inverters

View full Pylontech manufacturer profile

Want to take the next step?

Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.

This model is one entry in the desk's index of solar batteries for Perth: every CEC-approved battery on one comparable dataset.

Product Information Disclaimer:

Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.

Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.

Explore your options Compare batteries

Spotted something outdated?

Home battery · Pylontech · PowerCube-M1-C series · CEC approval expired

Pylontech PowerCube-M1C-32/704V-L10

A 98.9824 kWh home battery. Very big home size, the 40+ kWh band.

WA Battery Scheme rebate: $0It isn't currently on the CEC approved list, which the scheme requires
Usable capacity: 98.9824kWh
Warranty: 10yrs

Datasheet (PDF)

PowerCube-M1C-32/704V-L10: the short answer

In the PowerCube-M1-C seriesOne of 2 sizes, from 44.992 to 49.4912 kWh: 98.9824kWhOne of 2 sizes, from 44.992 to 49.4912 kWh
WA Battery SchemeIt isn't currently on the CEC approved list, which the scheme requires: Not eligibleIt isn't currently on the CEC approved list, which the scheme requires

Other sizes in the PowerCube-M1-C series

What we can tell you

Read from the figures on this page. No review written yet.

98.9824 kWh sits in the very big home band (40+ kWh).

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Usable capacity: 98.9824kWh; How much energy it stores for you to use
Continuous power: Not on file: we don't have this figure from the manufacturer's documents yet; How much it can run at once
Round-trip efficiency: Not on file: we don't have this figure from the manufacturer's documents yet; How much of the energy you store comes back out
Warranty: 10yr; 80% of capacity guaranteed at the end of it
Battery chemistry: LFP; Lithium iron phosphate, the long-cycle-life type

Warranty and support

The Powercube M1C warranty covers defects for 10 years; it excludes damages from misuse and improper installation. Claims are made via Pylontech's website within 48 hours of discovery.

Product: 10 years; not transferable; full replacement
At year 10: At least 80% of capacity
Throughput: Not on record
Installation: Must be installed by an SAA-accredited installer
Support: Not verifiedWe have not verified this brand's Australian support structure. Confirm warranty arrangements with the manufacturer or your installer.

Warranty document Datasheet Compare warranties

WA Battery Scheme eligibility

Not eligible

Whether this battery pairs with an inverter on Synergy's list, whether it can join a VPP, and whether it qualifies for the state rebate. Rebate and STC amounts are shown in the pricing panel.

CSIP-AUS compliant: Inverter must be CSIP-AUS compliant under the current WA framework.
VPP activation ready: Unavailable: it isn't currently on the CEC approved list, which the scheme requires.
WA Battery Scheme rebate: Unavailable: it isn't currently on the CEC approved list, which the scheme requires.
Synergy Battery Rewards: Unavailable: it isn't currently on the CEC approved list, which the scheme requires.
Interest-free loan: Unavailable: it isn't currently on the CEC approved list, which the scheme requires.

Under current WA rules, new rebate applications require VPP enrolment and CSIP-AUS compliance. How the scheme works · Estimate VPP earnings

Full datasheet

Every figure on file for the Pylontech PowerCube-M1-C, by section.

Cell & chemistry

Chemistry: LFP

Lifespan & degradation

Capacity retained at year 10: 80%
Warranted throughput: 0 MWh

Physical

IP rating: IP20

Installation requirements

Top clearance: 300 mm
Side clearance: 300 mm
Front clearance: 400 mm
AC breaker: 20 A
Cable gauge: 6 mm²
Earthing method: TN-S
DNSP pre-approval: Yes
Estimated install time: 8 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Documents

Fault & error codes — Pylontech PowerCube-M1-C

Extracted from the installation manual

13 documented

Showing 13 of 13. The official install manual is the authoritative source — always confirm before acting.

Battery Cell ErrcriticalCall your installer
Manual (PDF)
Battery cell voltage measured lower than 2.0V
Likely cause
Indicates possible cell damage
What to do
Restart the system; check the battery module for damage
Battery damage errorcriticalCall your installer
Manual (PDF)
Battery cell voltage measured at less than 2.0V
Likely cause
Possible battery cell failure
What to do
Restart the system; if error persists, swap out the LED module or measure voltage at the battery terminal.
BMU Internal bus errorcriticalCall your installer
Manual (PDF)
BMU internal error
Likely cause
Functionality fault within BMU
What to do
Replace the BMU of the affected module.
Current Leakage ErrcriticalCall your installer
Manual (PDF)
Current leakage greater than 25mA
Likely cause
Possible insulation failure
What to do
Disconnect the battery system immediately and contact a service engineer
Current Leakage ErrorcriticalCall your installer
Manual (PDF)
Current leakage exceeds 25mA
Likely cause
Possible insulation failure in circuit
What to do
Disconnect the battery system immediately and contact Pylontech service engineer.
Relay ErrcriticalCall your installer
Manual (PDF)
Switching relay issue during startup
Likely cause
Relay adhesion or damage
What to do
Ensure the correct startup procedure is followed and check relay function
Relay ErrorcriticalCall your installer
Manual (PDF)
Start-up procedure problem
Likely cause
Relay adhesion or physical damage
What to do
Switch off the inverter and battery system, then check DCBUS for voltage; ensure proper sequence during start-up.
Safety check failurecriticalCall your installer
Manual (PDF)
Chip self-test failed
Likely cause
Potential hardware malfunction
What to do
Restart the system; if issue persists, contact Pylontech service engineer.
DC OV ERRwarning
Manual (PDF)
Input over voltage error
Likely cause
D+ D- voltage extremely higher than battery system voltage
What to do
Check external inverter's voltage to ensure it matches battery system voltage
Input RV Errwarning
Manual (PDF)
D+ D- reversely connected
Likely cause
Check the external power cables of the polarity and connection
What to do
Check the external power cables of the polarity and ensure correct connection
Intern Comm. ERRwarningCall your installer
Manual (PDF)
Communication failure between module and BMS
Likely cause
Poor connectivity or faulty communication cable
What to do
Check the communication cables between BMS and battery modules
Self-test Initial ErrwarningCall your installer
Manual (PDF)
Self-test module initial operation failure
Likely cause
Self-test failed during initialization
What to do
Restart the system; if the problem persists, contact Pylontech service
Emergency stopinfo
Manual (PDF)
Command by external device via dry contactor
Likely cause
Command issued by external device, not an error actively reported by the battery system
What to do
Ensure external device status is checked.

About Pylontech

Years in the Australian market: 9+ (CEC-approved products since 2017)
Local support: Not verified
CEC-listed products: 79 models

View full profile →

What it costs in Perth

We price batteries by size rather than by model. The average installed price before rebates:

10 kWh: $7,000–$9,000
20 kWh: $10,000–$15,000

Solar Battery Perth’s estimate, Oct 2026. Other sizes are not priced here, and a quote prices this model.

Rebates on this battery

WA Battery Scheme: $0
Federal STCs: $0

Both rebates are $0 here: this battery isn’t currently on the CEC approved list, which the WA scheme and the federal STC program both require.

Explore your options

Which size band is your home?

Usable capacity, for one battery system

Smaller home: 10 to 15 kWh
Medium home: 20 to 30 kWh
Big home: 30 to 40 kWh
Very big home: 40+ kWh

This battery is one unit in the very big home band. The WA rebate caps at 10 kWh, but that is a rebate limit, not a sizing guide.

How it compares

The Pylontech PowerCube-M1C-32/704V-L10 against the closest-sized batteries from other brands.

Specification	Pylontech PowerCube-M1C-32/704V-L10Pylontech	Sungrow ST100CFSungrow	Solis Storage EverCore-99.9kWhSolis Storage

Usable capacity?	98.9824 kWh	99.8 kWh	99.9 kWhhighest
Continuous power?	Not verified	Not verified	Not verified
Peak power?	Not verified	Not verified	Not verified

Round-trip efficiency?	Not verified	Not verified	Not verified
Warranty	10 years	Not verified	Not verified
Chemistry	LFP	LFP	LFP

Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.