Skip to main content
Solar Battery PerthSolar Battery Perth
  • Library
  • Compare
  • Calculate savings
  • Quote
  • Tools
Battery matcher
Battery matcher

Rebate and policy updates by email

What's changing with WA rebates and battery rules, for Perth homeowners.

Solar Battery Perth

WA-specific solar and battery tools with transparent installer matching for Synergy and Western Power customers.

  • 08 9429 8803
  • info@solarbatteryperth.com.au
Explore your optionsCompare products

Tools

  • Solar system quiz
  • Side-by-side comparison
  • Savings calculator
  • Tariff comparison
  • VPP earnings
  • Quote evaluator
  • Warranty comparison
  • Library
  • Product search
  • All tools

Information

  • How it works
  • Resources
  • WA rebates & incentives
  • Battery price index
  • Synergy tariffs
  • Financing
  • Getting started
  • Buyer's guide
  • Solar and battery integration
  • Battery scenarios

Get started

  • Find installers
  • Perth suburbs
  • Brands
  • Contact us
  • Common questions
Privacy policyTerms of useDisclaimerReview policyAffiliate disclosureAccessibility

© 2026 Solar Battery Perth, operated by WattMate Pty Ltd. Independent solar and battery resource for WA homeowners.

Installers pay us a flat $30 including GST per accepted lead, the same for every installer and every system. How it works

45 Ventnor Avenue, West Perth WA 6005

  • Home
  • Library
  • Compare
  • Savings
  • Quote
  1. Home
  2. Batteries
  3. Pylontech
  4. PowerCube-M1-C series
  5. PowerCube-M1C-32/672V-L10

Home battery · Pylontech · PowerCube-M1-C series · CEC approval expired

Pylontech PowerCube-M1C-32/672V-L10

A 94.48 kWh home battery. Very big home size, the 40+ kWh band.

WA Battery Scheme rebate
$0It isn't currently on the CEC approved list, which the scheme requires
Usable capacity
94.48kWh
Warranty
10yrs
Datasheet (PDF)

Get this battery quoted in Perth

Enter your postcode and get a free, no-obligation quote from a member installer who covers your area.

PowerCube-M1C-32/672V-L10: the short answer

In the PowerCube-M1-C seriesOne of 2 sizes, from 44.992 to 49.4912 kWh
94.48kWhOne of 2 sizes, from 44.992 to 49.4912 kWh
WA Battery SchemeIt isn't currently on the CEC approved list, which the scheme requires
Not eligibleIt isn't currently on the CEC approved list, which the scheme requires

Other sizes in the PowerCube-M1-C series

  • 44.99 kWh
  • 49.49 kWh
  • 94.48 kWh (this one)
  • See the whole series →

What we can tell you

Read from the figures on this page. No review written yet.

  • 94.48 kWh sits in the very big home band (40+ kWh).

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Usable capacity
94.48kWh
How much energy it stores for you to use
Continuous power
Not on file: we don't have this figure from the manufacturer's documents yet
How much it can run at once
Round-trip efficiency
Not on file: we don't have this figure from the manufacturer's documents yet
How much of the energy you store comes back out
Warranty
10yr
How long the manufacturer stands behind it
Battery chemistry
LFP
Lithium iron phosphate, the long-cycle-life type
Size and weight
70kg
Installed weight

Not on file: we don’t have these figures from the manufacturer’s documents yet, so we leave them blank rather than print typical values. Ask your installer to confirm them on the quote. Seen it in a document? Tell us

Warranty and support

The Powercube M1C warranty covers defects for 10 years; it excludes damages from misuse and improper installation. Claims are made via Pylontech's website within 48 hours of discovery.

Product
10 years; not transferable; full replacement
Throughput
Not on record
Installation
Must be installed by an SAA-accredited installer
Support
Australian supportAustralian support contact on record; 9 years on the CEC list. Confirm the claim process with your installer.

Warranty documentDatasheetCompare warranties

WA Battery Scheme eligibility

Not eligible

Whether this battery pairs with an inverter listed for battery storage on Synergy's list, whether it can join a VPP, and whether it qualifies for the state rebate. Rebate and STC amounts are shown in the pricing panel.

CSIP-AUS compliant
Inverter must be CSIP-AUS compliant under the current WA framework.
VPP activation ready
Unavailable: it isn't currently on the CEC approved list, which the scheme requires.
WA Battery Scheme rebate
Unavailable: it isn't currently on the CEC approved list, which the scheme requires.
Synergy Battery Rewards
Unavailable: it isn't currently on the CEC approved list, which the scheme requires.
Interest-free loan
Unavailable: it isn't currently on the CEC approved list, which the scheme requires.

Under current WA rules, new rebate applications require VPP enrolment and CSIP-AUS compliance. How the scheme works · Estimate VPP earnings

Full datasheet

Every figure on file for the Pylontech PowerCube-M1-C, by section.

Cell & chemistry

Chemistry
LFP

Capacity & power

Nominal capacity
99.46 kWh
Usable capacity
94.48 kWh

Lifespan & degradation

Warranted throughput
0 MWh

Physical

Weight
70 kg
IP rating
IP20

Installation requirements

Top clearance
300 mm
Side clearance
300 mm
Front clearance
400 mm
AC breaker
20 A
Cable gauge
6 mm²
Earthing method
TN-S
DNSP pre-approval
Yes
Estimated install time
8 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Documents

  • Datasheet and installation guide and user manual and compliance certificatePDF, opens in a new tab
  • Warranty termsPDF, opens in a new tab

Fault & error codes — Pylontech PowerCube-M1-C

Extracted from the installation manual

13 documented

Showing 13 of 13. The official install manual is the authoritative source — always confirm before acting.

  • Battery Cell ErrcriticalCall your installer
    Manual (PDF)

    Battery cell voltage measured lower than 2.0V

    Likely cause
    Indicates possible cell damage
    What to do
    Restart the system; check the battery module for damage
  • Battery damage errorcriticalCall your installer
    Manual (PDF)

    Battery cell voltage measured at less than 2.0V

    Likely cause
    Possible battery cell failure
    What to do
    Restart the system; if error persists, swap out the LED module or measure voltage at the battery terminal.
  • BMU Internal bus errorcriticalCall your installer
    Manual (PDF)

    BMU internal error

    Likely cause
    Functionality fault within BMU
    What to do
    Replace the BMU of the affected module.
  • Current Leakage ErrcriticalCall your installer
    Manual (PDF)

    Current leakage greater than 25mA

    Likely cause
    Possible insulation failure
    What to do
    Disconnect the battery system immediately and contact a service engineer
  • Current Leakage ErrorcriticalCall your installer
    Manual (PDF)

    Current leakage exceeds 25mA

    Likely cause
    Possible insulation failure in circuit
    What to do
    Disconnect the battery system immediately and contact Pylontech service engineer.
  • Relay ErrcriticalCall your installer
    Manual (PDF)

    Switching relay issue during startup

    Likely cause
    Relay adhesion or damage
    What to do
    Ensure the correct startup procedure is followed and check relay function
  • Relay ErrorcriticalCall your installer
    Manual (PDF)

    Start-up procedure problem

    Likely cause
    Relay adhesion or physical damage
    What to do
    Switch off the inverter and battery system, then check DCBUS for voltage; ensure proper sequence during start-up.
  • Safety check failurecriticalCall your installer
    Manual (PDF)

    Chip self-test failed

    Likely cause
    Potential hardware malfunction
    What to do
    Restart the system; if issue persists, contact Pylontech service engineer.
  • DC OV ERRwarning
    Manual (PDF)

    Input over voltage error

    Likely cause
    D+ D- voltage extremely higher than battery system voltage
    What to do
    Check external inverter's voltage to ensure it matches battery system voltage
  • Input RV Errwarning
    Manual (PDF)

    D+ D- reversely connected

    Likely cause
    Check the external power cables of the polarity and connection
    What to do
    Check the external power cables of the polarity and ensure correct connection
  • Intern Comm. ERRwarningCall your installer
    Manual (PDF)

    Communication failure between module and BMS

    Likely cause
    Poor connectivity or faulty communication cable
    What to do
    Check the communication cables between BMS and battery modules
  • Self-test Initial ErrwarningCall your installer
    Manual (PDF)

    Self-test module initial operation failure

    Likely cause
    Self-test failed during initialization
    What to do
    Restart the system; if the problem persists, contact Pylontech service
  • Emergency stopinfo
    Manual (PDF)

    Command by external device via dry contactor

    Likely cause
    Command issued by external device, not an error actively reported by the battery system
    What to do
    Ensure external device status is checked.

About Pylontech

Years on the CEC list
9+ (CEC-approved products since 2017)
Local support
Available
CEC-listed products
79 models
View full profile →

What it costs in Perth

We price batteries by size rather than by model. The average installed price before rebates:

10 kWh
$7,000–$9,000
20 kWh
$10,000–$15,000

Solar Battery Perth’s estimate, Oct 2026. Other sizes are not priced here, and a quote prices this model.

Rebates on this battery

WA Battery Scheme
$0
Federal STCs
$0

Both rebates are $0 here: this battery isn’t currently on the CEC approved list, which the WA scheme and the federal STC program both require.

Explore your options
  • Compare with the nearest batteries→
  • Already have a quote? Check it→
  • Get quotes on this battery→
  • Not sure what size you need?→

Which size band is your home?

Usable capacity, for one battery system

Smaller home
10 to 15 kWh
Medium home
20 to 30 kWh
Big home
30 to 40 kWh
Very big home
40+ kWh

This battery is one unit in the very big home band. The WA rebate caps at 10 kWh, but that is a rebate limit, not a sizing guide.

How it compares

The Pylontech PowerCube-M1C-32/672V-L10 against the closest-sized batteries from other brands.

Specification
Pylontech PowerCube-M1C-32/672V-L10Pylontech
Sigenergy SigenStack M2-0.5C-BST-8/96.46 kWhSigenergy
Sigenergy SigenStack M2-1C-BST-8/96.46 kWhSigenergy
Usable capacity?94.48 kWh✓highest93.6 kWh93.6 kWh
Continuous power?Not verifiedNot verifiedNot verified
Peak power?Not verifiedNot verifiedNot verified
Round-trip efficiency?Not verifiedNot verifiedNot verified
Warranty10 yearsNot verifiedNot verified
ChemistryLFPLFPLFP

Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.

More from Pylontech

Other CEC-approved products from Pylontech available in Australia.

Pylontech Inverters

FH3X-10K-HY-3P-10

10 kW · 3φ

FH3X-10K-HY-3P-15

10 kW · 3φ

FH3X-10K-HY-3P-20

10 kW · 3φ

FH3X-10K-HY-3P-25

10 kW · 3φ

FH3X-10K-HY-3P-30

10 kW · 3φ

FH3X-10K-HY-3P-35

10 kW · 3φ

View all Pylontech inverters
View full Pylontech manufacturer profile

Want to take the next step?

Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.

We collect these details to prepare your quote match and to share with the installer(s) we match you with. Not providing them means we can't match you. Full collection notice.

Or explore your battery options first →

By requesting quotes you agree to be contacted by installers in our network about your enquiry. Part of WattMate Pty Ltd. No spam, opt out any time.

This model is one entry in the desk's index of solar batteries for Perth: every CEC-approved battery on one comparable dataset.

Product Information Disclaimer:

Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.

Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.

Explore your optionsCompare batteries
Spotted something outdated?