Loading Solar Battery Perth...

Product Information Disclaimer:

Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.

Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.

Back to all batteries

CEC approved: Nov 2023Report outdated info

GROWATT APX 30.0P-S1

Name: GROWATT APX 30.0P-S1
Brand: GROWATT

APX S1 series

CEC Approved

View datasheet (PDF)

Part of APX S1 — see all configurations

Usable capacity: 27 kWh
Continuous power: 7.5 kW
Peak power: 12 kW
Round-trip efficiency: 90%
Warranty: 10 yr
Chemistry: Cobalt Free Lithium Iron Phosphate(LFP)

Full specifications

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Cell & chemistry

Chemistry: Cobalt Free Lithium Iron Phosphate(LFP)
Cell type: Lithium Iron Phosphate

Capacity & power

Nominal capacity: 30 kWh
Usable capacity: 27 kWh
Continuous power: 7.5 kW
Peak power: 12 kW
Depth of discharge: 90%
Round-trip efficiency: 90%
Nominal voltage: 650 V

Lifespan & degradation

Cycle life: 10000 cycles
Capacity retained at year 10: 60%
Warranted throughput: 0 MWh

Modularity & stacking

Modular / stackable: Yes
Maximum stack: 30 kWh

Backup & grid services

Backup capable: No
VPP ready: No

Physical

Dimensions (H×W×D): 1250 × 690 × 185 mm
Weight: 321 kg
IP rating: IP66

Operating environment

Operating temperature: -10°C to 50°C

Resources

Datasheet Warranty terms Installation guide

Warranty and support

Warranty terms and Australian support structure.

The 10-year warranty covers defects in battery performance, retaining at least 60% capacity. Warranty voids for misuse or failure to follow guidelines. Claims can be made via Growatt service.

Duration

years

Throughput

∞

MWh

Max Temp

50°

celsius

Max Backup

Level 0

No Backup

Australian support structure

Australian Office12 years in AU market

Growatt Australia

Direct manufacturer warranty. Australian consumer law applies.

Perth climate suitability

Suited to Perth climate

Rated to 50°C, which covers Perth's hottest days.

Key warranty terms

•Depth of Discharge: 90% usable capacity
•Round-trip Efficiency: 90% rated
•Annual Degradation: ~2.5% per year expected
•Installation: Must be installed by SAA-accredited installer
•Operating Conditions: -10°C to 50°C

✗ Non-transferableFull replacement≥60% capacity at year 10

Warranty Document Datasheet Compare Warranties

WA Battery Scheme eligibility

Check eligibility

Synergy SSL inverter pairing, VPP participation and state-rebate qualification for this battery. Rebate and STC amounts are shown in the pricing panel.

CSIP-AUS compliant
Inverter must be CSIP-AUS compliant under the current WA framework.
Synergy SSL approved inverter
Needs pairing with a Synergy SSL approved inverter.
VPP activation ready
VPP activation requires a Synergy SSL approved inverter.
WA Battery Scheme rebate
Requires Battery Rewards participation under the current WA framework.
Synergy Battery Rewards
Requires a CSIP-AUS compliant system and reliable internet.
Interest-free loan
Not eligible for interest-free financing.

Under current WA rules, new rebate applications require VPP enrolment and CSIP-AUS compliance. How the scheme works · Estimate VPP earnings

About GROWATT

View Full Profile →

Years in AU Market12+ years

Local SupportNot verified

CEC-Listed Products50 models

12yr AU

CEC-approved products since 2014

12 years in the Australian market

Fault & error codes — GROWATT APX S1

Extracted from the installation manual

13 documented

Showing 13 of 13. The official install manual is the authoritative source — always confirm before acting.

BUS_SHORTcriticalCall your installer
Manual (PDF)
Power cable short-circuited
Likely cause
Check whether the positive and negative terminals are reversely connected.
What to do
Disconnect power immediately and rectify the issue.
CHIP_FAULTcriticalCall your installer
Manual (PDF)
Chip fault protection
Likely cause
Communication loss between two MCUs
What to do
Stop using the battery and contact the installer.
CURRENT_SAMP_FAULTcriticalCall your installer
Manual (PDF)
Current sampling fault
Likely cause
BMS current sampling failure
What to do
Stop using the battery and contact the installer.
DISCHARGE_UVcriticalCall your installer
Manual (PDF)
Discharge under-voltage protection
Likely cause
Single cell voltage is below the threshold for under-voltage protection
What to do
Stop discharging and recharge the battery after rectification.
EEPROM_FAULTcriticalCall your installer
Manual (PDF)
EEPROM fault protection
Likely cause
BMS MCU fails to receive data from EEPROM
What to do
Stop using the battery and contact the installer.
HIGH_TEMPcritical
Manual (PDF)
High temperature protection
Likely cause
The temperature exceeds the BMS protection value
What to do
Stop using the battery immediately and let it cool down.
MAIN_CIRCUIT_FAULTcriticalCall your installer
Manual (PDF)
Main circuit fault
Likely cause
BMS main power circuit failure
What to do
Stop using the battery and contact the installer.
POWER_CONN_FAILcriticalCall your installer
Manual (PDF)
Power cable connection failure
Likely cause
The power cable is disconnected from the hybrid inverter
What to do
Check whether the power cable is securely connected and if the switch is turned ON.
VOLT_SAMP_ANOMALYcriticalCall your installer
Manual (PDF)
Voltage sampling anomaly protection
Likely cause
BMS voltage sampling failure
What to do
Stop using the battery and contact the installer.
ALMwarningCall your installer
Manual (PDF)
Communication with hybrid inverter failed
Likely cause
Communication loss between the hybrid inverter and the APX battery system
What to do
Ensure that the hybrid inverter is powered on. Check if the communication cables are securely connected. If the problem persists, contact the installer.
CHARGE_OVwarning
Manual (PDF)
Charge over-voltage protection
Likely cause
Single cell voltage exceeds threshold for over-voltage protection
What to do
Stop charging; the alarm will disappear.
COM_FAIL_OKwarning
Manual (PDF)
Communication with BM failed
Likely cause
Communication loss between the Control Module and the Battery Module
What to do
Check whether the communication cable is securely connected.
LOW_TEMPinfo
Manual (PDF)
Low temperature protection
Likely cause
The temperature is below the protection value.
What to do
Wait for the temperature to rise; no action is needed.

Perth pricing

Typical installed price

$25,650

WA State RebateSubject to eligibility

Federal STCs-$5,905

After Rebates~$19,745

Prices are estimates. Final pricing depends on installation requirements. STC value is based on the current certificate price of about $39.9.

The WA Battery Scheme rebate (up to $1,300) requires a Synergy-approved (SSL) inverter and VPP enrolment — not all systems qualify, so it is not included above. Confirm eligibility with your installer.

Explore your options

Insufficient Data for Scoring

3 of 5 critical specs available (need 4)

Part of the GROWATT APX S1

See all configurations in this series →

Compare options

Compare this battery with other models to find the best fit for your needs.

Compare Products

How it compares

The GROWATT APX 30.0P-S1 against the closest-sized batteries from other brands.

Specification	GROWATT APX 30.0P-S1GROWATT	Freedom Won Freedom Won LiTE Home 30/24 52VFreedom Won	Sigenergy SigenStor-10S-27.12 (AS4777-2 2020)Sigenergy

Usable capacity?	27 kWh	27 kWh	27 kWh
Continuous power?	7.5 kW	Not verified	Not verified
Peak power?	12 kW	Not verified	Not verified

Round-trip efficiency?	90%	92%best value	92%best value
Warranty	10 years	10 years	10 years
Chemistry	Cobalt Free Lithium Iron Phosphate(LFP)	LFP	LFP

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

GROWATT APX 30.0P-S1

APX S1 series

CEC Approved

View datasheet (PDF)

Part of APX S1 — see all configurations

Usable capacity: 27 kWh
Continuous power: 7.5 kW
Peak power: 12 kW
Round-trip efficiency: 90%
Warranty: 10 yr
Chemistry: Cobalt Free Lithium Iron Phosphate(LFP)

Full specifications

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Cell & chemistry

Chemistry: Cobalt Free Lithium Iron Phosphate(LFP)
Cell type: Lithium Iron Phosphate

Capacity & power

Nominal capacity: 30 kWh
Usable capacity: 27 kWh
Continuous power: 7.5 kW
Peak power: 12 kW
Depth of discharge: 90%
Round-trip efficiency: 90%
Nominal voltage: 650 V

Lifespan & degradation

Cycle life: 10000 cycles
Capacity retained at year 10: 60%
Warranted throughput: 0 MWh

Modularity & stacking

Modular / stackable: Yes
Maximum stack: 30 kWh

Backup & grid services

Backup capable: No
VPP ready: No

Physical

Dimensions (H×W×D): 1250 × 690 × 185 mm
Weight: 321 kg
IP rating: IP66

Operating environment

Operating temperature: -10°C to 50°C

Resources

Datasheet Warranty terms Installation guide

Warranty and support

Warranty terms and Australian support structure.

The 10-year warranty covers defects in battery performance, retaining at least 60% capacity. Warranty voids for misuse or failure to follow guidelines. Claims can be made via Growatt service.

Duration

years

Throughput

∞

MWh

Max Temp

50°

celsius

Max Backup

Level 0

No Backup

Australian support structure

Australian Office12 years in AU market

Growatt Australia

Direct manufacturer warranty. Australian consumer law applies.

Perth climate suitability

Suited to Perth climate

Rated to 50°C, which covers Perth's hottest days.

Key warranty terms

•Depth of Discharge: 90% usable capacity
•Round-trip Efficiency: 90% rated
•Annual Degradation: ~2.5% per year expected
•Installation: Must be installed by SAA-accredited installer
•Operating Conditions: -10°C to 50°C

✗ Non-transferableFull replacement≥60% capacity at year 10

Warranty Document Datasheet Compare Warranties

WA Battery Scheme eligibility

Check eligibility

Synergy SSL inverter pairing, VPP participation and state-rebate qualification for this battery. Rebate and STC amounts are shown in the pricing panel.

CSIP-AUS compliant
Inverter must be CSIP-AUS compliant under the current WA framework.
Synergy SSL approved inverter
Needs pairing with a Synergy SSL approved inverter.
VPP activation ready
VPP activation requires a Synergy SSL approved inverter.
WA Battery Scheme rebate
Requires Battery Rewards participation under the current WA framework.
Synergy Battery Rewards
Requires a CSIP-AUS compliant system and reliable internet.
Interest-free loan
Not eligible for interest-free financing.

Under current WA rules, new rebate applications require VPP enrolment and CSIP-AUS compliance. How the scheme works · Estimate VPP earnings

About GROWATT

View Full Profile →

Years in AU Market12+ years

Local SupportNot verified

CEC-Listed Products50 models

12yr AU

CEC-approved products since 2014

12 years in the Australian market

Fault & error codes — GROWATT APX S1

Extracted from the installation manual

13 documented

Showing 13 of 13. The official install manual is the authoritative source — always confirm before acting.

BUS_SHORTcriticalCall your installer
Manual (PDF)
Power cable short-circuited
Likely cause
Check whether the positive and negative terminals are reversely connected.
What to do
Disconnect power immediately and rectify the issue.
CHIP_FAULTcriticalCall your installer
Manual (PDF)
Chip fault protection
Likely cause
Communication loss between two MCUs
What to do
Stop using the battery and contact the installer.
CURRENT_SAMP_FAULTcriticalCall your installer
Manual (PDF)
Current sampling fault
Likely cause
BMS current sampling failure
What to do
Stop using the battery and contact the installer.
DISCHARGE_UVcriticalCall your installer
Manual (PDF)
Discharge under-voltage protection
Likely cause
Single cell voltage is below the threshold for under-voltage protection
What to do
Stop discharging and recharge the battery after rectification.
EEPROM_FAULTcriticalCall your installer
Manual (PDF)
EEPROM fault protection
Likely cause
BMS MCU fails to receive data from EEPROM
What to do
Stop using the battery and contact the installer.
HIGH_TEMPcritical
Manual (PDF)
High temperature protection
Likely cause
The temperature exceeds the BMS protection value
What to do
Stop using the battery immediately and let it cool down.
MAIN_CIRCUIT_FAULTcriticalCall your installer
Manual (PDF)
Main circuit fault
Likely cause
BMS main power circuit failure
What to do
Stop using the battery and contact the installer.
POWER_CONN_FAILcriticalCall your installer
Manual (PDF)
Power cable connection failure
Likely cause
The power cable is disconnected from the hybrid inverter
What to do
Check whether the power cable is securely connected and if the switch is turned ON.
VOLT_SAMP_ANOMALYcriticalCall your installer
Manual (PDF)
Voltage sampling anomaly protection
Likely cause
BMS voltage sampling failure
What to do
Stop using the battery and contact the installer.
ALMwarningCall your installer
Manual (PDF)
Communication with hybrid inverter failed
Likely cause
Communication loss between the hybrid inverter and the APX battery system
What to do
Ensure that the hybrid inverter is powered on. Check if the communication cables are securely connected. If the problem persists, contact the installer.
CHARGE_OVwarning
Manual (PDF)
Charge over-voltage protection
Likely cause
Single cell voltage exceeds threshold for over-voltage protection
What to do
Stop charging; the alarm will disappear.
COM_FAIL_OKwarning
Manual (PDF)
Communication with BM failed
Likely cause
Communication loss between the Control Module and the Battery Module
What to do
Check whether the communication cable is securely connected.
LOW_TEMPinfo
Manual (PDF)
Low temperature protection
Likely cause
The temperature is below the protection value.
What to do
Wait for the temperature to rise; no action is needed.

Perth pricing

Typical installed price

$25,650

WA State RebateSubject to eligibility

Federal STCs-$5,905

After Rebates~$19,745

Prices are estimates. Final pricing depends on installation requirements. STC value is based on the current certificate price of about $39.9.

Explore your options

Insufficient Data for Scoring

3 of 5 critical specs available (need 4)

Part of the GROWATT APX S1

See all configurations in this series →

Compare options

Compare this battery with other models to find the best fit for your needs.

Compare Products

How it compares

The GROWATT APX 30.0P-S1 against the closest-sized batteries from other brands.

Specification	GROWATT APX 30.0P-S1GROWATT	Freedom Won Freedom Won LiTE Home 30/24 52VFreedom Won	Sigenergy SigenStor-10S-27.12 (AS4777-2 2020)Sigenergy

Usable capacity?	27 kWh	27 kWh	27 kWh
Continuous power?	7.5 kW	Not verified	Not verified
Peak power?	12 kW	Not verified	Not verified

Round-trip efficiency?	90%	92%best value	92%best value
Warranty	10 years	10 years	10 years
Chemistry	Cobalt Free Lithium Iron Phosphate(LFP)	LFP	LFP

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

GROWATT APX 30.0P-S1

Full specifications

Cell & chemistry

Capacity & power

Lifespan & degradation

Modularity & stacking

Backup & grid services

Physical

Operating environment

Australian support structure

Perth climate suitability

Key warranty terms

Fault & error codes — GROWATT APX S1

How it compares

More from GROWATT

GROWATT Inverters

Want to take the next step?

GROWATT APX 30.0P-S1

Full specifications

Cell & chemistry

Capacity & power

Lifespan & degradation

Modularity & stacking

Backup & grid services

Physical

Operating environment

Australian support structure

Perth climate suitability

Key warranty terms

Fault & error codes — GROWATT APX S1

How it compares

More from GROWATT

GROWATT Inverters

Want to take the next step?