Loading Solar Battery Perth...

Home battery · Deye · CEC approved May 2024

Deye GE-F60

A 61.44 kWh home battery — very big home size, the 40+ kWh band.

Installed in Perth, after rebates: ~$48,353; Typical estimate — your own quote will vary
WA Battery Scheme rebate: Depends on your inverter; The scheme needs a Synergy-approved inverter — we don't know yours
Usable capacity: 61.44kWh; Very big home size — the 40+ kWh band

What we can tell you

Read from the figures on this page — no review written yet

61.44 kWh sits in the very big home band (40+ kWh).
It is CEC-approved, which is a condition of both the federal STC discount and the WA Battery Scheme.
We can't score it: a value score needs a price and full specs, and without them any number would be guesswork.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Usable capacity How much energy it stores for you to use: 61.44kWh
Round-trip efficiency How much of the energy you store comes back out: 98%
Depth of discharge How much of the battery you can actually use: 80%
Warranty 70% of capacity guaranteed at the end of it: 5yr
Battery chemistry Lithium iron phosphate — the long-cycle-life type: LFP
Size and weight 548 × 370 × 140 mm — roughly a large suitcase on the wall: 41kg

Full datasheet

Every figure on file for the Deye NA, by section.

Full datasheet, by section
Specification	Value
Cell & chemistry
Chemistry	LFP
Capacity & power
Nominal capacity	5.12 kWh
Usable capacity	61.44 kWh
Depth of discharge	80%
Round-trip efficiency	97.6%
Lifespan & degradation
Capacity retained at year 10	70%
Warranted throughput	16 MWh
Physical
Dimensions (H×W×D)	548 × 370 × 140 mm
Weight	41 kg
IP rating	IP65
Operating environment
Operating temperature	-20°C to 55°C
Installation requirements
AC breaker	40 A
Cable gauge	6 mm²

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Documents

Warranty and support

Warranty terms and Australian support structure.

This warranty covers defects in materials and workmanship for 10 years. Major exclusions include improper installation and unauthorized modifications. To make a claim, report in writing to NINGBO DEYE ESS or a partner with necessary details.

Duration

years

Throughput

MWh

Max Temp

55°

celsius

Max Backup

Level 0

No Backup

Australian support structure

Not verified

We have not verified this brand's Australian support structure. Confirm warranty arrangements with the manufacturer or your installer.

Perth climate suitability

Suited to Perth climate

Rated to 55°C, which covers Perth's hottest days.

Key warranty terms

•Depth of Discharge: 80% usable capacity
•Round-trip Efficiency: 98% rated
•Annual Degradation: ~2.5% per year expected
•Installation: Must be installed by SAA-accredited installer
•Operating Conditions: -20°C to 55°C

✗ Non-transferableFull replacement≥70% capacity at year 10

Warranty Document Datasheet Compare Warranties

WA Battery Scheme eligibility

Conditional

Synergy SSL inverter pairing, VPP participation and state-rebate qualification for this battery. Rebate and STC amounts are shown in the pricing panel.

AC-coupled system: needs a gateway device on the Synergy SSL (e.g. SMA, Redback), or a same-brand inverter + battery pair (Sungrow or Fronius) for shared compliance. Without one, export is limited to 1.5kW and VPP/DEBS/rebate/loan are unavailable — and third-party gateways can struggle to meet compliance testing. Any later addition to an AC-coupled system triggers whole-of-site compliance, so for many homes replacing toward a hybrid (DC-coupled) inverter is the sounder path. AC vs DC coupling

CSIP-AUS compliant
Inverter must be CSIP-AUS compliant under the current WA framework.
Synergy SSL approved inverter
Needs pairing with a Synergy SSL approved inverter.
VPP activation ready
VPP activation requires a Synergy SSL approved inverter.
WA Battery Scheme rebate
Requires Battery Rewards participation under the current WA framework.
Synergy Battery Rewards
Requires a CSIP-AUS compliant system and reliable internet.
Interest-free loan
Not eligible for interest-free financing.

Under current WA rules, new rebate applications require VPP enrolment and CSIP-AUS compliance. How the scheme works · Estimate VPP earnings

About Deye

View Full Profile →

Years in AU Market6+ years

Local SupportNot verified

CEC-Listed Products53 models

6yr AU

CEC-approved products since 2020

6 years in the Australian market

Fault & error codes — Deye NA

Extracted from the installation manual

7 documented

Showing 7 of 7. The official install manual is the authoritative source — always confirm before acting.

BMS faultcriticalCall your installer
Manual (PDF)
BMS fault detected
Likely cause
The cell voltage sampling circuit is faulty or the cell temperature sampling circuit is faulty
What to do
Replace the battery.
Charge low temperature protectioncriticalCall your installer
Manual (PDF)
Battery temperature is too low for charging
Likely cause
Low ambient temperature
What to do
Contact local engineers to rectify the fault.
Charge or discharge high temperature protectioncriticalCall your installer
Manual (PDF)
Battery temperature exceeds safe levels
Likely cause
High ambient temperature
What to do
Contact local engineers to rectify the fault.
Discharge low temperature protectioncriticalCall your installer
Manual (PDF)
Battery temperature is too low for discharging
Likely cause
Low ambient temperature
What to do
Contact local engineers to rectify the fault.
Electrochemical cell faultcriticalCall your installer
Manual (PDF)
Cell voltage low or unbalanced
Likely cause
Due to self-discharge or external damage
What to do
Replace the battery.
Overvoltage protectioncriticalCall your installer
Manual (PDF)
Battery voltage exceeds safe levels
Likely cause
Input voltage exceeds normal value or cells are inconsistent
What to do
Contact local engineers to rectify the fault.
Under voltage protectioncriticalCall your installer
Manual (PDF)
Battery voltage is too low
Likely cause
Long mains power failure or inconsistent cells
What to do
Contact local engineers to rectify the fault.

What it costs in Perth

$55,296

Typical installed price, before rebates

WA Battery Scheme: Depends on your inverter
Federal STCs: −$6,943
You’d pay about: $48,353

The WA Battery Scheme (up to $1,300) needs a Synergy-approved inverter and VPP enrolment. We don't know which inverter you'd pair this with, so it isn't deducted above — ask your installer. STCs assume about $39.9 a certificate. Estimates only; your quote will vary.

Explore your options

Which size band is your home?

Usable capacity, for one battery system

Smaller home: 10–15 kWh
Medium home: 20–30 kWh
Big home: 30–40 kWh
Very big home: 40+ kWh

This battery is one unit in the very big home band. The WA rebate caps at 10 kWh, but that is a rebate limit, not a sizing guide.

The federal rebate shrinks each year

STC value for this 61.44 kWh battery

Frequently asked questions

How it compares

The Deye GE-F60 against the closest-sized batteries from other brands.

Specification	Deye GE-F60Deye	DMEGC H02-60DMEGC	Dyness STACK100 Pro-12SDyness

Usable capacity?	61.44 kWh	61.44 kWh	61.44 kWh
Continuous power?	Not verified	Not verified	Not verified
Peak power?	Not verified	Not verified	Not verified

Round-trip efficiency?	98%best value	92%	92%
Warranty	5 years	10 yearsbest value	10 yearsbest value
Chemistry	LFP	LFP	LFP

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

More from Deye

Other CEC-approved products from Deye available in Australia.

Deye Inverters

AI-W5.1-10P1-AU-B (AS4777-2 2020)

9.999 kW · 1φ

AI-W5.1-10P3-AU-B (AS4777-2 2020)

10 kW · 3φ

AI-W5.1-12P3-AU-B (AS4777-2 2020)

12 kW · 3φ

AI-W5.1-3.6P1-AU-B (AS4777-2 2020)

3.6 kW · 1φ

AI-W5.1-5P1-AU-B (AS4777-2 2020)

5 kW · 1φ

AI-W5.1-5P3-AU-B (AS4777-2 2020)

5 kW · 3φ

View all Deye inverters

View full Deye manufacturer profile

Want to take the next step?

Compare quotes from SAA-accredited local installers — you choose which to act on. No obligation.

This model is one entry in the desk's index of solar batteries for Perth — every CEC-approved battery on one comparable dataset.

Product Information Disclaimer:

Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.

Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.