Batteries8 listed
- Approved models
- 8
- Usable capacity
- 9.3-46.2 kWh
- Chemistry
- LFP
Sumray · manufacturer profile
Battery manufacturer
Specifications and pricing change. Confirm them with the manufacturer.
Sumray builds its home batteries from big modules, so a home gets a large stack in few pieces: up to four 13.92 kWh modules on the SR-LV14G and up to six modules of 9.25 kWh usable on the SR-LV10G. Both run through another maker's inverter, and the warranty asks for a Solis one or Sumray's compatibility check first. A warranty claim goes to Sumray in China through the installer or distributor, and the only Australian contact named is an importer in Parramatta: Sumray itself was registered in July 2024 and holds no Australian business number. Both ranges are approved for installation in Australia, with 15 years of warranty on the SR-LV14G and 10 on the SR-LV10G. On the WA rebate: the inverter decides it. Every Deye model and 21 of the 23 Solis models on Sumray's compatibility sheets were on Synergy's list dated 30 October 2026. A Sumray battery on one of them pairs with an inverter listed for battery storage on Synergy's list. Other scheme conditions apply.
Worth knowing. Sumray was registered in July 2024 and its warranties name an importer as the local contact, not a Sumray company in Australia, so ask the installer who handles a claim if that importer changes.
Solar Battery Perth is independent. We're not owned by an energy retailer or a manufacturer. It is the WA solar and battery library: real product and install information, honest comparisons, and a matcher that sizes to the home, not to a sales target. Installers quote the actual price.
In this review
Sumray in China decides a claim, once the installer or distributor has passed it on. The Australian contact the warranties name is the importer, Solar System Pty Ltd of Parramatta. Sumray itself is a company registered in July 2024, and no Sumray company holds an Australian business number, so the importer is the only local contact the documents give.
A maker in China and only an importer here matters more than the registration date on its own. A 15-year warranty is a promise from a company a little over two years old, and the warranties name no Sumray office here to take a claim if the importer changes. Ask the installer who would handle one.
Two ranges of stackable floor-standing batteries are on the Clean Energy Council's approved list. The SR-LV14G is built from 13.92 kWh modules and the SR-LV10G from modules of 9.25 kWh usable, both of lithium iron phosphate (LFP) cells. Sumray has no inverter or solar panel on the approved lists, so every Sumray stack runs through another maker's inverter.
The two ranges are one idea at two module sizes. The SR-LV14G label is all usable energy: Sumray rates the module at 100% depth of discharge, the share of the battery you are allowed to drain. On the SR-LV10G 94% is usable, so a module rated at 9.84 kWh gives 9.25 kWh.
Up to 55.68 kWh on the SR-LV14G with four modules, and 55.5 kWh on the SR-LV10G with six. Storage grows in whole modules, so an SR-LV14G holds 13.92, 27.84, 41.76 or 55.68 kWh and nothing in between. Power, how much the battery can run at once, rises with the stack and stops at 14.4 kW.
Power is where the module count matters most for the evening. One module runs 4.8 kW of the house at once and two run 9.6 kW on either range. From three modules up the figure is 14.4 kW, which the SR-LV10G reaches at 27.74 kWh and the SR-LV14G at 41.76 kWh. Those are battery-side figures, so the inverter can set a lower limit. A fourth SR-LV14G module adds storage and no extra power.
At about 120 kg a module and about 450 kg for four, an SR-LV14G stack goes where the floor can carry it, on a footprint of 850 by 440 mm. An SR-LV10G module is about 100 kg and the six-module stack about 550 kg, on 700 by 440 mm. The manuals ask for hard, level ground and a surface solid enough to carry the weight.
The SR-LV14G manual allows capacity expansion to a maximum of four modules. No Sumray document we read says how a module is added after installation, so size the stack for the home as it is.
A Solis inverter, or another brand Sumray has checked first. Sumray's sheets name Solis and Deye models, mostly hybrid inverters (one box for the solar panels and the battery). The four Solis S6-EA1P models are battery inverters with no solar input, so the panels need their own. The warranty lists the check as a precondition, so get it in writing.
The sheets list the compatible models as ranges, so check that the exact model on the quote sits inside one of them, and remember the sheet is not Sumray's written check:
It depends on the inverter the quote names. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. Every Deye model and 21 of the 23 Solis models on Sumray's compatibility sheets were on Synergy's list dated 30 October 2026. A Sumray battery on one of them pairs with an inverter listed for battery storage on Synergy's list.
The list names inverters model by model and changes over time. We update this page when a listing changes, and the scheme's other rules are in our WA battery rebate guide.
That all ten models are approved for installation in Australia. Solar Battery Perth's read of the approved battery list, in data dated 20 October 2026, found them approved on 3 June 2026 and listed until 31 December 2027 under the brand name SUMRAY. That listing is what lets an installer fit one.
The council had not de-listed or suspended any Sumray product as at 22 October 2026, and our product safety alerts register carried no Sumray recall, on a listing a little over four months old. There is little history to read either way.
By length and by the capacity promise. The SR-LV14G carries 15 years and promises at least 60% of usable energy, about 8.4 kWh of each 13.92 kWh module. The SR-LV10G carries 10 years and promises 70%, about 6.5 kWh of each 9.25 kWh module. Each promise ends earlier if a cycle count or an energy limit arrives first.
Those limits are 10,000 full cycles or 83.5 MWh (83,500 kWh) through each module on the SR-LV14G. On the SR-LV10G they are 6,000 full cycles or an energy limit of 38.8 MWh for one module, rising to 231.1 MWh for six. The warranties cover one full cycle a day (empty to full and back), and at that rate the years run out first on both ranges.
Both warranties ask for installation within six months of the manufacture date, so ask for the manufacture date on the quote. The battery must sit out of direct sunlight where it stays between -10°C and 50°C. Damage from exposure to the sea coast or salt water is excluded unless Sumray approved the site in writing before installation, and neither document gives a distance from the sea. The warranties apply to batteries made after 1 January 2026, bought through an authorised channel and installed in Australia or New Zealand.
Once a claim reaches Sumray, Sumray chooses the remedy: a software fix, a repair, or an exchange for a new or refurbished battery. Transport is covered in some areas up to an amount the warranty does not publish, and Sumray may contribute towards on-site labour at its discretion. The warranty gives two reporting deadlines, two weeks from a fault appearing and one month from the failure date, so reporting within two weeks meets both. Your Australian Consumer Law guarantees apply as well, and the warranties say they do not exclude them.
On hard, level ground out of the sun: the garage floor, or a sheltered spot the afternoon sun does not reach. Both ranges carry an IP66 rating (sealed against dust and water jets) and both datasheets say the rating makes them safer for outdoor use. The manuals ask for a sheltered spot or a sunshade.
The modules charge between 0°C and 50°C and discharge down to -20°C on both ranges, so a Perth summer afternoon in the shade sits inside the range. None of the documents gives a backup switchover time (how fast the battery takes over in a blackout), so ask the installer what the paired inverter does in an outage.
We cannot name a Perth supplier yet. The only named contact is the New South Wales importer, and no document we read names a Western Australian distributor or a supply date. The batteries are approved for installation across Australia, so an installer quoting one should be able to say where it comes from and when it can go in.
The model code on the quote should match a register row, SR-LV14G-L1 to L4 or SR-LV10G-L1 to L6. Perth installers on our list can say whether they fit Sumray, and the battery price index has our installed-price ranges for 10 and 20 kWh, and the rebates.
A Sumray battery is a floor stack built in one to four 13.92 kWh modules on the SR-LV14G, or one to six modules of 9.25 kWh usable on the SR-LV10G. In a Perth garage it stands on hard level ground beside another maker's inverter, out of the direct sun the warranty excludes. The warranty asks for a Solis inverter or Sumray's compatibility check first. Sumray's sheets name Solis and Deye models. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. Every Deye model and 21 of the 23 Solis models on Sumray's compatibility sheets were on Synergy's list dated 30 October 2026. A Sumray battery on one of them pairs with an inverter listed for battery storage on Synergy's list.
Get the inverter's exact model code on the quote. If it is not a Solis, get Sumray's compatibility check in writing before installation, because the warranty asks for it.
Each product type at a glance. The full lists, grouped by series, are below.
Grouped by series. Open a series for each variant, or a model for full specs.
8 CEC-approved batteries · grouped into 2 series
What we have verified about Sumray in Australia, and what we haven't.
What has happened to Sumray on the CEC register.
Each block is one register event. Tap a year to see its events in the list below.
First CEC Approval
Received initial Clean Energy Council certification.
🔋 First CEC-Approved Battery
Sumray entered the Australian battery market with SR-LV10G-L1.
Sumray is headquartered in Wujiang District, Suzhou, China and was founded in 2024. Its products are sold in Australia through SAA-accredited installers.
Yes. Sumray entered the Australian market in 2026, and its products are installed across Perth and Western Australia by SAA-accredited installers. Confirm local support and warranty handling with your installer before you buy.
Sumray's home batteries use LFP cells. LFP (lithium iron phosphate) is the most common residential chemistry in WA for its long cycle life and stability in Perth's heat.
WA's rebate ($130/kWh, up to $1,300) depends on whether the system pairs with an inverter listed for battery storage on Synergy's list. Eligibility is set by the inverter, not the battery brand. Whether a given Sumray system qualifies depends on the inverter it's installed with, so confirm the pairing with your installer.
Solar Battery Perth lists 8 CEC-approved Sumray battery models with specs, indicative pricing and warranty detail. Compare them against other brands to find the best fit for your Perth home.
Two modular systems Perth buyers often shortlist together, compared spec by spec.
Synergy customers get $130/kWh back, capped at $1,300.
A 10 kWh usable LFP tower that stacks in 5 kWh modules, with a 10-year warranty.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.
Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.