Loading Solar Battery Perth...
Haitai · manufacturer profile
Solar panel manufacturer · in Australia since 2021
Specifications and pricing change — confirm them with the manufacturer.
Quick answer
Haitai has 60 panels listed on the CEC register, and has been in the Australian market since 2021.
Sources: CEC register
2006
Founded
2019
AU entry
Haitai is a solar panel manufacturer with CEC-approved photovoltaic modules available in the Australian market. Its product range centres on the HT series of panels, built around mainstream silicon cell technology rather than any battery or energy-storage line.
The company's modules use PERC and TOPCon cell technology with a half-cut cell design. Half-cut cells split each cell in two to lower resistive losses and improve performance under partial shading, while TOPCon (tunnel oxide passivated contact) is a higher-efficiency cell architecture that has become common across residential panels for its improved low-light yield and temperature behaviour. These are module-level technologies; the entry lists no battery chemistry and no integrated storage system.
For Perth homeowners, panel efficiency matters because of the region's strong solar resource of roughly 5.0 peak sun hours per day, which lets a well-specified array generate significant daytime output and offset usage billed at the Synergy A1 tariff. As with any panel brand, confirm the product warranty, performance-degradation terms, and local service support, and check your SAA-accredited installer's experience with the brand before purchase.
We welcome manufacturers to help keep their profile accurate and up to date.
Each product type at a glance. The full lists, grouped by series, are below.
We haven't reviewed Haitai panels in depth yet. We don't hold pricing, warranty terms or a series review for them, so confirm those with your installer. Compare panels from other brands
Grouped by series. Open a series for each variant, or a model for full specs.
20 CEC-approved panels, 40 not currently listed · grouped into 39 series · showing first 50 of 60
What we have verified about Haitai in Australia, and what we haven't.
Haitai has sold in Australia since 2021. Here is what has happened on the CEC register since then.
Each block is one register event. Tap a year to see its events in the list below.
First CEC Approval
Received initial Clean Energy Council certification.
☀️ First CEC-Approved Solar Panel
Haitai entered Australian panel market with HTM360MH3-60.
☀️ 50 Panel Models Listed
Panel range expanded to 50 CEC-approved models.
Haitai is headquartered in Tangshan, China and was founded in 2006. Its products are sold in Australia through CEC-accredited installers.
Yes. Haitai entered the Australian market in 2019, and its products are installed across Perth and Western Australia by SAA-accredited installers. Confirm local support and warranty handling with your installer before you buy.
Haitai has held Clean Energy Council approved-product listings since 2019. CEC approval is a baseline safety and quality check, and rebates are only paid on approved products.
Haitai has 20 CEC-approved panel models from 425–640 W.
Two modular systems Perth buyers often shortlist together, compared spec by spec.
Synergy customers get $130/kWh back, capped at $1,300.
A 10 kWh usable LFP tower that stacks in 5 kWh modules, with a 10-year warranty.
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.
Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.
