What are the parts of a battery warranty?
Most battery warranties have three parts. The product warranty covers defects in materials and workmanship. The capacity warranty sets the least storage the battery must still hold at the end of the term. Many add a throughput limit, which caps the total energy the battery can move while it is covered.
The product warranty usually covers a failed battery management system (the electronics that protect the cells), cells that fail on their own, and monitoring, communication or firmware faults. It usually leaves out damage from a poor install, physical or water damage, and damage from running the battery with gear the maker has not approved.
Here is the part most people miss. The years are only the headline. A long term with a small throughput cap, or a low share of capacity at the end, can be weaker than it looks. Each maker sets its own terms, and our battery warranty comparison lines up the years, cycle limits, energy caps and end-of-term capacity for each battery range, from the makers' own warranty documents.
What is a throughput cap?
A throughput cap is the total energy, in kilowatt-hours (kWh), that a battery is warranted to move over its life. The warranty ends at the year term or the cap, whichever comes first. Makers state it in different ways: per kWh of capacity, per module, or as a number of full charge cycles.
To compare two batteries, turn each cap into the same unit, such as kWh moved per kWh of capacity. Then think about how hard you plan to work it. A battery that cycles twice a day reaches its cap far sooner than one that cycles now and then. The battery warranty calculator works out which limit a battery reaches first.
Does joining a VPP affect my battery warranty?
It can. A virtual power plant (VPP) draws on your battery at busy times on the grid, which adds cycles. Some warranties treat that as a use outside daily self-consumption and backup, and a throughput cap then applies where none did before. Read how your warranty treats VPP use before you join one.
That matters in Perth, because the WA Battery Scheme is paid to Synergy customers who join a VPP. Sungrow's HV battery warranty shows how it can play out (Version 9.0, which we read in full on 8 October 2026). It does not mention VPPs at all. Any use other than daily self-consumption and backup, even part of the time, falls under its throughput cap instead of unlimited cycles.
Our guide to whether VPP cycling wears a battery works through how VPP events count against a warranty's limits.
What is battery degradation, and how much is normal?
Battery degradation is the slow loss of storage every lithium battery has as it ages. Some loss each year is normal, not a fault. The warranty sets a floor: the share of the original capacity the battery must still hold at the end of the term. Above that floor, the fade is normal ageing.
Two things wear a battery down, and both happen at once. Cycle ageing comes from each charge and discharge, which leaves a small, lasting change in the cells. The throughput cap is how makers put a limit on it. Calendar ageing happens with time, however much the battery cycles, and heat speeds it up.
To plan for it, find the end-of-term share in your battery's warranty and multiply it by the battery's usable capacity today. That gives you the least storage to count on in the last years of cover.
Does Perth heat shorten a battery's life?
Heat speeds up calendar ageing, so where the battery sits matters in Perth. A battery on a west-facing garage wall in full afternoon sun runs hotter, and ages faster, than the same model on a shaded south- or east-facing wall or in a vented enclosure.
At least one maker now puts this in writing. For batteries installed from 21 May 2026, Sungrow's HV warranty sets yearly limits on how many hot days the battery sees, and outside those limits its capacity and throughput cover may not apply. Our battery placement guide sets out where a battery can go.
How do I size a battery for degradation?
Size it with a little room to spare. A battery that exactly matches today's evening use has nothing left over once it starts to fade. Choose one a bit larger than your current evening and overnight use, so it still covers that load in the later years of its warranty.
How hard you work it matters too. One shallow cycle a day ages a battery slowly, while heavy daily cycling reaches the throughput cap sooner. Our guide to what size battery you need for a Perth home works through the numbers, and the battery matcher starts from your own daily use.
Which battery settings slow the fade?
Three settings slow the fade: charge limits, charge speed and a backup reserve. Your installer can set each one, and following their recommended settings for your product is the safe default.
- Charge limits. Keeping the battery away from completely full or empty is easier on the cells. Most systems let you set a lowest and highest charge level.
- Charge speed. Charging more slowly makes less heat inside the cells. If a large solar array would fast-charge the battery every day, a power cap helps.
- A backup reserve. If blackout cover matters to you, hold back some charge so the battery is never empty when an outage hits. Read how battery backup works in a blackout before you set it.
What can void or limit a battery warranty?
Most battery warranties come with conditions. The usual ones cover who installs it, how it is installed, the conditions it runs in and when it is registered. Break one and a claim gets harder, even when the fault is real. The clauses vary by brand and model, so the warranty for your exact product is the guide.
- The install. An accredited installer, the maker's installation guide followed, and approved mounting and electrical parts.
- How it runs. A temperature range, the fastest charge and discharge rates, how full or empty it is kept, grid connection needs and, in some, firmware updates.
- Registration. Within a set time, sometimes with an online account or the commissioning report (the installer's record of switching the system on).
For a clause-by-clause example, see how to judge the brand behind a battery, which reads the connection, coastal and claim-window clauses on two current warranties.
How do my consumer rights work alongside the warranty?
The Australian Consumer Law gives you automatic consumer guarantees whatever the warranty says, and they cannot be signed away. A battery must be of acceptable quality, fit for its purpose and match its description. The guarantee of acceptable quality can apply after a warranty ends, so a right to a repair, replacement or refund can outlast it.
If something goes wrong, the claim usually starts with the business that sold the battery. Our battery warranty claims guide covers who to contact first, what records to keep, and where to go in WA if a claim is refused.
What should I compare between battery warranties?
Compare five things, not just the years. Each one changes what the warranty is worth on a bad day, and two warranties with the same term can differ on all of them. Read them in the current warranty for the exact model on your quote.
- The term in years.
- The share of capacity it must still hold at the end.
- The throughput cap, which matters most if you plan to work the battery hard.
- Who handles a claim in Australia, and whether you can reach them.
- The replacement terms: a new unit, a refurbished one, or a prorated credit.
Questions people ask
Is normal capacity loss a warranty claim?
No. Losing some capacity each year is normal ageing. A capacity claim arises only if the battery falls below the share its warranty promises before the term ends. How that remaining capacity is measured differs between makers, so read that part of the document too.
Do I need to register my battery warranty?
Some makers ask for registration within a set time. If you miss it you may still have your consumer guarantees, but proving when the battery was bought gets harder. Register it soon after the install and keep the installer's paperwork.
Is a warranty replacement new or refurbished?
The warranty says. Some replace the faulty part and some the whole unit, which may be new or refurbished. Others give a prorated credit. Ask your installer for the replacement terms in writing before you sign.
Do firmware updates matter for the warranty?
They can. Some warranties expect the battery's software to be kept up to date. Leave the system online so it can update, and note any fault messages the app shows.
About this guide. Solar Battery Perth is a Perth library of solar and battery information. Our editorial team writes these guides from the Clean Energy Council product list, Synergy's published scheme rules and the WA Government's guidance, and dates every page when it changes.
What should you do next?
The detail most quotes leave out is how the warranty treats the way you plan to use the battery. Ask your installer for the warranty document for the exact model, in writing, and ask whether VPP use counts as daily self-consumption. Once it is installed, keep that document, the installer's paperwork and photos of where the battery sits in one place, because that file is what a claim leans on. Then see which batteries suit your home.
