Loading Solar Battery Perth...

Hybrid inverter · Tempo · HBI series · CEC approved November 2025

Tempo SP-6KW-HBI

CEC listing: SP-6KW-HBI (AS4777-2 2020)

A 6 kW single-phase hybrid inverter that is battery-ready.

Installed in Perth, typical: ~$2,850; Estimate for the inverter alone — your quote will vary
Rated power: 6kW; How much solar it can run at once
Battery-ready: Yes; Hybrid: a battery plugs straight in, no second box

Datasheet (PDF)Compare inverters See the whole HBI series

What we can tell you

Read from the figures on this page. No review written yet.

It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
It runs on a standard single-phase supply.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power How much solar it can turn into usable power at once: 6kW
Phases Runs on a standard single-phase supply: Single
Type Runs solar and a battery from one unit: Hybrid

Full datasheet

Every figure on file for the Tempo SP-6KW-HBI, by section.

Full datasheet, by section
Specification	Value
Physical
IP rating	IP65

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features & compatibility

Battery compatible

Yes

Backup capable

Yes

CEC approval details

CEC approved

10 Nov 2025

Approval expiry

27 Oct 2027

Status

Active

Eligible for rebates

Yes

About Tempo (Aust) Pty Ltd

Years in AU Market

4 years

Australian Office

Not verified

CEC-Approved Batteries

CEC-Approved Panels

What it costs in Perth

Typical installed, inverter only

$2,100–$3,600

Estimate confidence: Medium

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 25.5 kWh
Annual yield: 9,308 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

4 years in Australian market

How it compares

The Tempo SP-6KW-HBI against the closest-power inverters from other brands.

Specification	Tempo SP-6KW-HBITempo	Energizer FORCE 6.0HSEnergizer	Energizer Force 6.0HT+Energizer

Rated power?	6 kW	6 kW	6 kW
Max efficiency?	0.0%	0.0%	0.0%
MPPT trackers?	Not verified	Not verified	Not verified

Phases	Single-phase	Single-phase	Three-phase
Type	Hybrid	Hybrid	Hybrid
Battery ready	Yes	Yes	Yes
Warranty	0 years	Not verified	Not verified

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Documents

Warranty summary

This warranty covers manufacturing defects when installed correctly by a licensed installer. Exclusions include improper installation, modifications, and use in unsuitable environments.

0-year inverter warranty

Tempo SP-6KW-HBI

This warranty covers manufacturing defects when installed correctly by a licensed installer. Exclusions include improper installation, modifications, and use in unsuitable environments.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Does not transfer with the home
What voids it: Warranty void if not installed by a registered and licensed installer, altered, or if installation is not in accordance with relevant instructions.
Environment limits: The inverter should not be exposed to direct sunlight, water, rain, snow, or spray.

Read the official warranty document (PDF)

Fault & error codes — Tempo SP-6KW-HBI

From the install manual

8 documented

Showing 8 of 8. The official install manual is the authoritative source — always confirm before acting.

F08criticalCall your installer
Manual (PDF)
AC side leakage current over
Likely cause
Check AC insulation and ground wires connect ground is well or not, then repair it
What to do
Power off, then restart. If those faults occur continuously and frequently, please ask help for local distributors.
A01warning
Manual (PDF)
PV connection type different from setup
Likely cause
Check PV modules connection
What to do
Check PV Mode setup Ref. Chapter 5.3.
A02warning
Manual (PDF)
ISO check among PV panels/wires and ground is abnormal
Likely cause
Check PV modules wires, those wires are soaked or damaged, and then carry out rectification
What to do
If the fault occurs continuously and frequently, please ask help for local distributors.
A03warning
Manual (PDF)
PV current arcing
Likely cause
Check PV modules wires and connectors broken or loose, and then carry out rectification
What to do
If the fault occurs continuously and frequently, please ask help for local distributors.
A04warningCall your installer
Manual (PDF)
PV Voltage over
Likely cause
Reconfiguration of PV strings, reduce the PV number of a PV string to reduce inverter PV input voltage
What to do
Suggestion that contacting with local distributors.
A16warning
Manual (PDF)
PV(+) and PV(-) reversed Connection
Likely cause
Check PV(+) and PV(-) Connection whether reversed or not
What to do
If reversed, make correction.
B01warningCall your installer
Manual (PDF)
Battery voltage over or under
Likely cause
Check inverters connected battery lines and connectors broken or loose connect
What to do
Carry out rectification if broken or loose. Checking battery voltage is abnormal or not, then maintenance or change new battery.
C01Gwarning
Manual (PDF)
Grid lost (islanding)
Likely cause
Check inverter connected with grid connectors and cable normal or not.
What to do
Inverter will restart automatically when the grid return to normal.

Part of the Tempo HBI series

Compare every Tempo HBI variant side by side →

More Tempo (Aust) Pty Ltd Inverters

AKE-4.6KW-HBI (AS4777-2 2020)

4.6 kW · 1φ

AKE-5.5KW-HBI (AS4777-2 2020)

5.5 kW · 1φ

AKE-5KW-HBI (AS4777-2 2020)

5 kW · 1φ

AKE-6KW-HBI (AS4777-2 2020)

6 kW · 1φ

AS-4.6KW-HBI (AS4777-2 2020)

4.6 kW · 1φ

AS-5.5KW-HBI (AS4777-2 2020)

5.5 kW · 1φ

View all Tempo (Aust) Pty Ltd inverters

More from Tempo (Aust) Pty Ltd

Other CEC-approved products from Tempo (Aust) Pty Ltd available in Australia.

Tempo (Aust) Pty Ltd Solar Panels

AKE-380B-PV-MHL (IEC 61215-2021)

380W · 19.5% · Mono PERC

AKE-410B-PV-MHO (IEC 61215-2021)

410W · 21.0% · Mono PERC

AKE-450B-PV-MHO (IEC 61215-2021)

450W · 23.0% · Mono PERC

AKE-540B-PV-MHO (IEC 61215-2021)

540W · 24.0% · Mono PERC

AKE-660B-PV-MHG (IEC 61215-2021)

660W · 24.0% · Mono PERC

AKE-PV380B-60M-H6

380W · 19.5% · Mono PERC

View all Tempo (Aust) Pty Ltd panels

View full Tempo (Aust) Pty Ltd manufacturer profile

Want to take the next step?

Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Hybrid inverter · Tempo · HBI series · CEC approved November 2025

Tempo SP-6KW-HBI

CEC listing: SP-6KW-HBI (AS4777-2 2020)

A 6 kW single-phase hybrid inverter that is battery-ready.

Installed in Perth, typical: ~$2,850; Estimate for the inverter alone — your quote will vary
Rated power: 6kW; How much solar it can run at once
Battery-ready: Yes; Hybrid: a battery plugs straight in, no second box

Datasheet (PDF)Compare inverters See the whole HBI series

Spotted something outdated?

What we can tell you

Read from the figures on this page. No review written yet.

It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
It runs on a standard single-phase supply.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power How much solar it can turn into usable power at once: 6kW
Phases Runs on a standard single-phase supply: Single
Type Runs solar and a battery from one unit: Hybrid

Full datasheet

Every figure on file for the Tempo SP-6KW-HBI, by section.

Full datasheet, by section
Specification	Value
Physical
IP rating	IP65

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features & compatibility

Battery compatible

Yes

Backup capable

Yes

CEC approval details

CEC approved

10 Nov 2025

Approval expiry

27 Oct 2027

Status

Active

Eligible for rebates

Yes

About Tempo (Aust) Pty Ltd

Years in AU Market

4 years

Australian Office

Not verified

CEC-Approved Batteries

CEC-Approved Panels

What it costs in Perth

Typical installed, inverter only

$2,100–$3,600

Estimate confidence: Medium

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 25.5 kWh
Annual yield: 9,308 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

4 years in Australian market

How it compares

The Tempo SP-6KW-HBI against the closest-power inverters from other brands.

Specification	Tempo SP-6KW-HBITempo	Energizer FORCE 6.0HSEnergizer	Energizer Force 6.0HT+Energizer

Rated power?	6 kW	6 kW	6 kW
Max efficiency?	0.0%	0.0%	0.0%
MPPT trackers?	Not verified	Not verified	Not verified

Phases	Single-phase	Single-phase	Three-phase
Type	Hybrid	Hybrid	Hybrid
Battery ready	Yes	Yes	Yes
Warranty	0 years	Not verified	Not verified

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Documents

Warranty summary

This warranty covers manufacturing defects when installed correctly by a licensed installer. Exclusions include improper installation, modifications, and use in unsuitable environments.

0-year inverter warranty

Tempo SP-6KW-HBI

This warranty covers manufacturing defects when installed correctly by a licensed installer. Exclusions include improper installation, modifications, and use in unsuitable environments.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Does not transfer with the home
What voids it: Warranty void if not installed by a registered and licensed installer, altered, or if installation is not in accordance with relevant instructions.
Environment limits: The inverter should not be exposed to direct sunlight, water, rain, snow, or spray.

Read the official warranty document (PDF)

Fault & error codes — Tempo SP-6KW-HBI

From the install manual

8 documented

Showing 8 of 8. The official install manual is the authoritative source — always confirm before acting.

F08criticalCall your installer
Manual (PDF)
AC side leakage current over
Likely cause
Check AC insulation and ground wires connect ground is well or not, then repair it
What to do
Power off, then restart. If those faults occur continuously and frequently, please ask help for local distributors.
A01warning
Manual (PDF)
PV connection type different from setup
Likely cause
Check PV modules connection
What to do
Check PV Mode setup Ref. Chapter 5.3.
A02warning
Manual (PDF)
ISO check among PV panels/wires and ground is abnormal
Likely cause
Check PV modules wires, those wires are soaked or damaged, and then carry out rectification
What to do
If the fault occurs continuously and frequently, please ask help for local distributors.
A03warning
Manual (PDF)
PV current arcing
Likely cause
Check PV modules wires and connectors broken or loose, and then carry out rectification
What to do
If the fault occurs continuously and frequently, please ask help for local distributors.
A04warningCall your installer
Manual (PDF)
PV Voltage over
Likely cause
Reconfiguration of PV strings, reduce the PV number of a PV string to reduce inverter PV input voltage
What to do
Suggestion that contacting with local distributors.
A16warning
Manual (PDF)
PV(+) and PV(-) reversed Connection
Likely cause
Check PV(+) and PV(-) Connection whether reversed or not
What to do
If reversed, make correction.
B01warningCall your installer
Manual (PDF)
Battery voltage over or under
Likely cause
Check inverters connected battery lines and connectors broken or loose connect
What to do
Carry out rectification if broken or loose. Checking battery voltage is abnormal or not, then maintenance or change new battery.
C01Gwarning
Manual (PDF)
Grid lost (islanding)
Likely cause
Check inverter connected with grid connectors and cable normal or not.
What to do
Inverter will restart automatically when the grid return to normal.

Part of the Tempo HBI series

Compare every Tempo HBI variant side by side →

More Tempo (Aust) Pty Ltd Inverters

AKE-4.6KW-HBI (AS4777-2 2020)

4.6 kW · 1φ

AKE-5.5KW-HBI (AS4777-2 2020)

5.5 kW · 1φ

AKE-5KW-HBI (AS4777-2 2020)

5 kW · 1φ

AKE-6KW-HBI (AS4777-2 2020)

6 kW · 1φ

AS-4.6KW-HBI (AS4777-2 2020)

4.6 kW · 1φ

AS-5.5KW-HBI (AS4777-2 2020)

5.5 kW · 1φ

View all Tempo (Aust) Pty Ltd inverters