Hybrid inverter · Tempo · CEC approved November 2025
CEC listing: AS-5KW-HBI (AS4777-2 2020)
A 5 kW single-phase hybrid inverter that is battery-ready.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us
Every figure on file for the Tempo AS-5KW-HBI, by section.
| Specification | Value |
|---|---|
| Power & output | |
| Nominal power | 5 kW |
| Maximum power | 5 kW |
| Apparent power | 5 kVA |
| Phases | 1 |
| Efficiency | |
| Max efficiency | 97.6% |
| European efficiency | 97.6% |
| CEC-weighted efficiency | 97.6% |
| DC input & MPPT | |
| MPPT trackers | 2 |
| Max input voltage | 500 V |
| MPPT voltage min | 150 V |
| MPPT voltage max | 500 V |
| Max input current | 21.8 A |
| Battery & backup | |
| Battery compatible | Yes |
| Backup capable | Yes |
| Continuous backup | 5 kW |
| Physical | |
| Dimensions (H×W×D) | 513 × 370 × 192 mm |
| Weight | 17 kg |
| IP rating | IP65 |
| Cooling | Natural |
| Operating temperature | -25°C to 60°C |
| Installation requirements | |
| Cable gauge | 4 mm² |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The Tempo AS-5KW-HBI against the closest-power inverters from other brands.
| Specification | Tempo AS-5KW-HBITempo | Energizer FORCE 5.0HSEnergizer | Energizer Force 5.0HT+Energizer |
|---|---|---|---|
| Rated power? | 5 kW | 5 kW | 5 kW |
| Max efficiency? | 97.6% | Not on file | Not on file |
| MPPT trackers? | 2 | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Three-phase |
| Type | Hybrid | Hybrid | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | Not on file | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
Warranty summary
This warranty covers manufacturing defects when installed correctly by a licensed installer. Exclusions include improper installation, modifications, and use in unsuitable environments.
This warranty covers manufacturing defects when installed correctly by a licensed installer. Exclusions include improper installation, modifications, and use in unsuitable environments.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 8 of 8. The official install manual is the authoritative source — always confirm before acting.
F08criticalCall your installerAC side leakage current over
A01warningPV connection type different from setup
A02warningISO check among PV panels/wires and ground is abnormal
A03warningPV current arcing
A04warningCall your installerPV Voltage over
A16warningPV(+) and PV(-) reversed Connection
B01warningCall your installerBattery voltage over or under
C01GwarningGrid lost (islanding)
AKE-5KW-HBI (AS4777-2 2020)
5 kW · 1φ
SP-5KW-HBI (AS4777-2 2020)
5 kW · 1φ
AKE-4.6KW-HBI (AS4777-2 2020)
4.6 kW · 1φ
AS-4.6KW-HBI (AS4777-2 2020)
4.6 kW · 1φ
SP-4.6KW-HBI (AS4777-2 2020)
4.6 kW · 1φ
AKE-5.5KW-HBI (AS4777-2 2020)
5.5 kW · 1φ
Other CEC-approved products from Tempo available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.