Hybrid inverter · Soltaro · CEC approved July 2026
CEC listing: AIO2-INSP-3680 (AS4777-2 2020)
A 3.7 kW single-phase hybrid inverter that is battery-ready.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Every figure on file for the Soltaro AIO2-INSP-3680, by section.
| Specification | Value |
|---|---|
| Efficiency | |
| Max efficiency | 97.5% |
| Physical | |
| Dimensions (H×W×D) | 630 × 540 × 210 mm |
| Weight | 29 kg |
| IP rating | IP65 |
| Installation requirements | |
| Top clearance | 200 mm |
| Side clearance | 200 mm |
| AC breaker | 40 A |
| Cable gauge | 6 mm² |
| Earthing method | TN-S |
| DNSP pre-approval | No |
| Estimated install time | 5 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The Soltaro AIO2-INSP-3680 against the closest-power inverters from other brands.
| Specification | Soltaro AIO2-INSP-3680Soltaro | Energizer FORCE 3.7HSEnergizer | Solplanet ASW3680-SSolplanet |
|---|---|---|---|
| Rated power? | 3.68 kW | 3.68 kW | 3.68 kW |
| Max efficiency? | 97.5% | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Single-phase |
| Type | Hybrid | Hybrid | Solar |
| Battery ready | Yes | Yes | No |
| Warranty | 10 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
The warranty covers manufacturing defects for 10 years. It excludes wear & tear. To make a claim, contact customer service with required documents.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 12 of 12. The official install manual is the authoritative source — always confirm before acting.
01criticalCall your installerBattery undervoltage alarm
02criticalBattery discharge average current overcurrent protection
03criticalCall your installerBattery not-connected alarm
04criticalCall your installerBattery undervoltage stop discharge alarm
05criticalBattery overcurrent hardware protection
13criticalBypass overload protection
14criticalInverter overload protection
20criticalInverter heat sink over temperature protection
26criticalCall your installerInverted AC Output Backfills to Bypass AC Input
06warningCharging overvoltage protection
07warningBus overvoltage hardware protection
21warningFan failure
AIO2-INS-5000 (AS4777-2 2020)
5 kW · 1φ
AIO2-INSP-5000 (AS4777-2 2020)
5 kW · 1φ
AIO2-INSP-6000 (AS4777-2 2020)
6 kW · 1φ
Other CEC-approved products from Soltaro available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.