Solar inverter · SolaX Power · Not listed as CEC approved
CEC listing: X3-MIC-8K-G2 (AS4777-2 2020)
An 8 kW single-phase solar inverter.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Every figure on file for the SolaX Power X3-MIC-8K-G2, by section.
| Specification | Value |
|---|---|
| Power & output | |
| Nominal power | 3 kW |
| Efficiency | |
| Max efficiency | 98.3% |
| European efficiency | 97.8% |
| DC input & MPPT | |
| MPPT trackers | 2 |
| Physical | |
| Dimensions (H×W×D) | 434 × 342 × 156 mm |
| Weight | 15.5 kg |
| IP rating | IP66 |
| Installation requirements | |
| Top clearance | 300 mm |
| Side clearance | 300 mm |
| AC breaker | 20 A |
| Cable gauge | 4 mm² |
| Earthing method | TN-S |
| DNSP pre-approval | No |
| Estimated install time | 10 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The SolaX Power X3-MIC-8K-G2 against the closest-power inverters from other brands.
| Specification | SolaX Power X3-MIC-8K-G2SolaX Power | Energizer Force 8.0HS+Energizer | Energizer Force 8.0HT+Energizer |
|---|---|---|---|
| Rated power? | 8 kW | 8 kW | 8 kW |
| Max efficiency? | 98.3% | Not on file | Not on file |
| MPPT trackers? | 2 | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Three-phase |
| Type | Solar | Hybrid | Hybrid |
| Battery ready | No | Yes | Yes |
| Warranty | 10 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
This warranty covers defects in material and workmanship for 10 years, with no coverage if tampered. Register your claim at https://www.solaxcloud.com/#/warranty.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 29 of 29. The official install manual is the authoritative source — always confirm before acting.
Arc FaultcriticalCall your installerArc Fault
ArcSelfTestFaultcriticalCall your installerArc Self-check Fault
DcInjOcpcriticalCall your installerDCI Overcurrent Protection Fault
GridFreqFaultcriticalCall your installerGrid Frequency Out of Range
GridLostFaultcriticalCall your installerGrid Lost Fault
GridRelayFaultcriticalCall your installerRelay Fault
GridVolt10MFaultcriticalCall your installerGrid Overvoltage for Ten Minutes Fault
GridVoltFaultcriticalCall your installerGrid Voltage Out of Range
HardLimitFaultcriticalCall your installerHard Limit Fault
IsoFaultcriticalCall your installerIsolation Fault
Meter FaultcriticalCall your installerMeter Fault
Mgr EEPROM FaultcriticalCall your installerARM EEPROM Fault
OtherDeviceFaultcriticalCall your installerModel Incorrectly Set Fault
OverTempFaultcriticalCall your installerOver Temperature Fault
PvVoltFaultcriticalCall your installerPV Voltage Fault
TzFaultcriticalCall your installerOver Current Fault
AcTerminalOTPwarningCall your installerAC Terminal Overtemperature Fault
BusVoltFaultwarningCall your installerDC Bus Voltage Out of Normal Range
EepromFaultwarningCall your installerDSP EEPROM Fault
InternalComFaultwarningCall your installerInternal Communication Fault
LowTempFaultwarningCall your installerLow Temperature Fault
PowerTypeFaultwarningCall your installerPower Type Fault
PvConnDirFaultwarningCall your installerPV Direction Fault
RcDeviceFaultwarningCall your installerResidual Current Device Fault
ResidualOCPwarningCall your installerOvercurrent Protection Fault
SW OCP FaultwarningCall your installerSoftware Overcurrent Protection Fault
Fan1 WarninginfoCall your installerExternal Fan 1 Abnormal Warning
Fan2 WarninginfoCall your installerExternal Fan 2 Abnormal Warning
FanFaultinfoCall your installerFan Fault
X1-IES-8K (AS4777-2 2020)
8 kW · 1φ
X1-SMT-8K-G2 (AS4777-2 2020)
8 kW · 1φ
X3-PRO-8K-G2 (AS4777-2 2020)
8 kW · 1φ
X1-8.0-T-N (AS4777-2 2020)
8 kW · 1φ
X1-VAST-8K (AS4777-2 2020)
8 kW · 1φ
X3-Hybrid-8.0-D (AS4777-2 2020)
8 kW · 1φ
Other CEC-approved products from SolaX Power available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.