Solar inverter · SolaX Power · CEC approved April 2024
CEC listing: X1-SMT-7K-G2 (AS4777-2 2020)
A 7 kW single-phase solar inverter.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Every figure on file for the SolaX Power X1-SMT-7K-G2, by section.
| Specification | Value |
|---|---|
| Power & output | |
| Nominal power | 5 kW |
| Efficiency | |
| Max efficiency | 98.2% |
| European efficiency | 97.5% |
| Physical | |
| Dimensions (H×W×D) | 370 × 515 × 170 mm |
| Weight | 19.5 kg |
| IP rating | IP66 |
| Installation requirements | |
| AC breaker | 63 A |
| Cable gauge | 10 mm² |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The SolaX Power X1-SMT-7K-G2 against the closest-power inverters from other brands.
| Specification | SolaX Power X1-SMT-7K-G2SolaX Power | Energizer Force 7.0HS+Energizer | Energizer Force 7.0SEnergizer |
|---|---|---|---|
| Rated power? | 7 kW | 7 kW | 7 kW |
| Max efficiency? | 98.2% | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Single-phase |
| Type | Solar | Hybrid | Solar |
| Battery ready | No | Yes | No |
| Warranty | 5 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
This warranty covers the inverter against defects in materials and workmanship for five years. Claims can be made by contacting customer support; however, the warranty does not cover damage from improper installation or environmental factors.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 8 of 8. The official install manual is the authoritative source — always confirm before acting.
IE: 0201criticalCall your installerGrid Lost Fault
IE: 0501criticalCall your installerPV Voltage Fault
IE: 0601criticalCall your installerDC Bus Voltage Out of Normal Range
IE: 1601criticalCall your installerEarth Fault
IE: 0101warningCall your installerOver Current Fault
IE: 0301warningCall your installerGrid Voltage Out of Range
IE: 0401warningCall your installerGrid Frequency Out of Range
IE: 2201warningCall your installerArc Fault
X1-7.0-T-N (AS4777-2 2020)
7 kW · 1φ
X1-Hybrid-7.5-D (AS4777-2 2020)
7.5 kW · 1φ
X1-Hybrid-7.5-M (AS4777-2 2020)
7.5 kW · 1φ
X1-BOOST-6K-G4 (AS4777-2 2020)
6 kW · 1φ
X1-Hybrid-6.0-D (AS4777-2 2020)
6 kW · 1φ
X1-Hybrid-6.0-M (AS4777-2 2020)
6 kW · 1φ
Other CEC-approved products from SolaX Power available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.