Solar inverter · SolaX Power · CEC approved April 2026
CEC listing: X1-BOOST-3.6K-G4 (AS4777-2 2020)
A 3.7 kW single-phase solar inverter.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us
Every figure on file for the SolaX Power X1-BOOST-3.6K-G4, by section.
| Specification | Value |
|---|---|
| Physical | |
| IP rating | IP66 |
| Installation requirements | |
| Top clearance | 300 mm |
| Side clearance | 300 mm |
| AC breaker | 20 A |
| Cable gauge | 4 mm² |
| Earthing method | TN-S |
| DNSP pre-approval | No |
| Estimated install time | 3 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The SolaX Power X1-BOOST-3.6K-G4 against the closest-power inverters from other brands.
| Specification | SolaX Power X1-BOOST-3.6K-G4SolaX Power | Energizer FORCE 3.7HSEnergizer | Solplanet ASW3680-SSolplanet |
|---|---|---|---|
| Rated power? | 3.68 kW | 3.68 kW | 3.68 kW |
| Max efficiency? | Not on file | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Single-phase |
| Type | Solar | Hybrid | Solar |
| Battery ready | No | Yes | No |
| Warranty | 10 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
This warranty covers defects in materials and workmanship for 10 years, excluding issues caused by poor installation or modifications. To make a claim, contact customer support.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 10 of 10. The official install manual is the authoritative source — always confirm before acting.
IE:00020criticalCall your installerIsolation Fault
IE:00021criticalCall your installerOver Temperature Fault
IE:00055criticalCall your installerEarth Fault
IE:00001warningOver Current Fault
IE:00002warningGrid Lost Fault
IE:00003warningGrid Voltage Out of Range
IE:00006warningGrid Frequency Out of Range
IE:00009warningPV Voltage Fault
IE:00010warningDC Bus Voltage Out of Normal Range
IE:00012warningGrid Overvoltage for Ten Minutes Fault
X1-3.6K-S-N(L) (AS4777-2 2020)
3.68 kW · 1φ
X1-Hybrid-3.7-D (AS4777-2 2020)
3.68 kW · 1φ
X1-Hybrid-3.7-M (AS4777-2 2020)
3.68 kW · 1φ
X1-Hybrid-3.7-N-I (AS4777-2 2020)
3.68 kW · 1φ
X1-IES-3.7K (AS4777-2 2020)
3.68 kW · 1φ
X1-3.6-T-D(L) (AS4777-2 2020)
3.68 kW · 1φ
Other CEC-approved products from SolaX Power available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.