Loading Solar Battery Perth...
Loading Solar Battery Perth...
Hybrid inverter · Ambrion · HS2 series · CEC approved October 2023
CEC listing: HS2-3K-S2-1 4G (AS4777-2 2020)
A 3 kW single-phase hybrid inverter that is battery-ready.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Rated power
How much solar it can turn into usable power at once
Max efficiency
How much of the solar you make reaches the house
Phases
Runs on a standard single-phase supply
Type
Runs solar and a battery from one unit
Warranty
How long SOLAR BOS PTY LTD stands behind it
Every figure on file for the Ambrion HS2-3K-S2-1 4G, by section.
| Specification | Value |
|---|---|
| Efficiency | |
| Max efficiency | 97.6% |
| Physical | |
| IP rating | IP65 |
| Operating temperature | 45°C to 60°C |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Battery compatible
Yes
Backup capable
Yes
CEC approved
30 Oct 2023
Approval expiry
30 Apr 2027
Status
Active
Eligible for rebates
Yes
Years in AU Market
4 years
Australian Office
Not verified
CEC-Approved Batteries
60
CEC-Approved Panels
0
Category
Mid-Tier
Typical installed, inverter only
$1,050–$1,800
Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.
Compare quotes from installers you choose
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The Ambrion HS2-3K-S2-1 4G against the closest-power inverters from other brands.
| Specification | Ambrion HS2-3K-S2-1 4GAmbrion | Energizer FORCE 3.0HSEnergizer | Energizer Force 3SEnergizer |
|---|---|---|---|
| Rated power? | 3 kW | 3 kW | 3 kW |
| Max efficiency? | 97.6%best value | 0.0% | 0.0% |
| MPPT trackers? | Not verified | Not verified | Not verified |
| Phases | Single-phase | Single-phase | Single-phase |
| Type | Hybrid | Hybrid | Solar |
| Battery ready | Yes | Yes | No |
| Warranty | 5 years | Not verified | Not verified |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
This warranty covers defects in material and workmanship for a period of five years. Exclusions include damages from non-accredited installations, modifications, and exposure to extreme environments.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
Part of the Ambrion HS2 series
Compare every Ambrion HS2 variant side by side →
AS1-3KS-10.2 (AS4777-2 2020)
3 kW · 1φ
AS1-3KS-15.3 (AS4777-2 2020)
3 kW · 1φ
AS1-3KS-20.4 (AS4777-2 2020)
3 kW · 1φ
AS1-3KS-5.1 (AS4777-2 2020)
3 kW · 1φ
AS3-10K-T-W-P10-AUS (AS4777-2 2020)
10 kW · 3φ
AS3-10K-T-W-P2-AUS (AS4777-2 2020)
10 kW · 3φ
Other CEC-approved products from SOLAR BOS PTY LTD available in Australia.
AS3-10K-T-W-P10-AUS (AS4777-2 2020)
50 kWh · LFP
AS3-10K-T-W-P2-AUS (AS4777-2 2020)
10 kWh · LFP
AS3-10K-T-W-P4-AUS (AS4777-2 2020)
20 kWh · LFP
AS3-10K-T-W-P6-AUS (AS4777-2 2020)
30 kWh · LFP
AS3-10K-T-W-P8-AUS (AS4777-2 2020)
40 kWh · LFP
AS3-12K-T-W-P10-AUS (AS4777-2 2020)
50 kWh · LFP
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.