Hybrid inverter · Mango Power · CEC approved February 2026
CEC listing: M Hybrid Inverter 6kW (AS4777-2 2020)
A 6 kW single-phase hybrid inverter that is battery-ready.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us
Every figure on file for the Mango Power M Hybrid Inverter 6kW, by section.
| Specification | Value |
|---|---|
| Installation requirements | |
| Top clearance | 200 mm |
| Side clearance | 20 mm |
| AC breaker | 50 A |
| Cable gauge | 10 mm² |
| Earthing method | TN-S |
| DNSP pre-approval | Yes |
| Estimated install time | 6 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The Mango Power M Hybrid Inverter 6kW against the closest-power inverters from other brands.
| Specification | Mango Power M Hybrid Inverter 6kWMango Power | Energizer FORCE 6.0HSEnergizer | Energizer Force 6.0HT+Energizer |
|---|---|---|---|
| Rated power? | 6 kW | 6 kW | 6 kW |
| Max efficiency? | Not on file | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Three-phase |
| Type | Hybrid | Hybrid | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | 10 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
Mango Power offers a 10-year warranty covering quality defects and capacity retention (minimum 70%). Misuse voids the warranty. Claims can be made via RMA.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 18 of 18. The official install manual is the authoritative source — always confirm before acting.
01criticalCall your installerOver temperature of inverter module
02criticalCall your installerOver temperature of DCDC module
03criticalCall your installerBattery voltage is too high
04criticalCall your installerOver temperature of PV module
05criticalCall your installerOutput short circuited.
06criticalCall your installerOutput voltage is too high.
07criticalCall your installerOverload time out
08criticalCall your installerBus voltage is too high
09criticalCall your installerBus soft start failed
15criticalCall your installerInverter failed (Self-checking)
16criticalCall your installerOver DC voltage in AC output
23criticalCall your installerInverter negative power
10warningCall your installerPV over current
11warningCall your installerPV over voltage
12warningCall your installerDCDC over current
13warningCall your installerOver current or surge
14warningCall your installerBus voltage is too low
22warningCall your installerOutput voltage is too low
Other CEC-approved products from Mango Power available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.