Solar inverter · Bluetti · CEC approved April 2024
CEC listing: EP760 (AS4777-2 2020)
A 7.6 kW single-phase solar inverter that is listed for battery storage on Synergy's list.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Every figure on file for the Bluetti EP760, by section.
| Specification | Value |
|---|---|
| Power & output | |
| Nominal power | 7.6 kW |
| Maximum power | 7.6 kW |
| Apparent power | 7.6 kVA |
| Efficiency | |
| Max efficiency | 96% |
| European efficiency | 94.5% |
| CEC-weighted efficiency | 96% |
| DC input & MPPT | |
| MPPT trackers | 3 |
| Max input voltage | 550 V |
| MPPT voltage min | 150 V |
| MPPT voltage max | 500 V |
| Max input current | 50 A |
| Battery & backup | |
| Battery compatible | Yes |
| Backup capable | Yes |
| Continuous backup | 5 kW |
| Physical | |
| Dimensions (H×W×D) | 370 × 325 × 636 mm |
| Weight | 46 kg |
| IP rating | IP65 |
| Cooling | Forced air cooling |
| Operating temperature | -20°C to 50°C |
| Rebate eligibility | |
| Listed for battery storage on Synergy's list | Yes |
| Installation requirements | |
| Top clearance | 300 mm |
| Side clearance | 200 mm |
| AC breaker | 40 A |
| Cable gauge | 10 mm² |
| Earthing method | TN-S |
| DNSP pre-approval | Yes |
| Estimated install time | 8 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Listed for battery storage on Synergy's list. Synergy's Supported Solutions List covers inverters approved for control. A battery system needs an inverter with a battery-storage (DER-Storage) listing on this list to be eligible for the WA Battery Scheme. A listing for generation only doesn't count. Other scheme conditions apply.Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
Website
www.bluettipower.com.auThe Bluetti EP760 against the closest-power inverters from other brands.
| Specification | Bluetti EP760Bluetti | Altenergy Power System ELS-7.6Altenergy Power System | |
|---|---|---|---|
| Rated power? | 7.6 kW | 7.6 kW | 7.6 kW |
| Max efficiency? | 96.0% | Not on file | Not on file |
| MPPT trackers? | 3 | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Single-phase |
| Type | Solar | Battery | Hybrid |
| Battery ready | No | Yes | Yes |
| Warranty | 10 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
BLUETTI offers a 10-year warranty covering defects for the EnergyPro 13K. Not covered: improper installation and environmental damage. Claims can be made by contacting customer support.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
Other CEC-approved products from Bluetti available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.