Loading Solar Battery Perth...
Loading Solar Battery Perth...
Hybrid inverter · Swatten · H1 Series series · CEC approved November 2024
CEC listing: SiH-5kW-TH (AS4777-2 2020)
A 5 kW three-phase hybrid inverter that is battery-ready.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Rated power
How much solar it can turn into usable power at once
Phases
Needs a three-phase supply — check your switchboard
Type
Runs solar and a battery from one unit
Warranty
How long Shanghai Sieyuan Watten Technology Co Ltd stands behind it
Every figure on file for the Swatten SiH-5kW-TH, by section.
| Specification | Value |
|---|---|
| Physical | |
| IP rating | IP66 |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Battery compatible
Yes
Backup capable
Yes
CEC approved
21 Nov 2024
Approval expiry
21 Nov 2027
Status
Active
Eligible for rebates
Yes
Years in AU Market
2 years
Australian Office
Not verified
CEC-Approved Batteries
15
CEC-Approved Panels
0
Category
Budget
Typical installed, inverter only
$1,750–$3,000
Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.
Compare quotes from installers you choose
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The Swatten SiH-5kW-TH against the closest-power inverters from other brands.
| Specification | Swatten SiH-5kW-THSwatten | Energizer FORCE 5.0HSEnergizer | Energizer Force 5.0HT+Energizer |
|---|---|---|---|
| Rated power? | 5 kW | 5 kW | 5 kW |
| Max efficiency? | 0.0% | 0.0% | 0.0% |
| MPPT trackers? | Not verified | Not verified | Not verified |
| Phases | Three-phase | Single-phase | Three-phase |
| Type | Hybrid | Hybrid | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | 5 years | Not verified | Not verified |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
The warranty covers defects in materials and workmanship for 5 years. It does not cover damage from improper installation or modifications, and claims can be filed through the manufacturer's customer service.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
Part of the Swatten H1 Series series
Compare every Swatten H1 Series variant side by side →
SiH-10kW-SH (AS4777-2 2020)
9.999 kW · 1φ
SiH-10kW-TH (AS4777-2 2020)
10 kW · 3φ
SiH-10kW-TH-PRO (AS4777-2 2020)
10 kW · 3φ
SiH-12kW-TH (AS4777-2 2020)
12 kW · 3φ
SiH-14.9kW-TH (AS4777-2 2020)
14.999 kW · 3φ
SiH-15kW-TH (AS4777-2 2020)
15 kW · 3φ
Other CEC-approved products from Shanghai Sieyuan Watten Technology Co Ltd available in Australia.
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.