Battery inverter · Selectronic · CEC approved September 2025
CEC listing: SPLC1202 (AS4777-2 2020)
A 20 kW single-phase battery inverter.
The Selectronic SP PRO is a hybrid and off-grid inverter, designed and made in Melbourne. It can run a property with no grid connection at all, or give backup where the power has to stay on.
Managed AC coupling lets the SP PRO work alongside any grid-connect solar inverter. AC coupling has its own rules in WA; the installer can explain them for an existing system.
In Perth and regional WA, the SP PRO suits a property that needs true off-grid capability or backup for loads that must stay on.
The numbers that matter for a home. The full datasheet is below.
Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us
Every figure on file for the Selectronic SPLC1202, by section.
| Specification | Value |
|---|---|
| Physical | |
| IP rating | IP43 |
| Operating temperature | -10°C to 60°C |
| Installation requirements | |
| Cable gauge | 6 mm² |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Australian office
Has local presence
Website
www.selectronic.com.auThe Selectronic SPLC1202 against the closest-power inverters from other brands.
| Specification | Selectronic SPLC1202Selectronic | Afore AF20K-THAfore | Solplanet ASW020K-THSolplanet |
|---|---|---|---|
| Rated power? | 20 kW | 20 kW | 20 kW |
| Max efficiency? | Not on file | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Single-phase | Three-phase | Three-phase |
| Type | Battery | Hybrid | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | 10 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
This warranty covers defects in materials and workmanship for up to 10 years. To make a claim, contact Selectronic with proof of purchase. Common exclusions include improper installation and modifications.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
SPLC1202 (AS4777-2 2020)
20 kW · 1φ
SPLC1200 (AS4777-2 2020)
15 kW · 1φ
SPLC1200 (AS4777-2 2020)
15 kW · 1φ
SPMC482-AU (AS4777-2 2020)
7.5 kW · 1φ
SPMC1201
7.5 kW · 1φ
SPMC482-AU (AS4777-2 2020)
7.5 kW · 1φ
Other CEC-approved products from Selectronic available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.