Loading Solar Battery Perth...
Loading Solar Battery Perth...
Battery inverter · PotisEdge · Power Conversion System series · CEC approved March 2025
CEC listing: PotisPCS-105K-1000/400E-A02E (AS4777-2 2020)
A 105 kW three-phase battery inverter.
Commercial-scale inverter
At 105 kW, this is built for businesses and large sites. A typical home inverter is 5–10 kW.
Browse home-size inverters →Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Rated power
How much solar it can turn into usable power at once
Max efficiency
How much of the solar you make reaches the house
Phases
Needs a three-phase supply — check your switchboard
MPPT trackers
One string of panels, tuned as a whole
Type
Runs a battery; pairs with a separate solar inverter
Warranty
How long iPotisEdge Co Ltd stands behind it
Every figure on file for the PotisEdge PotisPCS-105K-1000/400E-A02E, by section.
| Specification | Value |
|---|---|
| Power & output | |
| Nominal power | 105 kW |
| Maximum power | 115 kW |
| Apparent power | 167 kVA |
| Phases | 3 |
| Efficiency | |
| Max efficiency | 98.2% |
| European efficiency | 98.2% |
| CEC-weighted efficiency | 98.2% |
| DC input & MPPT | |
| MPPT trackers | 1 |
| Max input voltage | 950 V |
| MPPT voltage min | 615 V |
| MPPT voltage max | 950 V |
| Max input current | 171 A |
| Battery & backup | |
| Battery compatible | Yes |
| Backup capable | Yes |
| Continuous backup | 105 kW |
| Physical | |
| Dimensions (H×W×D) | 234 × 484 × 590 mm |
| Weight | 50 kg |
| IP rating | IP20 |
| Cooling | Intelligent air cooling |
| Operating temperature | -30°C to 55°C |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Battery compatible
Yes
Backup capable
Yes
CEC approved
3 Mar 2025
Approval expiry
3 Mar 2028
Status
Active
Eligible for rebates
Yes
Years in AU Market
2 years
Australian Office
Not verified
CEC-Approved Batteries
16
CEC-Approved Panels
0
Category
Budget
Typical installed, inverter only
$31,500–$57,750
Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.
Compare quotes from installers you choose
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.
The PotisEdge PotisPCS-105K-1000/400E-A02E against the closest-power inverters from other brands.
| Specification | Pixii PCM105-AMPixii | ||
|---|---|---|---|
| Rated power? | 105 kW | 105 kW | 105 kW |
| Max efficiency? | 98.2%best value | 0.0% | 0.0% |
| MPPT trackers? | 1 | Not verified | Not verified |
| Phases | Three-phase | Three-phase | Three-phase |
| Type | Battery | Battery | Battery |
| Battery ready | Yes | Yes | Yes |
| Warranty | 5 years | Not verified | Not verified |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
The iPotisEdge Power Conversion System comes with a 5-year warranty covering defects in material and workmanship. Exclusions include modifications, improper installation, and failure to follow safety regulations; to make a claim, provide the original purchase receipt, model number, and a description of the defect.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
Part of the PotisEdge Power Conversion System series
Compare every PotisEdge Power Conversion System variant side by side →
IPS-4.6K-L120-S (AS4777-2 2020)
4.6 kW · 1φ
IPS-4.6K-L60-S (AS4777-2 2020)
4.6 kW · 1φ
IPS-5K-L120-S (AS4777-2 2020)
5 kW · 1φ
IPS-5K-L60-S (AS4777-2 2020)
5 kW · 1φ
IPS-6K-L120-S (AS4777-2 2020)
6 kW · 1φ
IPS-6K-L60-S (AS4777-2 2020)
6 kW · 1φ
Other CEC-approved products from iPotisEdge Co Ltd available in Australia.
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.