Hybrid inverter · RoyPow · CEC approved September 2025

RoyPow SUN8000T-E/I

CEC listing: SUN8000T-E/I (AS4777-2 2020)

An 8 kW three-phase hybrid inverter that is battery-ready.

Rated power: 8kWHow much solar it can run at once
Battery-ready: YesHybrid: a battery plugs straight in, no second box

SUN8000T-E/I: the short answer

Feed-in credits (DEBS)DEBS pays for exports only when the inverter is 5 kW or less: NoDEBS pays for exports only when the inverter is 5 kW or less

What we can tell you

Read from the figures on this page. No review written yet.

It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
It needs a three-phase supply, so check your switchboard or ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.
We hold no captured datasheet for this model yet, so the specs below come from the CEC register only.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power: 8kW; How much solar it can turn into usable power at once
Max efficiency: 87.0%; How much of the solar you make reaches the house
Phases: 3-phase; Needs a three-phase supply, so check your switchboard
Type: Hybrid; Runs solar and a battery from one unit
Warranty: 10yr; How long Huizhou RoyPow Technology Co Ltd stands behind it

Full datasheet

Every figure on file for the RoyPow SUN8000T-E/I, by section.

Full datasheet, by section
Specification	Value
Efficiency
Max efficiency	87%
Physical
Dimensions (H×W×D)	165 × 86 × 260 mm
Weight	2.4 kg
IP rating	IP21
Installation requirements
Top clearance	300 mm
Side clearance	300 mm
AC breaker	63 A
Cable gauge	4 mm²
Earthing method	TN-S
DNSP pre-approval	No
Estimated install time	8 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features and CEC approval

Battery compatible: Yes
Backup capable: Yes
CEC approved: 16 Sept 2025
Approval expiry: 16 Sept 2028
Status: Active
Listed for STCs: Yes

About RoyPow

Years in the Australian market: 1 years
Australian office: Not verified
Category: Budget
CEC-approved inverters: 9
CEC-approved batteries: 20

View full profile →

Explore your options

Compare quotes from installers you choose

WA compliance

ESM compliant: Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 34.0 kWh
Annual yield: 12,410 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

1 years in Australian market

How it compares

The RoyPow SUN8000T-E/I against the closest-power inverters from other brands.

Specification	RoyPow SUN8000T-E/IRoyPow	Energizer Force 8.0HS+Energizer	Energizer Force 8.0HT+Energizer

Rated power?	8 kW	8 kW	8 kW
Max efficiency?	87.0%	Not on file	Not on file
MPPT trackers?	Not on file	Not on file	Not on file

Phases	Three-phase	Single-phase	Three-phase
Type	Hybrid	Hybrid	Hybrid
Battery ready	Yes	Yes	Yes
Warranty	10 years	Not on file	Not on file

Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.

Documents

10-year inverter warranty

RoyPow SUN8000T-E/I

The warranty lasts for 10 years covering full replacement. It does not transfer to new owners. For claims, refer to the warranty document.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Does not transfer with the home
What voids it: non-accredited installation, modification, tampering

Read the official warranty document (PDF)

Fault & error codes — RoyPow SUN8000T-E/I

From the install manual

9 documented

Showing 9 of 9. The official install manual is the authoritative source — always confirm before acting.

1criticalCall your installer
Manual (PDF)
Grid quick test Fail
Likely cause
The L1/L2/L3 voltage peak is greater than 426.0382V, or the R/S/T voltage instantaneous value is greater than 405V.
What to do
Check the grid voltage and ensure it's within the allowable range. Contact the local power operator if not.
11criticalCall your installer
Manual (PDF)
Bus Short-circuit Fail
Likely cause
Bus+ or Bus- voltage is significantly reduced, indicating a serious failure.
What to do
Contact after-sales service for maintenance immediately.
12criticalCall your installer
Manual (PDF)
Bus Rapid LowVolt
Likely cause
Bus voltage is continuously below threshold levels.
What to do
Turn off the inverter, wait, then restart. Contact support if unresolved.
2criticalCall your installer
Manual (PDF)
Grid volt. 10-min average
Likely cause
The ten-minute average value of the effective value of the L1/L2/L3 voltage is above safety standards.
What to do
Check the grid voltage average. Contact the local power operator if necessary.
3criticalCall your installer
Manual (PDF)
Grid L1/L2/L3 OV level1
Likely cause
Effective value of the L1/L2/L3 voltage exceeds the overvoltage protection value.
What to do
Verify the grid connection and ensure all connections are proper.
4criticalCall your installer
Manual (PDF)
Grid L1/L2/L3 UV level1
Likely cause
The RMS of the L1/L2/L3 voltage is less than the undervoltage protection value.
What to do
Check the grid voltage levels. Contact the power provider if necessary.
46criticalCall your installer
Manual (PDF)
Mppt1/MPPT2 hardware OC shutdown
Likely cause
Hardware over current fault occurs continuously for 300ms.
What to do
Turn off the inverter, wait, then restart. Contact support if unresolved.
5criticalCall your installer
Manual (PDF)
Grid OverFreq level1
Likely cause
Grid frequency is exceeding the over-frequency protection thresholds.
What to do
Monitor grid frequency and check for abnormalities.
6criticalCall your installer
Manual (PDF)
Grid UnderFreq level1
Likely cause
Grid frequency is falling below the under-frequency protection thresholds.
What to do
Measure grid frequency and ensure proper operation.

More Huizhou RoyPow Technology Co Ltd inverters

SUN10000T-E/I (AS4777-2 2020)

10 kW · 3φ

SUN12000T-E/I (AS4777-2 2020)

12 kW · 3φ

SUN15000T-E/I (AS4777-2 2020)

15 kW · 3φ

SUN5000S-E/I (AS4777-2 2020)

5 kW · 1φ

SUN4600S-E/I (AS4777-2 2020)

4.6 kW · 1φ

SUN4000S-E/I (AS4777-2 2020)

4 kW · 1φ

View all Huizhou RoyPow Technology Co Ltd inverters

More from RoyPow

Other CEC-approved products from RoyPow available in Australia.

RoyPow Batteries

2*RBmax3.8MH

7.06 kWh · LFP

2*RBmax5.1L

9.58 kWh · LFP

2*RBmax5.1L2

9.58 kWh · LFP

2*RBmax5.5MH

10.18 kWh · LFP

3*RBmax3.8MH

10.6 kWh · LFP

3*RBmax5.1L

14.37 kWh · LFP

View all RoyPow batteries

View full RoyPow manufacturer profile

Want to take the next step?

Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Explore your options Compare inverters

Spotted something outdated?

Hybrid inverter · RoyPow · CEC approved September 2025

RoyPow SUN8000T-E/I

CEC listing: SUN8000T-E/I (AS4777-2 2020)

An 8 kW three-phase hybrid inverter that is battery-ready.

Rated power: 8kWHow much solar it can run at once
Battery-ready: YesHybrid: a battery plugs straight in, no second box

SUN8000T-E/I: the short answer

Feed-in credits (DEBS)DEBS pays for exports only when the inverter is 5 kW or less: NoDEBS pays for exports only when the inverter is 5 kW or less

What we can tell you

Read from the figures on this page. No review written yet.

It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
It needs a three-phase supply, so check your switchboard or ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.
We hold no captured datasheet for this model yet, so the specs below come from the CEC register only.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power: 8kW; How much solar it can turn into usable power at once
Max efficiency: 87.0%; How much of the solar you make reaches the house
Phases: 3-phase; Needs a three-phase supply, so check your switchboard
Type: Hybrid; Runs solar and a battery from one unit
Warranty: 10yr; How long Huizhou RoyPow Technology Co Ltd stands behind it

Full datasheet

Every figure on file for the RoyPow SUN8000T-E/I, by section.

Full datasheet, by section
Specification	Value
Efficiency
Max efficiency	87%
Physical
Dimensions (H×W×D)	165 × 86 × 260 mm
Weight	2.4 kg
IP rating	IP21
Installation requirements
Top clearance	300 mm
Side clearance	300 mm
AC breaker	63 A
Cable gauge	4 mm²
Earthing method	TN-S
DNSP pre-approval	No
Estimated install time	8 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features and CEC approval

Battery compatible: Yes
Backup capable: Yes
CEC approved: 16 Sept 2025
Approval expiry: 16 Sept 2028
Status: Active
Listed for STCs: Yes

About RoyPow

Years in the Australian market: 1 years
Australian office: Not verified
Category: Budget
CEC-approved inverters: 9
CEC-approved batteries: 20

View full profile →

Explore your options

Compare quotes from installers you choose

WA compliance

ESM compliant: Check

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 34.0 kWh
Annual yield: 12,410 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

1 years in Australian market

How it compares

The RoyPow SUN8000T-E/I against the closest-power inverters from other brands.

Specification	RoyPow SUN8000T-E/IRoyPow	Energizer Force 8.0HS+Energizer	Energizer Force 8.0HT+Energizer

Rated power?	8 kW	8 kW	8 kW
Max efficiency?	87.0%	Not on file	Not on file
MPPT trackers?	Not on file	Not on file	Not on file

Phases	Three-phase	Single-phase	Three-phase
Type	Hybrid	Hybrid	Hybrid
Battery ready	Yes	Yes	Yes
Warranty	10 years	Not on file	Not on file

Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.

Documents

10-year inverter warranty

RoyPow SUN8000T-E/I

The warranty lasts for 10 years covering full replacement. It does not transfer to new owners. For claims, refer to the warranty document.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Does not transfer with the home
What voids it: non-accredited installation, modification, tampering

Read the official warranty document (PDF)

Fault & error codes — RoyPow SUN8000T-E/I

From the install manual

9 documented

Showing 9 of 9. The official install manual is the authoritative source — always confirm before acting.

1criticalCall your installer
Manual (PDF)
Grid quick test Fail
Likely cause
The L1/L2/L3 voltage peak is greater than 426.0382V, or the R/S/T voltage instantaneous value is greater than 405V.
What to do
Check the grid voltage and ensure it's within the allowable range. Contact the local power operator if not.
11criticalCall your installer
Manual (PDF)
Bus Short-circuit Fail
Likely cause
Bus+ or Bus- voltage is significantly reduced, indicating a serious failure.
What to do
Contact after-sales service for maintenance immediately.
12criticalCall your installer
Manual (PDF)
Bus Rapid LowVolt
Likely cause
Bus voltage is continuously below threshold levels.
What to do
Turn off the inverter, wait, then restart. Contact support if unresolved.
2criticalCall your installer
Manual (PDF)
Grid volt. 10-min average
Likely cause
The ten-minute average value of the effective value of the L1/L2/L3 voltage is above safety standards.
What to do
Check the grid voltage average. Contact the local power operator if necessary.
3criticalCall your installer
Manual (PDF)
Grid L1/L2/L3 OV level1
Likely cause
Effective value of the L1/L2/L3 voltage exceeds the overvoltage protection value.
What to do
Verify the grid connection and ensure all connections are proper.
4criticalCall your installer
Manual (PDF)
Grid L1/L2/L3 UV level1
Likely cause
The RMS of the L1/L2/L3 voltage is less than the undervoltage protection value.
What to do
Check the grid voltage levels. Contact the power provider if necessary.
46criticalCall your installer
Manual (PDF)
Mppt1/MPPT2 hardware OC shutdown
Likely cause
Hardware over current fault occurs continuously for 300ms.
What to do
Turn off the inverter, wait, then restart. Contact support if unresolved.
5criticalCall your installer
Manual (PDF)
Grid OverFreq level1
Likely cause
Grid frequency is exceeding the over-frequency protection thresholds.
What to do
Monitor grid frequency and check for abnormalities.
6criticalCall your installer
Manual (PDF)
Grid UnderFreq level1
Likely cause
Grid frequency is falling below the under-frequency protection thresholds.
What to do
Measure grid frequency and ensure proper operation.

More Huizhou RoyPow Technology Co Ltd inverters

SUN10000T-E/I (AS4777-2 2020)

10 kW · 3φ

SUN12000T-E/I (AS4777-2 2020)

12 kW · 3φ

SUN15000T-E/I (AS4777-2 2020)

15 kW · 3φ

SUN5000S-E/I (AS4777-2 2020)

5 kW · 1φ

SUN4600S-E/I (AS4777-2 2020)

4.6 kW · 1φ

SUN4000S-E/I (AS4777-2 2020)

4 kW · 1φ

View all Huizhou RoyPow Technology Co Ltd inverters