Solar inverter · Hoymiles · HM series · CEC approval expired
CEC listing: HM-600P (AS4777-2 2020)
A 0.6 kW single-phase solar inverter.
Read from the figures on this page. No review written yet.
The numbers that matter for a home.
Not on file: we don’t have these figures from the manufacturer’s documents yet, so we leave them blank rather than print typical values. Ask your installer to confirm them on the quote. Seen it in a document? Tell us
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
Australian office
Has local presence
Website
www.hoymiles.com/auThe Hoymiles HM-600P against the closest-power inverters from other brands.
| Specification | Hoymiles HM-600PHoymiles | Altenergy Power System DS3-SAltenergy Power System | SolaX Power X1-MINI-0.6K-G4SolaX Power |
|---|---|---|---|
| Rated power? | 0.625 kWhighest | 0.625 kWhighest | 0.6 kW |
| Max efficiency? | Not on file | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Single-phase |
| Type | Solar | Solar | Solar |
| Battery ready | No | No | No |
| Warranty | Not on file | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
HM-600 (AS4777-2 2020)
0.6 kW · 1φ
HMS-600-2T (AS4777-2 2020)
0.6 kW · 1φ
HM-700 (AS4777-2 2020)
0.7 kW · 1φ
HMS-700-2T (AS4777-2 2020)
0.7 kW · 1φ
HM-700P (AS4777-2 2020)
0.714 kW · 1φ
HMS-500-1T (AS4777-2 2020)
0.5 kW · 1φ
Other CEC-approved products from Hoymiles available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.