Hybrid inverter · Fronius · CEC approved July 2026
CEC listing: Primo GEN24 3.0 SC (AS4777-2 2020)
A 3 kW single-phase hybrid inverter that is battery-ready.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us
Every figure on file for the Fronius Primo GEN24 3.0 SC, by section.
| Specification | Value |
|---|---|
| Physical | |
| IP rating | IP66 |
| Installation requirements | |
| Top clearance | 200 mm |
| Side clearance | 200 mm |
| AC breaker | 60 A |
| Cable gauge | 10 mm² |
| Earthing method | TN-S |
| DNSP pre-approval | Yes |
| Estimated install time | 8 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
Australian office
Has local presence
Website
www.fronius.com/en-auThe Fronius Primo GEN24 3.0 SC against the closest-power inverters from other brands.
| Specification | Fronius Primo GEN24 3.0 SCFronius | Energizer FORCE 3.0HSEnergizer | Energizer Force 3SEnergizer |
|---|---|---|---|
| Rated power? | 3 kW | 3 kW | 3 kW |
| Max efficiency? | Not on file | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Single-phase |
| Type | Hybrid | Hybrid | Solar |
| Battery ready | Yes | Yes | No |
| Warranty | 5 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
This warranty covers defects in material and workmanship for 5 years. Normal wear and tear is not covered. To claim, notify your installer or Fronius directly with proof of purchase.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
Primo 3.0-1 (AS4777-2 2020)
3 kW · 1φ
Primo GEN24 3.0 (AS4777-2 2020)
3 kW · 1φ
Primo GEN24 3.0 Plus (AS4777-2 2020)
3 kW · 1φ
Primo GEN24 3.0 Plus SC (AS4777-2 2020)
3 kW · 1φ
Primo 3.5-1 (AS4777-2 2020)
3.5 kW · 1φ
Primo 3.6-1 (AS4777-2 2020)
3.68 kW · 1φ
Other CEC-approved products from Fronius available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.