Loading Solar Battery Perth...
Loading Solar Battery Perth...
Fronius
The Fronius GEN24 Plus is an Austrian-engineered residential hybrid inverter. It runs solar conversion and battery management in one unit and supports both AC-coupled and DC-coupled batteries. Fronius's Active Cooling Technology holds rated output at high ambient temperatures, which matters for Perth summers where passively-cooled inverters derate. The PV Point feature delivers a limited daytime backup outlet from solar alone, without a battery attached. Warranty is 10 years standard, extendable to 15 or 20 years. Fronius runs an Australian office in Melbourne for direct warranty support, and the GEN24 Plus is widely specified by Australian installers in the premium tier.
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Rated Power
9.999 kW
Max Efficiency
—
Phases
Single Phase
Max Input Voltage
—
Min Input Voltage
—
Max Input Current
—
Output Voltage
—
Max Output Current
—
Country of Origin
Unknown
Series
Primo GEN24
Dimensions
0 x 0 x 0 mm
IP Rating
IP65
Operating Temp
-25°C to 60°C
Cooling
Natural
Battery Compatible
Yes
Backup Capable
Yes
ESM Compliant
No
Black Start
No
Grid Forming
No
Export Limiting
No
Remote Monitoring
No
CEC Approved
19 May 2023
Approval Expiry
17 Aug 2026
Status
Active
Eligible for Rebates
Yes
Years in AU Market
17 years
Australian Office
Yes
CEC-Approved Batteries
4
CEC-Approved Panels
0
Category
Premium
$4,025–$6,899
Perth installed price estimate · medium confidence
Prices vary by installer, configuration, and site complexity. Get exact quotes via our installer matching.
From May 1, 2026, all new battery installations in WA require CSIP-AUS compliant inverters. Verify ESM status with your installer.
Perth's high ambient temperatures (regularly 35°C+) can reduce inverter efficiency and trigger thermal throttling. For installations in direct sun or non-ventilated garages, consider inverters with active cooling and wide operating temperature ranges. All grid-connected installations require Western Power approval. Systems above 5kVA require ESM compliance under WA regulations.
Compare this inverter with batteries for a complete system analysis
Based on 5 PSH/day (BOM) with 15% system derate.
Australian office
Has local presence
Website
www.fronius.com/en-auThe Fronius Primo GEN24 10.0 (AS4777-2 2020) against the closest-power inverters from other brands.
| Specification | Aiswei Technology Co Ltd ASW010K-SH (AS4777-2 2020)Aiswei Technology Co Ltd | Aiswei Technology Co Ltd ASW10000-S-A (AS4777-2 2020)Aiswei Technology Co Ltd | |
|---|---|---|---|
| Rated power? | 9.999 kW | 9.999 kW | 9.999 kW |
| Max efficiency? | 0.0% | 0.0% | 0.0% |
| MPPT trackers? | Not verified | Not verified | Not verified |
| Phases | Single-phase | Single-phase | Single-phase |
| Type | Hybrid | Hybrid | Solar |
| Battery ready | Yes | Yes | No |
| Warranty | Not verified | Not verified | Not verified |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
Warranty summary
The Fronius 5 Plus 5 Warranty covers the Fronius GEN24 & GEN24 Plus inverters for 10 years if registered on time. However, it does not cover transport, labor, or materials outside of warranty repairs, and claims must be made through authorized channels.
The Fronius 5 Plus 5 Warranty covers the Fronius GEN24 & GEN24 Plus inverters for 10 years if registered on time. However, it does not cover transport, labor, or materials outside of warranty repairs, and claims must be made through authorized channels.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
Part of the Fronius Primo GEN24 series
Compare every Fronius Primo GEN24 variant side by side →
Eco 25.0-3-S (AS4777-2 2020)
25 kW · 3φ
Eco 27.0-3-S (AS4777-2 2020)
27 kW · 3φ
Primo 3.0-1 (AS4777-2 2020)
3 kW · 1φ
Primo 3.5-1 (AS4777-2 2020)
3.5 kW · 1φ
Primo 3.6-1 (AS4777-2 2020)
3.68 kW · 1φ
Primo 4.0-1 (AS4777-2 2020)
4 kW · 1φ
Other CEC-approved products from Fronius available in Australia.
Compare quotes from SAA-accredited local installers — you choose which to act on. No obligation, no pressure.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.