Loading Solar Battery Perth...
Loading Solar Battery Perth...
Hybrid inverter · ESYsunhome · HM series · CEC approved January 2026
CEC listing: ESYSUNHOME HM10-H (AS4777-2 2020)
A 10 kW three-phase hybrid inverter that is battery-ready.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Rated power
How much solar it can turn into usable power at once
Phases
Needs a three-phase supply — check your switchboard
Type
Runs solar and a battery from one unit
Warranty
How long ESYsunhome Co Ltd stands behind it
Every figure on file for the ESYsunhome ESYSUNHOME HM10-H, by section.
| Specification | Value |
|---|---|
| Installation requirements | |
| Top clearance | 100 mm |
| Side clearance | 50 mm |
| AC breaker | 20 A |
| Cable gauge | 6 mm² |
| Earthing method | TN-S |
| DNSP pre-approval | Yes |
| Estimated install time | 8 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Battery compatible
Yes
Backup capable
Yes
CEC approved
7 Jan 2026
Approval expiry
7 Jan 2029
Status
Active
Eligible for rebates
Yes
Years in AU Market
—
Australian Office
Not verified
CEC-Approved Batteries
8
CEC-Approved Panels
0
Category
Budget
Typical installed, inverter only
$3,500–$5,999
Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.
Compare quotes from installers you choose
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The ESYsunhome ESYSUNHOME HM10-H against the closest-power inverters from other brands.
| Specification | ESYsunhome ESYSUNHOME HM10-HESYsunhome | Solplanet ASW010K-SHSolplanet | Solplanet ASW10000-S-ASolplanet |
|---|---|---|---|
| Rated power? | 9.999 kW | 9.999 kW | 9.999 kW |
| Max efficiency? | 0.0% | 0.0% | 0.0% |
| MPPT trackers? | Not verified | Not verified | Not verified |
| Phases | Three-phase | Single-phase | Single-phase |
| Type | Hybrid | Hybrid | Solar |
| Battery ready | Yes | Yes | No |
| Warranty | 10 years | Not verified | Not verified |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
The warranty covers defects for 10 years, with 80% capacity retention at year 10. Warranty voids include non-accredited installation. Claims can be made via customer support.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
Part of the ESYsunhome HM series
Compare every ESYsunhome HM variant side by side →
ESYSUNHOME HM10 (AS4777-2 2020)
9.9 kW · 1φ
ESYSUNHOME HM12 (AS4777-2 2020)
12 kW · 1φ
ESYSUNHOME HM15 (AS4777-2 2020)
15 kW · 3φ
ESYSUNHOME HM20 (AS4777-2 2020)
20 kW · 3φ
ESYSUNHOME HM5-MAX (AS4777-2 2020)
5 kW · 1φ
Other CEC-approved products from ESYsunhome Co Ltd available in Australia.
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.