Loading Solar Battery Perth...

Hybrid inverter · Energylib New Energy Technology · CEC approved October 2026

Energylib New Energy Technology LIB RHR01L1P9.9-AU

CEC listing: LIB RHR01L1P9.9-AU (AS4777-2 2020)

A 9.9 kW single-phase hybrid inverter that is battery-ready.

Installed in Perth, estimated: ~$4,703Estimate, modelled from its size, Feb 2026 rates
Rated power: 9.9kWHow much solar it can run at once
Battery-ready: YesHybrid: a battery plugs straight in, no second box

Datasheet (PDF)

LIB RHR01L1P9.9-AU: the short answer

Feed-in credits (DEBS)DEBS pays for exports only when the inverter is 5 kW or less: NoDEBS pays for exports only when the inverter is 5 kW or less

What we can tell you

Read from the figures on this page. No review written yet.

It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
It runs on a standard single-phase supply.
We can't confirm it is on Synergy's approved list. A battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power: 9.9kW; How much solar it can turn into usable power at once
Max efficiency: 96.8%; How much of the solar you make reaches the house
Phases: Single; Runs on a standard single-phase supply
Type: Hybrid; Runs solar and a battery from one unit
Warranty: 10yr; How long EnergyLIB (Suzhou) New Energy Technology Co Ltd stands behind it

Full datasheet

Every figure on file for the Energylib New Energy Technology LIB RHR01L1P9.9-AU, by section.

Full datasheet, by section
Specification	Value
Efficiency
Max efficiency	96.8%
Physical
IP rating	IP65
Installation requirements
Top clearance	0 mm
Side clearance	20 mm
AC breaker	25 A
Cable gauge	6 mm²
Earthing method	PE
DNSP pre-approval	Yes
Estimated install time	4 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features and CEC approval

Battery compatible: Yes
Backup capable: Yes
CEC approved: 1 Oct 2026
Approval expiry: 1 Oct 2029
Status: Active
Eligible for rebates: Yes

About Energylib New Energy Technology

Australian office: Not verified
Category: Unknown
CEC-approved inverters: 5

View full profile →

What it costs in Perth

Estimated installed, inverter only

$3,465–$5,940

Estimatemodelled from its sizeFeb 2026 rates

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 42.1 kWh
Annual yield: 15,357 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

0 years in Australian market

How it compares

The Energylib New Energy Technology LIB RHR01L1P9.9-AU against the closest-power inverters from other brands.

Specification	Energylib New Energy Technology LIB RHR01L1P9.9-AUEnergylib New Energy Technology	Energizer Force 9.9HS+Energizer	Energizer Force 9.9HT+Energizer

Rated power?	9.9 kW	9.9 kW	9.9 kW
Max efficiency?	96.8%	Not on file	Not on file
MPPT trackers?	Not on file	Not on file	Not on file

Phases	Single-phase	Single-phase	Three-phase
Type	Hybrid	Hybrid	Hybrid
Battery ready	Yes	Yes	Yes
Warranty	10 years	Not on file	Not on file

Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.

Documents

10-year inverter warranty

Energylib New Energy Technology LIB RHR01L1P9.9-AU

This warranty covers defects for 10 years. Exclusions include improper storage and unqualified installations. Claim by contacting the supplier within 30 days of failure.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Transfers to the next homeowner
What voids it: Improper installation, unauthorized modifications, use of incompatible inverters, damage from natural disasters, and failure to report issues within 30 days.
Environment limits: Storage temperature limits: -20°C to 50°C; Operating temperature: charge: 0~50°C, discharge: -20~50°C.

Read the official warranty document (PDF)

Fault & error codes — Energylib New Energy Technology LIB RHR01L1P9.9-AU

From the install manual

15 documented

Showing 15 of 15. The official install manual is the authoritative source — always confirm before acting.

201criticalCall your installer
Manual (PDF)
Leakage current is excessively high
Likely cause
PV system may have grounding issues or damaged components.
What to do
Restart the inverter. If the error message persists, contact Growatt.
202criticalCall your installer
Manual (PDF)
The DC input voltage exceeds the specified upper threshold.
Likely cause
Too many PV modules in series or defective modules.
What to do
Disconnect the DC switch immediately. Check the voltage of each PV string with a multimeter.
402criticalCall your installer
Manual (PDF)
Output High DCI.
Likely cause
Possible short in the inverter output.
What to do
Restart the inverter. If the problem persists, contact Growatt.
404criticalCall your installer
Manual (PDF)
Bus sample fault.
Likely cause
Component issue within the inverter.
What to do
Restart the inverter. If the problem persists, contact Growatt.
405criticalCall your installer
Manual (PDF)
Relay fault.
Likely cause
Faulty relay component.
What to do
Restart the inverter. If the problem persists, contact Growatt.
407criticalCall your installer
Manual (PDF)
Self-test fails.
Likely cause
Devices inside the inverter may be faulty.
What to do
Restart the inverter. If the error persists, contact Growatt.
408criticalCall your installer
Manual (PDF)
Over-temperature.
Likely cause
Inverter may be overheating due to environmental conditions or insufficient cooling.
What to do
Allow the inverter to cool down and ensure adequate ventilation. Restart the inverter when the temperature lowers.
409criticalCall your installer
Manual (PDF)
Bus over-voltage.
Likely cause
Voltage spikes from the connected grid or PV system.
What to do
Restart the inverter. If the problem persists, contact Growatt.
411criticalCall your installer
Manual (PDF)
Communication between DSP and M3 abnormal.
Likely cause
Faulty communication components within the inverter.
What to do
Restart the inverter. If the problem persists, update the DSP and M3 firmware or replace components as advised.
420criticalCall your installer
Manual (PDF)
GFCI fault.
Likely cause
Ground Fault Circuit Interrupter is detecting an issue.
What to do
Restart the inverter. If the problem persists, contact Growatt.
203warningCall your installer
Manual (PDF)
Insulation problem
Likely cause
Panel enclosure may be improperly grounded or wet.
What to do
Check if the panel enclosure and inverter are grounded properly, and if the DC breaker is wet.
300warningCall your installer
Manual (PDF)
Utility grid voltage is out of permissible range.
Likely cause
Grid voltage fluctuating or unstable.
What to do
Switch off the DC switch and check the AC wiring, especially the neutral and ground wire.
302warningCall your installer
Manual (PDF)
No AC connection.
Likely cause
AC wiring may be faulty or disconnected.
What to do
Check AC wiring and the status of the AC breaker.
303warningCall your installer
Manual (PDF)
The voltage difference between the Neutral and PE is above 30V.
Likely cause
Faulty wiring or grounding issues.
What to do
Check the voltage of Neutral and PE cables and AC wiring.
304warningCall your installer
Manual (PDF)
Utility grid frequency is out of permissible range.
Likely cause
Grid frequency fluctuations.
What to do
Switch off the DC switch and check AC wiring compliance with local grid standards.

More EnergyLIB (Suzhou) New Energy Technology Co Ltd inverters

LIB RHR01L1P10-AU (AS4777-2 2020)

10 kW · 1φ

LIB RHR01L1P08-AU (AS4777-2 2020)

8 kW · 1φ

LIB RHR01L1P06-AU (AS4777-2 2020)

6 kW · 1φ

LIB RHR01L1P05-AU (AS4777-2 2020)

5 kW · 1φ

View all EnergyLIB (Suzhou) New Energy Technology Co Ltd inverters

Want to take the next step?

Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Explore your options Compare inverters

Spotted something outdated?

Hybrid inverter · Energylib New Energy Technology · CEC approved October 2026

Energylib New Energy Technology LIB RHR01L1P9.9-AU

CEC listing: LIB RHR01L1P9.9-AU (AS4777-2 2020)

A 9.9 kW single-phase hybrid inverter that is battery-ready.

Installed in Perth, estimated: ~$4,703Estimate, modelled from its size, Feb 2026 rates
Rated power: 9.9kWHow much solar it can run at once
Battery-ready: YesHybrid: a battery plugs straight in, no second box

Datasheet (PDF)

LIB RHR01L1P9.9-AU: the short answer

Feed-in credits (DEBS)DEBS pays for exports only when the inverter is 5 kW or less: NoDEBS pays for exports only when the inverter is 5 kW or less

What we can tell you

Read from the figures on this page. No review written yet.

It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
It runs on a standard single-phase supply.
We can't confirm it is on Synergy's approved list. A battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power: 9.9kW; How much solar it can turn into usable power at once
Max efficiency: 96.8%; How much of the solar you make reaches the house
Phases: Single; Runs on a standard single-phase supply
Type: Hybrid; Runs solar and a battery from one unit
Warranty: 10yr; How long EnergyLIB (Suzhou) New Energy Technology Co Ltd stands behind it

Full datasheet

Every figure on file for the Energylib New Energy Technology LIB RHR01L1P9.9-AU, by section.

Full datasheet, by section
Specification	Value
Efficiency
Max efficiency	96.8%
Physical
IP rating	IP65
Installation requirements
Top clearance	0 mm
Side clearance	20 mm
AC breaker	25 A
Cable gauge	6 mm²
Earthing method	PE
DNSP pre-approval	Yes
Estimated install time	4 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features and CEC approval

Battery compatible: Yes
Backup capable: Yes
CEC approved: 1 Oct 2026
Approval expiry: 1 Oct 2029
Status: Active
Eligible for rebates: Yes

About Energylib New Energy Technology

Australian office: Not verified
Category: Unknown
CEC-approved inverters: 5

View full profile →

What it costs in Perth

Estimated installed, inverter only

$3,465–$5,940

Estimatemodelled from its sizeFeb 2026 rates

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 42.1 kWh
Annual yield: 15,357 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

0 years in Australian market

How it compares

The Energylib New Energy Technology LIB RHR01L1P9.9-AU against the closest-power inverters from other brands.

Specification	Energylib New Energy Technology LIB RHR01L1P9.9-AUEnergylib New Energy Technology	Energizer Force 9.9HS+Energizer	Energizer Force 9.9HT+Energizer

Rated power?	9.9 kW	9.9 kW	9.9 kW
Max efficiency?	96.8%	Not on file	Not on file
MPPT trackers?	Not on file	Not on file	Not on file

Phases	Single-phase	Single-phase	Three-phase
Type	Hybrid	Hybrid	Hybrid
Battery ready	Yes	Yes	Yes
Warranty	10 years	Not on file	Not on file

Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.

Documents

10-year inverter warranty

Energylib New Energy Technology LIB RHR01L1P9.9-AU

This warranty covers defects for 10 years. Exclusions include improper storage and unqualified installations. Claim by contacting the supplier within 30 days of failure.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Transfers to the next homeowner
What voids it: Improper installation, unauthorized modifications, use of incompatible inverters, damage from natural disasters, and failure to report issues within 30 days.
Environment limits: Storage temperature limits: -20°C to 50°C; Operating temperature: charge: 0~50°C, discharge: -20~50°C.

Read the official warranty document (PDF)

Fault & error codes — Energylib New Energy Technology LIB RHR01L1P9.9-AU

From the install manual

15 documented

Showing 15 of 15. The official install manual is the authoritative source — always confirm before acting.

201criticalCall your installer
Manual (PDF)
Leakage current is excessively high
Likely cause
PV system may have grounding issues or damaged components.
What to do
Restart the inverter. If the error message persists, contact Growatt.
202criticalCall your installer
Manual (PDF)
The DC input voltage exceeds the specified upper threshold.
Likely cause
Too many PV modules in series or defective modules.
What to do
Disconnect the DC switch immediately. Check the voltage of each PV string with a multimeter.
402criticalCall your installer
Manual (PDF)
Output High DCI.
Likely cause
Possible short in the inverter output.
What to do
Restart the inverter. If the problem persists, contact Growatt.
404criticalCall your installer
Manual (PDF)
Bus sample fault.
Likely cause
Component issue within the inverter.
What to do
Restart the inverter. If the problem persists, contact Growatt.
405criticalCall your installer
Manual (PDF)
Relay fault.
Likely cause
Faulty relay component.
What to do
Restart the inverter. If the problem persists, contact Growatt.
407criticalCall your installer
Manual (PDF)
Self-test fails.
Likely cause
Devices inside the inverter may be faulty.
What to do
Restart the inverter. If the error persists, contact Growatt.
408criticalCall your installer
Manual (PDF)
Over-temperature.
Likely cause
Inverter may be overheating due to environmental conditions or insufficient cooling.
What to do
Allow the inverter to cool down and ensure adequate ventilation. Restart the inverter when the temperature lowers.
409criticalCall your installer
Manual (PDF)
Bus over-voltage.
Likely cause
Voltage spikes from the connected grid or PV system.
What to do
Restart the inverter. If the problem persists, contact Growatt.
411criticalCall your installer
Manual (PDF)
Communication between DSP and M3 abnormal.
Likely cause
Faulty communication components within the inverter.
What to do
Restart the inverter. If the problem persists, update the DSP and M3 firmware or replace components as advised.
420criticalCall your installer
Manual (PDF)
GFCI fault.
Likely cause
Ground Fault Circuit Interrupter is detecting an issue.
What to do
Restart the inverter. If the problem persists, contact Growatt.
203warningCall your installer
Manual (PDF)
Insulation problem
Likely cause
Panel enclosure may be improperly grounded or wet.
What to do
Check if the panel enclosure and inverter are grounded properly, and if the DC breaker is wet.
300warningCall your installer
Manual (PDF)
Utility grid voltage is out of permissible range.
Likely cause
Grid voltage fluctuating or unstable.
What to do
Switch off the DC switch and check the AC wiring, especially the neutral and ground wire.
302warningCall your installer
Manual (PDF)
No AC connection.
Likely cause
AC wiring may be faulty or disconnected.
What to do
Check AC wiring and the status of the AC breaker.
303warningCall your installer
Manual (PDF)
The voltage difference between the Neutral and PE is above 30V.
Likely cause
Faulty wiring or grounding issues.
What to do
Check the voltage of Neutral and PE cables and AC wiring.
304warningCall your installer
Manual (PDF)
Utility grid frequency is out of permissible range.
Likely cause
Grid frequency fluctuations.
What to do
Switch off the DC switch and check AC wiring compliance with local grid standards.

More EnergyLIB (Suzhou) New Energy Technology Co Ltd inverters

LIB RHR01L1P10-AU (AS4777-2 2020)

10 kW · 1φ

LIB RHR01L1P08-AU (AS4777-2 2020)

8 kW · 1φ

LIB RHR01L1P06-AU (AS4777-2 2020)

6 kW · 1φ

LIB RHR01L1P05-AU (AS4777-2 2020)

5 kW · 1φ

View all EnergyLIB (Suzhou) New Energy Technology Co Ltd inverters

Want to take the next step?

Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.

About this data

Explore your options Compare inverters

Spotted something outdated?