Hybrid inverter · Empower · CEC approved August 2026
CEC listing: Elektrobank 14 (AS4777-2 2020)
A 5 kW single-phase hybrid inverter that is battery-ready and on Synergy's approved inverter list.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us
Every figure on file for the Empower Elektrobank 14, by section.
| Specification | Value |
|---|---|
| Rebate eligibility | |
| On Synergy's approved inverter list | Yes |
| Installation requirements | |
| Top clearance | 1000 mm |
| Side clearance | 1000 mm |
| AC breaker | 32 A |
| Cable gauge | 10 mm² |
| Earthing method | TN-S |
| DNSP pre-approval | No |
| Estimated install time | 7 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Compare quotes from installers you choose
On Synergy's approved inverter list. Synergy's Supported Solutions List covers inverters approved for battery control. A battery system needs an inverter on this list to be eligible for the WA Battery Scheme. Other scheme conditions apply.Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The Empower Elektrobank 14 against the closest-power inverters from other brands.
| Specification | Empower Elektrobank 14Empower | Energizer FORCE 5.0HSEnergizer | Energizer Force 5.0HT+Energizer |
|---|---|---|---|
| Rated power? | 5 kW | 5 kW | 5 kW |
| Max efficiency? | Not on file | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Three-phase |
| Type | Hybrid | Hybrid | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | 10 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
This warranty lasts 10 years, covering defects if installed correctly. It excludes damage from extreme temperatures. To make a claim, notify Empower Energy with your purchase details.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
Other CEC-approved products from Empower available in Australia.
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.
