Hybrid inverter · EcoFlow · CEC approved September 2026
CEC listing: EF HD-P3-8K0-S2 (AS4777-2 2020)
An 8 kW three-phase hybrid inverter that is battery-ready and on Synergy's approved inverter list.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Every figure on file for the EcoFlow EF HD-P3-8K0-S2, by section.
| Specification | Value |
|---|---|
| Efficiency | |
| Max efficiency | 97.8% |
| Physical | |
| IP rating | IP66 |
| Operating temperature | -30°C to 60°C |
| Rebate eligibility | |
| On Synergy's approved inverter list | Yes |
| Installation requirements | |
| Top clearance | 65 mm |
| Side clearance | 300 mm |
| AC breaker | 63 A |
| Cable gauge | 16 mm² |
| Earthing method | TN-S |
| DNSP pre-approval | Yes |
| Estimated install time | 8 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Compare quotes from installers you choose
On Synergy's approved inverter list. Synergy's Supported Solutions List covers inverters approved for battery control. A battery system needs an inverter on this list to be eligible for the WA Battery Scheme. Other scheme conditions apply.Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
Australian office
Has local presence
Website
www.ecoflow.com/auThe EcoFlow EF HD-P3-8K0-S2 against the closest-power inverters from other brands.
| Specification | EcoFlow EF HD-P3-8K0-S2EcoFlow | Energizer Force 8.0HS+Energizer | Energizer Force 8.0HT+Energizer |
|---|---|---|---|
| Rated power? | 8 kW | 8 kW | 8 kW |
| Max efficiency? | 97.8% | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Three-phase | Single-phase | Three-phase |
| Type | Hybrid | Hybrid | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | 15 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
The EcoFlow Inverter has a 15-year warranty covering defects, excluding damage from misuse. To claim, provide proof of purchase and contact EcoFlow support.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
EF HD-P3-8K0-S1 (AS4777-2 2020)
8 kW · 3φ
EF HD-P3-8K0-S2F (AS4777-2 2020)
8 kW · 3φ
EF HD-P3-6K0-S1 (AS4777-2 2020)
6 kW · 3φ
EF HD-P3-6K0-S2 (AS4777-2 2020)
6 kW · 3φ
EF HD-P3-6K0-S2F (AS4777-2 2020)
6 kW · 3φ
EF HD-P3-10K-S1 (AS4777-2 2020)
10 kW · 3φ
Other CEC-approved products from EcoFlow available in Australia.
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.
