Hybrid inverter · EcoFlow · CEC approved June 2026
CEC listing: EF HD-P1-3K-S1-A (AS4777-2 2020)
A 3 kW single-phase hybrid inverter that is battery-ready and listed for battery storage on Synergy's list.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Every figure on file for the EcoFlow EF HD-P1-3K-S1-A, by section.
| Specification | Value |
|---|---|
| Efficiency | |
| Max efficiency | 96% |
| European efficiency | 95% |
| DC input & MPPT | |
| MPPT trackers | 2 |
| Physical | |
| IP rating | IP65 |
| Rebate eligibility | |
| Listed for battery storage on Synergy's list | Yes |
| Installation requirements | |
| Top clearance | 0 mm |
| Side clearance | 0 mm |
| Earthing method | TN-S, TN-C, TN-C-S, TT |
| DNSP pre-approval | Yes |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Listed for battery storage on Synergy's list. Synergy's Supported Solutions List covers inverters approved for control. A battery system needs an inverter with a battery-storage (DER-Storage) listing on this list to be eligible for the WA Battery Scheme. A listing for generation only doesn't count. Other scheme conditions apply.Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
Australian office
Has local presence
Website
www.ecoflow.com/auThe EcoFlow EF HD-P1-3K-S1-A against the closest-power inverters from other brands.
| Specification | EcoFlow EF HD-P1-3K-S1-AEcoFlow | Energizer FORCE 3.0HSEnergizer | Energizer Force 3SEnergizer |
|---|---|---|---|
| Rated power? | 3 kW | 3 kW | 3 kW |
| Max efficiency? | 96.0% | Not on file | Not on file |
| MPPT trackers? | 2 | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Single-phase |
| Type | Hybrid | Hybrid | Solar |
| Battery ready | Yes | Yes | No |
| Warranty | 15 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
This 15-year warranty covers defects in materials and workmanship. Warranty voided with non-accredited installation or tampering. To claim, contact support via phone or email.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 7 of 7. The official install manual is the authoritative source — always confirm before acting.
E004criticalCall your installerBattery is faulty
E006criticalCall your installerConverter is faulty
E001warningAbnormal electrical connection
E002warningCall your installerAbnormal smart meter communication
E005warningAbnormal battery communication
E003infoAbnormal IoT communication
E007infoAbnormal converter communication
EF HD-P1-5K-S1-A (AS4777-2 2020)
5 kW · 1φ
EF HD-P1-6K-S1-A (AS4777-2 2020)
6 kW · 1φ
EF HD-P1-8K0-S2A (AS4777-2 2020)
8 kW · 1φ
EF HD-P1-9K9-S2A (AS4777-2 2020)
9.999 kW · 1φ
EF HD-P1-12K0-S2A (AS4777-2 2020)
12 kW · 1φ
EF HD-P3-6K0-S1 (AS4777-2 2020)
6 kW · 3φ
Other CEC-approved products from EcoFlow available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.