Loading Solar Battery Perth...
Loading Solar Battery Perth...
Hybrid inverter · Each Energy Technology · PHS-M1A series · CEC approved October 2023
CEC listing: PHS8K-M1A (AS4777-2 2020)
An 8 kW single-phase hybrid inverter that is battery-ready.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Rated power
How much solar it can turn into usable power at once
Max efficiency
How much of the solar you make reaches the house
Phases
Runs on a standard single-phase supply
MPPT trackers
2 roof faces can be tuned independently
Type
Runs solar and a battery from one unit
Warranty
How long Each Energy Technology (Suzhou) Co Ltd stands behind it
Every figure on file for the Each Energy Technology PHS8K-M1A, by section.
| Specification | Value |
|---|---|
| Power & output | |
| Nominal power | 8 kW |
| Maximum power | 8.6 kW |
| Apparent power | 9 kVA |
| Phases | 1 |
| Efficiency | |
| Max efficiency | 98.5% |
| European efficiency | 97% |
| CEC-weighted efficiency | 95% |
| DC input & MPPT | |
| MPPT trackers | 2 |
| Max input voltage | 600 V |
| MPPT voltage min | 100 V |
| MPPT voltage max | 500 V |
| Max input current | 25 A |
| Battery & backup | |
| Battery compatible | Yes |
| Backup capable | Yes |
| Continuous backup | 7 kW |
| Physical | |
| Dimensions (H×W×D) | 335 × 250 × 120 mm |
| Weight | 15 kg |
| IP rating | IP65 |
| Cooling | Fan |
| Operating temperature | -25°C to 60°C |
| Installation requirements | |
| Cable gauge | 16 mm² |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Battery compatible
Yes
Backup capable
Yes
CEC approved
20 Oct 2023
Approval expiry
20 Oct 2026
Status
Active
Eligible for rebates
Yes
Years in AU Market
4 years
Australian Office
Not verified
CEC-Approved Batteries
0
CEC-Approved Panels
0
Category
Budget
Typical installed, inverter only
$2,800–$4,800
Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.
Compare quotes from installers you choose
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The Each Energy Technology PHS8K-M1A against the closest-power inverters from other brands.
| Specification | Each Energy Technology PHS8K-M1AEach Energy Technology | Energizer Force 8.0HS+Energizer | Energizer Force 8.0HT+Energizer |
|---|---|---|---|
| Rated power? | 8 kW | 8 kW | 8 kW |
| Max efficiency? | 98.5%best value | 0.0% | 0.0% |
| MPPT trackers? | 2 | Not verified | Not verified |
| Phases | Single-phase | Single-phase | Three-phase |
| Type | Hybrid | Hybrid | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | 5 years | Not verified | Not verified |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
This warranty covers defects in material, manufacturing, and workmanship for 10 years. Key exclusions include damage from unauthorized modifications and certain environmental conditions. Claiming the warranty requires notifying Each Energy within 30 days of noticing a defect.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 5 of 5. The official install manual is the authoritative source — always confirm before acting.
ISO_OUT_RANGEcriticalCall your installerInsulation Out of Range
PEN_NO_CONNECTcriticalCall your installerN and PE Lines Not Properly Connected
DCI_OUT_RANGEwarningCall your installerDC Component Too Large
GFCI_DEVICE_FAULTwarningCall your installerGround Fault Circuit Interrupt (GFCI) Device Fault
GFCI_OUT_RANGEwarningCall your installerCurrent Leakage Out of Range
Part of the Each Energy Technology PHS-M1A series
Compare every Each Energy Technology PHS-M1A variant side by side →
EES10K-M1 (AS4777-2 2020)
10 kW · 1φ
EES3K-M1 (AS4777-2 2020)
3 kW · 1φ
EES4K-M1 (AS4777-2 2020)
4 kW · 1φ
EES5K-M1 (AS4777-2 2020)
5 kW · 1φ
EES6K-M1 (AS4777-2 2020)
6 kW · 1φ
EES6KPro-M1 (AS4777-2 2020)
6 kW · 1φ
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.