Hybrid inverter · Each Energy · CEC approval expired
CEC listing: PHS5K-M1A (AS4777-2 2020)
A 5 kW single-phase hybrid inverter that is battery-ready.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Every figure on file for the Each Energy PHS5K-M1A, by section.
| Specification | Value |
|---|---|
| Power & output | |
| Nominal power | 5 kW |
| Maximum power | 5.5 kW |
| Apparent power | 6 kVA |
| Phases | 1 |
| Efficiency | |
| Max efficiency | 98% |
| European efficiency | 97% |
| CEC-weighted efficiency | 95% |
| DC input & MPPT | |
| MPPT trackers | 1 |
| Max input voltage | 600 V |
| MPPT voltage min | 80 V |
| MPPT voltage max | 500 V |
| Max input current | 16 A |
| Battery & backup | |
| Battery compatible | Yes |
| Backup capable | Yes |
| Continuous backup | 4.5 kW |
| Physical | |
| Dimensions (H×W×D) | 335 × 250 × 120 mm |
| Weight | 13 kg |
| IP rating | IP65 |
| Cooling | Fan |
| Operating temperature | -25°C to 60°C |
| Installation requirements | |
| Cable gauge | 16 mm² |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The Each Energy PHS5K-M1A against the closest-power inverters from other brands.
| Specification | Each Energy PHS5K-M1AEach Energy | Energizer FORCE 5.0HSEnergizer | Energizer Force 5.0HT+Energizer |
|---|---|---|---|
| Rated power? | 5 kW | 5 kW | 5 kW |
| Max efficiency? | 98.0% | Not on file | Not on file |
| MPPT trackers? | 1 | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Three-phase |
| Type | Hybrid | Hybrid | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | 5 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
This warranty covers defects in material, manufacturing, and workmanship for 10 years. Key exclusions include damage from unauthorized modifications and certain environmental conditions. Claiming the warranty requires notifying Each Energy within 30 days of noticing a defect.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 5 of 5. The official install manual is the authoritative source — always confirm before acting.
ISO_OUT_RANGEcriticalCall your installerInsulation Out of Range
PEN_NO_CONNECTcriticalCall your installerN and PE Lines Not Properly Connected
DCI_OUT_RANGEwarningCall your installerDC Component Too Large
GFCI_DEVICE_FAULTwarningCall your installerGround Fault Circuit Interrupt (GFCI) Device Fault
GFCI_OUT_RANGEwarningCall your installerCurrent Leakage Out of Range
EES5K-M1 (AS4777-2 2020)
5 kW · 1φ
EET5KPro-M1 (AS4777-2 2020)
5 kW · 1φ
EES4K-M1 (AS4777-2 2020)
4 kW · 1φ
PHS4K-M1A (AS4777-2 2020)
4 kW · 1φ
EES6K-M1 (AS4777-2 2020)
6 kW · 1φ
EES6KPro-M1 (AS4777-2 2020)
6 kW · 1φ
Other CEC-approved products from Each Energy available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.