Hybrid inverter · Dyness · CEC approved July 2025
CEC listing: Cygni 10.0HS-M3 (AS4777-2 2020)
A 10 kW single-phase hybrid inverter that is battery-ready and listed for battery storage on Synergy's list.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Every figure on file for the Dyness Cygni 10.0HS-M3, by section.
| Specification | Value |
|---|---|
| Efficiency | |
| Max efficiency | 97.5% |
| European efficiency | 97% |
| Physical | |
| IP rating | IP66 |
| Rebate eligibility | |
| Listed for battery storage on Synergy's list | Yes |
| Installation requirements | |
| Cable gauge | 10 mm² |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Listed for battery storage on Synergy's list. Synergy's Supported Solutions List covers inverters approved for control. A battery system needs an inverter with a battery-storage (DER-Storage) listing on this list to be eligible for the WA Battery Scheme. A listing for generation only doesn't count. Other scheme conditions apply.Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
Website
au.dyness.comThe Dyness Cygni 10.0HS-M3 against the closest-power inverters from other brands.
| Specification | Dyness Cygni 10.0HS-M3Dyness | Solplanet ASW010K-SHSolplanet | Solplanet ASW10000-S-ASolplanet |
|---|---|---|---|
| Rated power? | 9.999 kW | 9.999 kW | 9.999 kW |
| Max efficiency? | 97.5% | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Single-phase |
| Type | Hybrid | Hybrid | Solar |
| Battery ready | Yes | Yes | No |
| Warranty | 10 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
Dyness offers a ten-year limited warranty on its Cygni ESS system, covering defects in materials and workmanship, provided the product is installed per the manual. The warranty excludes damage from unauthorized modifications, improper use, and natural disasters.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
Cygni 10.0HS-M12 (AS4777-2 2020)
9.999 kW · 1φ
Cygni 10.0HS-M2 (AS4777-2 2020)
9.999 kW · 1φ
Cygni 10.0HS-M4 (AS4777-2 2020)
9.999 kW · 1φ
Cygni 10.0HS-M6 (AS4777-2 2020)
9.999 kW · 1φ
Cygni 10.0HS-M8 (AS4777-2 2020)
9.999 kW · 1φ
Cygni 10.0HS-M9 (AS4777-2 2020)
9.999 kW · 1φ
Other CEC-approved products from Dyness available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.