Hybrid inverter · CSE · CEC approved December 2024
CEC listing: AIO1-PCS-3K-G1 (AS4777-2 2020)
A 3 kW single-phase hybrid inverter that is battery-ready.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us
Every figure on file for the CSE AIO1-PCS-3K-G1, by section.
| Specification | Value |
|---|---|
| Power & output | |
| Nominal power | 100 kW |
| Efficiency | |
| Max efficiency | 90% |
| Physical | |
| Dimensions (H×W×D) | 104 × 155 × 16 mm |
| Weight | 2600 kg |
| IP rating | IP54 |
| Operating temperature | 80°C to 0°C |
| Installation requirements | |
| Cable gauge | 4 mm² |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The CSE AIO1-PCS-3K-G1 against the closest-power inverters from other brands.
| Specification | Energizer FORCE 3.0HSEnergizer | Energizer Force 3SEnergizer | |
|---|---|---|---|
| Rated power? | 3 kW | 3 kW | 3 kW |
| Max efficiency? | 90.0% | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Single-phase |
| Type | Hybrid | Hybrid | Solar |
| Battery ready | Yes | Yes | No |
| Warranty | Not on file | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
Warranty summary
The warranty covers defects in materials and workmanship under normal use. Important exclusions include damage from unauthorized installation or modifications, and the warranty does not cover environmental damage from improper conditions.
The warranty covers defects in materials and workmanship under normal use. Important exclusions include damage from unauthorized installation or modifications, and the warranty does not cover environmental damage from improper conditions.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
Other CEC-approved products from CSE available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.