Loading Solar Battery Perth...

Hybrid inverter · Neovolt · Three Phase Hybrid Inverter series · CEC approved March 2025

Neovolt BW-INV-TPH10K

CEC listing: BW-INV-TPH10K (AS4777-2 2020)

A 10 kW three-phase hybrid inverter that is battery-ready.

Installed in Perth, typical: ~$4,750; Estimate for the inverter alone — your quote will vary
Rated power: 10kW; How much solar it can run at once — a large roof
Battery-ready: Yes; Hybrid: a battery plugs straight in, no second box

Datasheet (PDF)Compare inverters See the whole Three Phase Hybrid Inverter series

What we can tell you

Read from the figures on this page — no review written yet

It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
It needs a three-phase supply — check your switchboard, or ask your installer.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power How much solar it can turn into usable power at once: 10kW
Max efficiency How much of the solar you make reaches the house: 98.0%
Phases Needs a three-phase supply — check your switchboard: 3-phase
MPPT trackers 3 roof faces can be tuned independently: 3
Type Runs solar and a battery from one unit: Hybrid
Warranty How long Bytewatt Technology Co Ltd stands behind it: 5yr

Full datasheet

Every figure on file for the Neovolt BW-INV-TPH10K, by section.

Full datasheet, by section
Specification	Value
Efficiency
Max efficiency	98%
DC input & MPPT
MPPT trackers	3
Physical
Dimensions (H×W×D)	416 × 590 × 205 mm
Weight	29 kg
IP rating	IP65
Operating temperature	15°C to 30°C
Installation requirements
Cable gauge	16 mm²

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features & compatibility

Battery compatible

Yes

Backup capable

Yes

CEC approval details

CEC approved

4 Mar 2025

Approval expiry

4 Mar 2028

Status

Active

Eligible for rebates

Yes

About Bytewatt Technology Co Ltd

Years in AU Market

3 years

Australian Office

Not verified

CEC-Approved Batteries

CEC-Approved Panels

What it costs in Perth

Typical installed, inverter only

$3,500–$6,000

Estimate confidence: Medium

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 42.5 kWh
Annual yield: 15,513 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

3 years in Australian market

How it compares

The Neovolt BW-INV-TPH10K against the closest-power inverters from other brands.

Specification	Neovolt BW-INV-TPH10KNeovolt	Energizer Force 10.0HS+Energizer	Energizer Force 10.0HT+Energizer

Rated power?	10 kW	10 kW	10 kW
Max efficiency?	98.0%best value	0.0%	0.0%
MPPT trackers?	3	Not verified	Not verified

Phases	Three-phase	Single-phase	Three-phase
Type	Hybrid	Hybrid	Hybrid
Battery ready	Yes	Yes	Yes
Warranty	5 years	Not verified	Not verified

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Documents

5-year inverter warranty

Neovolt BW-INV-TPH10K

The warranty covers defects in materials and workmanship for ten years. Exclusions include improper installation and use, and the warranty is void if the product is modified or installed inappropriately. To make a claim, the Installer must contact Bytewatt with evidence of the fault.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Does not transfer with the home
What voids it: Improper installation by a non-accredited Installer, improper use or misuse, damage during transportation, and modifications by the Installer or End-User.
Environment limits: The ambient temperature during the operation of the Products shall not fall below -10 °C or exceed 50 °C.

Read the official warranty document (PDF)

Fault & error codes — Neovolt BW-INV-TPH10K

From the install manual

11 documented

Showing 11 of 11. The official install manual is the authoritative source — always confirm before acting.

100007criticalCall your installer
Manual (PDF)
Insulation fault
Likely cause
PV cable connections may be damaged.
What to do
Ensure PV cable connections are secure and undamaged.
100008criticalCall your installer
Manual (PDF)
GFCI fault
Likely cause
Ground Fault Circuit Interrupter issue.
What to do
Restart inverter and verify if the fault persists.
100009criticalCall your installer
Manual (PDF)
Leakage current test failure
Likely cause
Possible leakage of electricity.
What to do
Inspect for faults in wiring or connections.
100010criticalCall your installer
Manual (PDF)
Grid relay fault
Likely cause
Failure in the grid relay.
What to do
Contact installer for a hardware check.
100000warning
Manual (PDF)
Grid Over Voltage Protection
Likely cause
Check whether Grid is abnormal.
What to do
Confirm whether the grid cable connection is normal. Restart inverter and check whether the fault is existing.
100001warning
Manual (PDF)
Grid Under Voltage Protection
Likely cause
Grid voltage is below acceptable levels.
What to do
Confirm grid stability or settings.
100002warning
Manual (PDF)
Grid Over Frequency Protection
Likely cause
Grid frequency exceeds limits.
What to do
Check grid frequency conditions.
100003warning
Manual (PDF)
Grid Under Frequency Protection
Likely cause
Grid frequency below acceptable levels.
What to do
Check grid settings or stability.
100005warningCall your installer
Manual (PDF)
Bus Over Voltage Protection 1
Likely cause
Input voltage of PV exceeds limits.
What to do
Restart the inverter; check input voltage levels.
100011warningCall your installer
Manual (PDF)
Over Temperature
Likely cause
Surrounding environment causing overheating.
What to do
Ensure proper ventilation around the inverter; check installation requirements.
100014warningCall your installer
Manual (PDF)
Communication fault
Likely cause
Failure to communicate with components.
What to do
Restart the inverter and check communication setup.

Part of the Neovolt Three Phase Hybrid Inverter series

Compare every Neovolt Three Phase Hybrid Inverter variant side by side →

More Bytewatt Technology Co Ltd Inverters

BW-INV-TPH4K (AS4777-2 2020)

4 kW · 3φ

BW-INV-TPH5K (AS4777-2 2020)

5 kW · 3φ

BW-INV-TPH6K (AS4777-2 2020)

6 kW · 3φ

BW-INV-TPH8K (AS4777-2 2020)

8 kW · 3φ

BW-INV-SPB5K (AS4777-2 2020)

5 kW · 1φ

BW-INV-SPH3.6K (AS4777-2 2020)

3.68 kW · 1φ

View all Bytewatt Technology Co Ltd inverters

More from Bytewatt Technology Co Ltd

Other CEC-approved products from Bytewatt Technology Co Ltd available in Australia.

Bytewatt Technology Co Ltd Batteries

BW-BAT-10.1P

9.6 kWh · LFP

BW-BAT-10.1P II

19.2 kWh · LFP

BW-BAT-10.1P III

28.8 kWh · LFP

BW-BAT-10.1P IV

38.4 kWh · LFP

BW-BAT-10.1P V

48 kWh · LFP

BW-BAT-10.1P VI

57.6 kWh · LFP

View all Bytewatt Technology Co Ltd batteries

View full Bytewatt Technology Co Ltd manufacturer profile

Want to take the next step?

Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Hybrid inverter · Neovolt · Three Phase Hybrid Inverter series · CEC approved March 2025

Neovolt BW-INV-TPH10K

CEC listing: BW-INV-TPH10K (AS4777-2 2020)

A 10 kW three-phase hybrid inverter that is battery-ready.

Installed in Perth, typical: ~$4,750; Estimate for the inverter alone — your quote will vary
Rated power: 10kW; How much solar it can run at once — a large roof
Battery-ready: Yes; Hybrid: a battery plugs straight in, no second box

Datasheet (PDF)Compare inverters See the whole Three Phase Hybrid Inverter series

Spotted something outdated?

What we can tell you

Read from the figures on this page — no review written yet

It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
It needs a three-phase supply — check your switchboard, or ask your installer.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power How much solar it can turn into usable power at once: 10kW
Max efficiency How much of the solar you make reaches the house: 98.0%
Phases Needs a three-phase supply — check your switchboard: 3-phase
MPPT trackers 3 roof faces can be tuned independently: 3
Type Runs solar and a battery from one unit: Hybrid
Warranty How long Bytewatt Technology Co Ltd stands behind it: 5yr

Full datasheet

Every figure on file for the Neovolt BW-INV-TPH10K, by section.

Full datasheet, by section
Specification	Value
Efficiency
Max efficiency	98%
DC input & MPPT
MPPT trackers	3
Physical
Dimensions (H×W×D)	416 × 590 × 205 mm
Weight	29 kg
IP rating	IP65
Operating temperature	15°C to 30°C
Installation requirements
Cable gauge	16 mm²

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features & compatibility

Battery compatible

Yes

Backup capable

Yes

CEC approval details

CEC approved

4 Mar 2025

Approval expiry

4 Mar 2028

Status

Active

Eligible for rebates

Yes

About Bytewatt Technology Co Ltd

Years in AU Market

3 years

Australian Office

Not verified

CEC-Approved Batteries

CEC-Approved Panels

What it costs in Perth

Typical installed, inverter only

$3,500–$6,000

Estimate confidence: Medium

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 42.5 kWh
Annual yield: 15,513 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

3 years in Australian market

How it compares

The Neovolt BW-INV-TPH10K against the closest-power inverters from other brands.

Specification	Neovolt BW-INV-TPH10KNeovolt	Energizer Force 10.0HS+Energizer	Energizer Force 10.0HT+Energizer

Rated power?	10 kW	10 kW	10 kW
Max efficiency?	98.0%best value	0.0%	0.0%
MPPT trackers?	3	Not verified	Not verified

Phases	Three-phase	Single-phase	Three-phase
Type	Hybrid	Hybrid	Hybrid
Battery ready	Yes	Yes	Yes
Warranty	5 years	Not verified	Not verified

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Documents

5-year inverter warranty

Neovolt BW-INV-TPH10K

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Does not transfer with the home
What voids it: Improper installation by a non-accredited Installer, improper use or misuse, damage during transportation, and modifications by the Installer or End-User.
Environment limits: The ambient temperature during the operation of the Products shall not fall below -10 °C or exceed 50 °C.

Read the official warranty document (PDF)

Fault & error codes — Neovolt BW-INV-TPH10K

From the install manual

11 documented

Showing 11 of 11. The official install manual is the authoritative source — always confirm before acting.

100007criticalCall your installer
Manual (PDF)
Insulation fault
Likely cause
PV cable connections may be damaged.
What to do
Ensure PV cable connections are secure and undamaged.
100008criticalCall your installer
Manual (PDF)
GFCI fault
Likely cause
Ground Fault Circuit Interrupter issue.
What to do
Restart inverter and verify if the fault persists.
100009criticalCall your installer
Manual (PDF)
Leakage current test failure
Likely cause
Possible leakage of electricity.
What to do
Inspect for faults in wiring or connections.
100010criticalCall your installer
Manual (PDF)
Grid relay fault
Likely cause
Failure in the grid relay.
What to do
Contact installer for a hardware check.
100000warning
Manual (PDF)
Grid Over Voltage Protection
Likely cause
Check whether Grid is abnormal.
What to do
Confirm whether the grid cable connection is normal. Restart inverter and check whether the fault is existing.
100001warning
Manual (PDF)
Grid Under Voltage Protection
Likely cause
Grid voltage is below acceptable levels.
What to do
Confirm grid stability or settings.
100002warning
Manual (PDF)
Grid Over Frequency Protection
Likely cause
Grid frequency exceeds limits.
What to do
Check grid frequency conditions.
100003warning
Manual (PDF)
Grid Under Frequency Protection
Likely cause
Grid frequency below acceptable levels.
What to do
Check grid settings or stability.
100005warningCall your installer
Manual (PDF)
Bus Over Voltage Protection 1
Likely cause
Input voltage of PV exceeds limits.
What to do
Restart the inverter; check input voltage levels.
100011warningCall your installer
Manual (PDF)
Over Temperature
Likely cause
Surrounding environment causing overheating.
What to do
Ensure proper ventilation around the inverter; check installation requirements.
100014warningCall your installer
Manual (PDF)
Communication fault
Likely cause
Failure to communicate with components.
What to do
Restart the inverter and check communication setup.

Part of the Neovolt Three Phase Hybrid Inverter series

Compare every Neovolt Three Phase Hybrid Inverter variant side by side →

More Bytewatt Technology Co Ltd Inverters

BW-INV-TPH4K (AS4777-2 2020)

4 kW · 3φ

BW-INV-TPH5K (AS4777-2 2020)

5 kW · 3φ

BW-INV-TPH6K (AS4777-2 2020)

6 kW · 3φ

BW-INV-TPH8K (AS4777-2 2020)

8 kW · 3φ

BW-INV-SPB5K (AS4777-2 2020)

5 kW · 1φ

BW-INV-SPH3.6K (AS4777-2 2020)

3.68 kW · 1φ

View all Bytewatt Technology Co Ltd inverters