Loading Solar Battery Perth...
Loading Solar Battery Perth...
Battery inverter · Anker · Anker SOLIX X1 series · CEC approved October 2024
CEC listing: X1-P6K-B15-S (AS4777-2 2020)
A 6 kW single-phase battery inverter.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Rated power
How much solar it can turn into usable power at once
Max efficiency
How much of the solar you make reaches the house
Phases
Runs on a standard single-phase supply
Type
Runs a battery; pairs with a separate solar inverter
Warranty
How long Anker innovations Limited stands behind it
Every figure on file for the Anker X1-P6K-B15-S, by section.
| Specification | Value |
|---|---|
| Efficiency | |
| Max efficiency | 96% |
| Physical | |
| Weight | 20 kg |
| IP rating | IP66 |
| Installation requirements | |
| Top clearance | 10 mm |
| Side clearance | 20 mm |
| AC breaker | 10 A |
| Cable gauge | 6 mm² |
| Earthing method | TN-S |
| DNSP pre-approval | Yes |
| Estimated install time | 5 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Battery compatible
Yes
Backup capable
Yes
CEC approved
4 Oct 2024
Approval expiry
4 Oct 2027
Status
Active
Eligible for rebates
Yes
Years in AU Market
2 years
Australian Office
Not verified
CEC-Approved Batteries
12
CEC-Approved Panels
0
Category
Budget
Typical installed, inverter only
$1,800–$3,300
Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.
Compare quotes from installers you choose
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
Website
www.anker.com/auThe Anker X1-P6K-B15-S against the closest-power inverters from other brands.
| Specification | Anker X1-P6K-B15-SAnker | Energizer FORCE 6.0HSEnergizer | Energizer Force 6.0HT+Energizer |
|---|---|---|---|
| Rated power? | 6 kW | 6 kW | 6 kW |
| Max efficiency? | 96.0%best value | 0.0% | 0.0% |
| MPPT trackers? | Not verified | Not verified | Not verified |
| Phases | Single-phase | Single-phase | Three-phase |
| Type | Battery | Hybrid | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | 10 years | Not verified | Not verified |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
The Anker SOLIX X1 Battery is covered for 10 years. Warranty excludes non-accredited installs and requires claims processing through Anker support.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
Part of the Anker Anker SOLIX X1 series
Compare every Anker Anker SOLIX X1 variant side by side →
X1-H10K-T (AS4777-2 2020)
10 kW · 3φ
X1-H12K-T (AS4777-2 2020)
12 kW · 3φ
X1-H3.68K-S (AS4777-2 2020)
3.68 kW · 1φ
X1-H4.6K-S (AS4777-2 2020)
4.6 kW · 1φ
X1-H5K-S (AS4777-2 2020)
5 kW · 1φ
X1-H5K-T (AS4777-2 2020)
5 kW · 3φ
Other CEC-approved products from Anker innovations Limited available in Australia.
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.