Loading Solar Battery Perth...

Home battery · Renoz Energy · CEC approved July 2025

Renoz Energy LV-5KWH100AH

A 4.61 kWh home battery.

Installed in Perth, after rebates: ~$4,149; Typical estimate — your own quote will vary
WA Battery Scheme rebate: $0; It's under the scheme's 5 kWh minimum size
Usable capacity: 4.61kWh; Below the smaller-home band

Datasheet (PDF)See the whole LV Stackable series

What we can tell you

Read from the figures on this page. No review written yet.

4.61 kWh is below the smaller-home band — this is one module of a larger stack.
It is CEC-approved, which is a condition of both the federal STC discount and the WA Battery Scheme.
We can't score it: a value score needs a price and full specs, and without them any number would be guesswork.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Usable capacity How much energy it stores for you to use: 4.61kWh
Continuous power How much it can run at once — the essentials, not the whole house: 4.61kW
Round-trip efficiency How much of the energy you store comes back out: 90%
Depth of discharge How much of the battery you can actually use: 90%
Warranty 70% of capacity guaranteed at the end of it: 10yr
Battery chemistry Lithium iron phosphate — the long-cycle-life type: LFP

Full datasheet

Every figure on file for the Renoz Energy LV Stackable, by section.

Full datasheet, by section
Specification	Value
Cell & chemistry
Chemistry	LFP
Cell type	Prismatic
Capacity & power
Nominal capacity	5.12 kWh
Usable capacity	4.61 kWh
Continuous power	4.61 kW
Peak power	4.61 kW
Depth of discharge	90%
Round-trip efficiency	90%
Nominal voltage	51.2 V
Lifespan & degradation
Cycle life	6000 cycles
Capacity retained at year 10	70%
Warranted throughput	0 MWh
Modularity & stacking
Modular / stackable	Yes
Maximum stack	40.96 kWh
Backup & grid services
Backup capable	No
VPP ready	No
Physical
Dimensions (H×W×D)	640 × 450 × 177 mm
Weight	53 kg
IP rating	IP40
Operating environment
Operating temperature	-20°C to 55°C

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Documents

Warranty and support

Warranty terms and Australian support structure.

The warranty covers a 10-year limited product guarantee. Warranty excludes non-accredited installations. Claims can be made by referring to the warranty documentation.

Duration

years

Throughput

—

not on record

Max Temp

55°

celsius

Max Backup

Level 0

No Backup

Australian support structure

Not verified

We have not verified this brand's Australian support structure. Confirm warranty arrangements with the manufacturer or your installer.

Perth heat

Rated to 55°C, which covers Perth's hottest days.

Key warranty terms

•Depth of Discharge: 90% usable capacity
•Round-trip Efficiency: 90% rated
•Annual Degradation: ~2.5% per year expected
•Installation: Must be installed by SAA-accredited installer
•Operating Conditions: -20°C to 55°C

✗ Non-transferableFull replacement≥70% capacity at year 10

Warranty Document Datasheet Compare Warranties

WA Battery Scheme eligibility

Check eligibility

Synergy SSL inverter pairing, VPP participation and state-rebate qualification for this battery. Rebate and STC amounts are shown in the pricing panel.

CSIP-AUS compliant
Inverter must be CSIP-AUS compliant under the current WA framework.
Synergy SSL approved inverter
Needs pairing with a Synergy SSL approved inverter.
VPP activation ready
VPP activation requires a Synergy SSL approved inverter.
WA Battery Scheme rebate
Requires Battery Rewards participation under the current WA framework.
Synergy Battery Rewards
Requires a CSIP-AUS compliant system and reliable internet.
Interest-free loan
Not eligible for interest-free financing.

Under current WA rules, new rebate applications require VPP enrolment and CSIP-AUS compliance. How the scheme works · Estimate VPP earnings

About RENOZ ENERGY

View Full Profile →

Years in AU Market1+ years

Local SupportNot verified

CEC-Listed Products1 models

1yr AU

CEC-approved products since 2025

1 year in the Australian market

Fault & error codes — Renoz Energy LV Stackable

Extracted from the installation manual

30 documented

Showing 30 of 30. The official install manual is the authoritative source — always confirm before acting.

100criticalCall your installer
Manual (PDF)
Discharge relay fault
Likely cause
Failure in discharge relay
What to do
Restart the battery, contact installer if persists
101criticalCall your installer
Manual (PDF)
Charge relay fault
Likely cause
Failure in charge relay
What to do
Restart the battery, contact installer if persists
102criticalCall your installer
Manual (PDF)
Cell failure
Likely cause
Malfunctioning cell detected
What to do
Restart the battery, contact installer if persists
103criticalCall your installer
Manual (PDF)
Temperature sensor malfunction
Likely cause
Temperature sensor failure
What to do
Restart the battery, contact installer if persists
104criticalCall your installer
Manual (PDF)
Current sensor malfunction
Likely cause
Current sensor failure
What to do
Restart the battery, contact installer if persists
105criticalCall your installer
Manual (PDF)
Battery module lost communication with controller
Likely cause
Communication failure with the battery controller
What to do
Check dial switch settings; restart battery if needed
106criticalCall your installer
Manual (PDF)
Short circuit detected
Likely cause
Improper external connections
What to do
Disconnect all connections and restart the battery
107criticalCall your installer
Manual (PDF)
Battery total voltage sensor malfunction
Likely cause
Fault in total voltage sensing
What to do
Restart the battery, contact installer if persists
108criticalCall your installer
Manual (PDF)
Heating function failure
Likely cause
Failure in battery heating function
What to do
Restart the battery, contact installer if persists
109criticalCall your installer
Manual (PDF)
Battery module address conflict
Likely cause
Conflicting addresses set on battery modules
What to do
Check address settings; restart battery if needed
110criticalCall your installer
Manual (PDF)
Main controller address conflict
Likely cause
Conflicting addresses set on main controller
What to do
Check address settings; restart battery if needed
111criticalCall your installer
Manual (PDF)
Charge MOS malfunction
Likely cause
Failure in charge MOS system
What to do
Restart the battery, contact installer if persists
112criticalCall your installer
Manual (PDF)
Discharge MOS malfunction
Likely cause
Failure in discharge MOS system
What to do
Restart the battery, contact installer if persists
201criticalCall your installer
Manual (PDF)
High cell voltage charge safety lock
Likely cause
Cell voltage exceeds maximum charge limits
What to do
Restart the battery, contact installer if persists
202criticalCall your installer
Manual (PDF)
Over temp charge safety lock
Likely cause
Battery temperature exceeds maximum charge limits
What to do
Restart the battery, contact installer if persists
203criticalCall your installer
Manual (PDF)
Low temp charge safety lock
Likely cause
Battery temperature drops below charge minimums
What to do
Restart the battery, contact installer if persists
204criticalCall your installer
Manual (PDF)
Over temp discharge safety lock
Likely cause
Battery temperature exceeds discharge limits
What to do
Restart the battery, contact installer if persists
205criticalCall your installer
Manual (PDF)
Low temp discharge safety lock
Likely cause
Battery temperature drops below discharge minimums
What to do
Restart the battery, contact installer if persists
206criticalCall your installer
Manual (PDF)
Overcurrent charge safety lock
Likely cause
Current exceeds charge limits
What to do
Restart the battery, contact installer if persists
207criticalCall your installer
Manual (PDF)
Overcurrent discharge safety lock
Likely cause
Current exceeds discharge limits
What to do
Restart the battery, contact installer if persists
1warning
Manual (PDF)
Low cell voltage discharge protection
Likely cause
Low voltage level caused by battery discharge
What to do
Charge the battery to restore voltage level
10warningCall your installer
Manual (PDF)
High relay temp protection
Likely cause
Relay temperature exceeds limits
What to do
Restart the battery, if issue persists, contact installer
2warning
Manual (PDF)
Overcurrent charge protection
Likely cause
Excess current during charging
What to do
Restore to factory settings; check inverter's max current settings
3warning
Manual (PDF)
Overcurrent discharge protection
Likely cause
Exceeding the power of battery during discharge
What to do
Reduce load to match battery capacity
4warning
Manual (PDF)
Over temp charge protection
Likely cause
Battery temperature exceeds 55℃
What to do
Turn off the battery until temperature drops below 55℃
5warning
Manual (PDF)
Over temp discharge protection
Likely cause
Battery temperature exceeds 55℃ during discharge
What to do
Turn off the battery until temperature drops below 55℃
6warning
Manual (PDF)
Low temp charge protection
Likely cause
Battery temperature below 0℃ during charge
What to do
Turn off battery until temperature rises above 0℃
7warning
Manual (PDF)
Low temp discharge protection
Likely cause
Battery temperature below -20℃ during discharge
What to do
Turn off battery until temperature rises above -20℃
8warning
Manual (PDF)
High ambient temp protection
Likely cause
Ambient temperature above 50℃
What to do
Ensure ambient temperature is maintained below 50℃
9warningCall your installer
Manual (PDF)
Cell voltage off-set protection
Likely cause
Discrepancy in cell voltages detected
What to do
Restart the battery, if issue persists, contact installer

What it costs in Perth

$4,149

Typical installed price, before rebates

WA Battery Scheme: $0
Federal STCs: $0
You’d pay about: $4,149

The WA rebate is $0 here: it's under the scheme's 5 kWh minimum size. Federal STCs are $0 here: this battery is below the size where the program issues certificates. Estimates only; your quote will vary.

Explore your options

Which size band is your home?

Usable capacity, for one battery system

Smaller home: 10–15 kWh
Medium home: 20–30 kWh
Big home: 30–40 kWh
Very big home: 40+ kWh

This battery is below the smaller-home band. The WA rebate caps at 10 kWh, but that is a rebate limit, not a sizing guide.

Frequently asked questions

How it compares

The Renoz Energy LV-5KWH100AH against the closest-sized batteries from other brands.

Specification	Renoz Energy LV-5KWH100AHRenoz Energy	Dyness DL5.0Dyness	Dyness PowerDepot H5BDyness

Usable capacity?	4.61 kWh	4.61 kWh	4.61 kWh
Continuous power?	4.61 kW	Not verified	Not verified
Peak power?	4.61 kW	Not verified	Not verified

Round-trip efficiency?	90%	92%best value	92%best value
Warranty	10 years	Not verified	Not verified
Chemistry	LFP	LFP	LFP

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Want to take the next step?

Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.

This model is one entry in the desk's index of solar batteries for Perth — every CEC-approved battery on one comparable dataset.

Product Information Disclaimer:

Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.

Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.