Loading Solar Battery Perth...

Home battery · Pytes · CEC approved April 2026

Pytes V10

A 9.98 kWh home battery.

Installed in Perth, after rebates: ~$6,309; Typical estimate — your own quote will vary
WA Battery Scheme rebate: Depends on your inverter; The scheme needs a Synergy-approved inverter — we don't know yours
Usable capacity: 9.98kWh; Below the smaller-home band

What we can tell you

Read from the figures on this page. No review written yet.

9.98 kWh is below the smaller-home band — this is one module of a larger stack.
It is CEC-approved, which is a condition of both the federal STC discount and the WA Battery Scheme.
We can't score it: a value score needs a price and full specs, and without them any number would be guesswork.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Usable capacity How much energy it stores for you to use: 9.98kWh
Continuous power How much it can run at once — most of a home, but not everything at full tilt: 5.12kW
Round-trip efficiency How much of the energy you store comes back out: 92%
Depth of discharge How much of the battery you can actually use: 90%
Warranty 90% of capacity guaranteed at the end of it: 10yr
Battery chemistry Lithium iron phosphate — the long-cycle-life type: LFP

Full datasheet

Every figure on file for the Pytes V10, by section.

Full datasheet, by section
Specification	Value
Cell & chemistry
Chemistry	LFP
Cell type	Tier 1 automotive-grade 230 Ah cells
Capacity & power
Nominal capacity	9.98 kWh
Usable capacity	9.98 kWh
Continuous power	5.12 kW
Peak power	10.24 kW
Nominal voltage	51.2 V
Lifespan & degradation
Cycle life	8000 cycles
Capacity retained at year 10	90%
Warranted throughput	19.35 MWh
Modularity & stacking
Modular / stackable	Yes
Maximum stack	160 kWh
Backup & grid services
Backup capable	No
VPP ready	No
Physical
Dimensions (H×W×D)	520 × 640 × 260 mm
Weight	98.4 kg
IP rating	IP66
Operating environment
Operating temperature	0°C to 58°C
Installation requirements
Top clearance	500 mm
Side clearance	500 mm
Front clearance	500 mm
AC breaker	125 A
Cable gauge	10 mm²
Earthing method	TN-S
DNSP pre-approval	No
Estimated install time	6 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Documents

Warranty and support

Warranty terms and Australian support structure.

The warranty covers manufacturing defects for 10 years, with 90% capacity retention but excludes damage from unauthorized alterations. To claim, contact your authorized distributor with purchase proof.

Duration

years

Throughput

19.35

MWh

Max Temp

58°

celsius

Max Backup

Level 0

No Backup

Australian support structure

Not verified

We have not verified this brand's Australian support structure. Confirm warranty arrangements with the manufacturer or your installer.

Perth heat

Rated to 58°C, which covers Perth's hottest days.

Key warranty terms

•Depth of Discharge: 90% usable capacity
•Round-trip Efficiency: 92% rated
•Annual Degradation: ~2.5% per year expected
•Installation: Must be installed by SAA-accredited installer
•Operating Conditions: 0°C to 58°C

✗ Non-transferableFull replacement≥90% capacity at year 10

Warranty Document Datasheet Compare Warranties

WA Battery Scheme eligibility

Check eligibility

Synergy SSL inverter pairing, VPP participation and state-rebate qualification for this battery. Rebate and STC amounts are shown in the pricing panel.

CSIP-AUS compliant
Inverter must be CSIP-AUS compliant under the current WA framework.
Synergy SSL approved inverter
Needs pairing with a Synergy SSL approved inverter.
VPP activation ready
VPP activation requires a Synergy SSL approved inverter.
WA Battery Scheme rebate
Requires Battery Rewards participation under the current WA framework.
Synergy Battery Rewards
Requires a CSIP-AUS compliant system and reliable internet.
Interest-free loan
Not eligible for interest-free financing.

Under current WA rules, new rebate applications require VPP enrolment and CSIP-AUS compliance. How the scheme works · Estimate VPP earnings

About Pytes

View Full Profile →

Years in AU Market3+ years

Local SupportNot verified

CEC-Listed Products12 models

3yr AU

CEC-approved products since 2023

3 years in the Australian market

Fault & error codes — Pytes V10

Extracted from the installation manual

6 documented

Showing 6 of 6. The official install manual is the authoritative source — always confirm before acting.

ALM002criticalCall your installer
Manual (PDF)
Charge over Voltage
Likely cause
Voltage exceeds the maximum charge threshold.
What to do
Disconnect charger immediately and verify charger settings.
ALM004criticalCall your installer
Manual (PDF)
Charge/Discharge Over Current
Likely cause
Current exceeds safe operating limits during charge or discharge.
What to do
Stop use immediately and verify current settings.
ALM005criticalCall your installer
Manual (PDF)
High Temperature
Likely cause
Battery temperature exceeds safe operational levels.
What to do
Allow battery to cool down and ensure proper ventilation.
ALM001warning
Manual (PDF)
Low Voltage
Likely cause
Battery voltage is below acceptable range.
What to do
Check power connections and charge the battery.
ALM003warning
Manual (PDF)
Discharge under Voltage
Likely cause
Battery is too discharged to operate normally.
What to do
Charge the battery as soon as possible.
ALM006warning
Manual (PDF)
Low Temperature
Likely cause
Battery temperature is below optimal operating range.
What to do
Wait until battery reaches safe temperature before using.

What it costs in Perth

$8,982

Typical installed price, before rebates

WA Battery Scheme: Depends on your inverter
Federal STCs: −$2,673
You’d pay about: $6,309

The WA Battery Scheme (up to $1,300) needs a Synergy-approved inverter and VPP enrolment. We don't know which inverter you'd pair this with, so it isn't deducted above — ask your installer. STCs assume about $39.9 a certificate. Estimates only; your quote will vary.

Explore your options

Which size band is your home?

Usable capacity, for one battery system

Smaller home: 10–15 kWh
Medium home: 20–30 kWh
Big home: 30–40 kWh
Very big home: 40+ kWh

This battery is below the smaller-home band. The WA rebate caps at 10 kWh, but that is a rebate limit, not a sizing guide.

Does waiting change the rebate?

Estimated federal rebate (STCs) for this 9.98 kWh battery

How it compares

The Pytes V10 against the closest-sized batteries from other brands.

Specification	Pytes V10Pytes	Whes BXC-4.992kWh-2SWhes	Whes BXC-4.992kWh-2S-IWhes

Usable capacity?	9.98 kWh	9.98 kWh	9.98 kWh
Continuous power?	5.12 kW	Not verified	Not verified
Peak power?	10.24 kW	Not verified	Not verified

Round-trip efficiency?	92%	92%	92%
Warranty	10 years	Not verified	Not verified
Chemistry	LFP	LFP	LFP

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Want to take the next step?

Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.

This model is one entry in the desk's index of solar batteries for Perth — every CEC-approved battery on one comparable dataset.

Product Information Disclaimer:

Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.

Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.