Loading Solar Battery Perth...

Home battery · OLiPower · CEC approved March 2026

OLiPower OLP-EB-V386_E79

A 79.59 kWh home battery — very big home size, the 40+ kWh band.

Installed in Perth, after rebates: ~$64,688; Typical estimate — your own quote will vary
WA Battery Scheme rebate: Depends on your inverter; The scheme needs a Synergy-approved inverter — we don't know yours
Usable capacity: 79.59kWh; Very big home size — the 40+ kWh band

Datasheet (PDF)See the whole OLP-EB series

What we can tell you

Read from the figures on this page — no review written yet

79.59 kWh sits in the very big home band (40+ kWh).
It is CEC-approved, which is a condition of both the federal STC discount and the WA Battery Scheme.
We can't score it: a value score needs a price and full specs, and without them any number would be guesswork.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Usable capacity How much energy it stores for you to use: 79.59kWh
Round-trip efficiency How much of the energy you store comes back out: 92%
Depth of discharge How much of the battery you can actually use: 90%
Warranty How long the manufacturer stands behind it: 10yr
Battery chemistry Lithium iron phosphate — the long-cycle-life type: LFP
Size and weight 0 × 0 × 0 mm — roughly a large suitcase on the wall: 150kg

Full datasheet

Every figure on file for the OLiPower OLP-EB, by section.

Full datasheet, by section
Specification	Value
Cell & chemistry
Chemistry	LFP
Cell type	LFP
Capacity & power
Nominal capacity	79.59 kWh
Usable capacity	79.59 kWh
Continuous power	0 kW
Peak power	0 kW
Nominal voltage	386.4 V
Modularity & stacking
Modular / stackable	No
Maximum stack	0 kWh
Backup & grid services
Backup capable	No
VPP ready	No
Physical
Dimensions (H×W×D)	0 × 0 × 0 mm
Weight	150 kg
IP rating	IP54
Operating environment
Operating temperature	0°C to 0°C
Installation requirements
Top clearance	300 mm
Side clearance	300 mm
Front clearance	1000 mm
AC breaker	250 A
Cable gauge	25 mm²
Earthing method	TN-S
DNSP pre-approval	Yes
Estimated install time	8 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Documents

Warranty and support

Warranty terms and Australian support structure.

Duration

years

Throughput

∞

MWh

Max Temp

0°

celsius

Max Backup

Level 0

No Backup

Australian support structure

Not verified

We have not verified this brand's Australian support structure. Confirm warranty arrangements with the manufacturer or your installer.

Perth climate suitability

Indoor installation recommended

Rated only to 0°C. Perth summers can exceed that, so install in a climate-controlled space.

Key warranty terms

•Depth of Discharge: 90% usable capacity
•Round-trip Efficiency: 92% rated
•Annual Degradation: ~2.5% per year expected
•Installation: Must be installed by SAA-accredited installer
•Operating Conditions: 0°C to 0°C

Warranty Document Datasheet Compare Warranties

WA Battery Scheme eligibility

Conditional

Synergy SSL inverter pairing, VPP participation and state-rebate qualification for this battery. Rebate and STC amounts are shown in the pricing panel.

AC-coupled system: needs a gateway device on the Synergy SSL (e.g. SMA, Redback), or a same-brand inverter + battery pair (Sungrow or Fronius) for shared compliance. Without one, export is limited to 1.5kW and VPP/DEBS/rebate/loan are unavailable — and third-party gateways can struggle to meet compliance testing. Any later addition to an AC-coupled system triggers whole-of-site compliance, so for many homes replacing toward a hybrid (DC-coupled) inverter is the sounder path. AC vs DC coupling

CSIP-AUS compliant
Inverter must be CSIP-AUS compliant under the current WA framework.
Synergy SSL approved inverter
Needs pairing with a Synergy SSL approved inverter.
VPP activation ready
VPP activation requires a Synergy SSL approved inverter.
WA Battery Scheme rebate
Requires Battery Rewards participation under the current WA framework.
Synergy Battery Rewards
Requires a CSIP-AUS compliant system and reliable internet.
Interest-free loan
Not eligible for interest-free financing.

Under current WA rules, new rebate applications require VPP enrolment and CSIP-AUS compliance. How the scheme works · Estimate VPP earnings

About OLiPower

View Full Profile →

Years in AU Market3+ years

Local SupportNot verified

CEC-Listed Products21 models

3yr AU

CEC-approved products since 2023

3 years in the Australian market

Fault & error codes — OLiPower OLP-EB

Extracted from the installation manual

40 documented

Showing 40 of 40. The official install manual is the authoritative source — always confirm before acting.

1criticalCall your installer
Manual (PDF)
Overvoltage Fault of Battery Cell
Likely cause
1. BMS malfunction 2. Voltage collection point malfunction 3. Overcharging
What to do
1. Replace BMS 2. Check the voltage collection point 3. Stop charging
11criticalCall your installer
Manual (PDF)
Low Insulation Fault
Likely cause
1. Not grounded 2. Rainwater or liquids entering the equipment
What to do
1. Check if the grounding circuit is installed correctly 2. Check if the equipment is wet
14criticalCall your installer
Manual (PDF)
Fire Trigger
Likely cause
The temperature sensor and smoke sensor are triggered simultaneously, and the fire extinguishing device is activated
What to do
Contact the manufacturer
15criticalCall your installer
Manual (PDF)
BMS Communication Failure
Likely cause
1. BMS malfunction 2. BMS communication line disconnected
What to do
1. Replace BMS 2. Check the BMS communication cable
2criticalCall your installer
Manual (PDF)
Undervoltage Fault of Battery Cell
Likely cause
1. BMS malfunction 2. Voltage collection point malfunction 3. Long term non-charging
What to do
1. Replace BMS 2. Check the voltage collection point 3. Charge in a timely manner
3criticalCall your installer
Manual (PDF)
Battery Total Voltage Overvoltage Fault
Likely cause
Overcharging
What to do
Stop charging, Check the inverter
4criticalCall your installer
Manual (PDF)
Battery Total Voltage Undervoltage Fault
Likely cause
Long term non-charging
What to do
Charge in a timely manner, Check the inverter
ALARM-01criticalCall your installer
Manual (PDF)
Earth fault alarm
Likely cause
Earth impedance of the PV arrays below safe level
What to do
Address potential earth faults immediately; consult installer
Battery Total Voltage Overvoltage FaultcriticalCall your installer
Manual (PDF)
Total battery voltage exceeds limits
Likely cause
Overcharging
What to do
Stop charging, Check the inverter
BESS_FAILUREcriticalCall your installer
Manual (PDF)
Battery Energy Storage System failure or maintenance required
Likely cause
A malfunction in the battery management system or battery itself
What to do
Contact your installer or technician immediately for service
BESS_FAULTcriticalCall your installer
Manual (PDF)
Battery Energy Storage System failure or maintenance required
Likely cause
Malfunction or issue with the battery system
What to do
Contact your installer or technician to check the battery system
BESS-01criticalCall your installer
Manual (PDF)
Battery Energy Storage System failure or maintenance required
Likely cause
Internal system malfunction or maintenance requirements
What to do
Contact your installer to investigate and resolve the issue
BMS Communication FailurecriticalCall your installer
Manual (PDF)
Communication failure with the Battery Management System
Likely cause
BMS malfunction, BMS communication line disconnected
What to do
Replace BMS, Check the BMS communication cable
Emergency Stop TriggeredcriticalCall your installer
Manual (PDF)
Emergency stop has been triggered
Likely cause
Wiring issue of the emergency stop function
What to do
Check the energy storage cabinet and restore it manually after no faults are found
Fire TriggercriticalCall your installer
Manual (PDF)
Temperature or smoke sensors triggered fire alarm
Likely cause
Temperature sensor and smoke sensor are triggered simultaneously
What to do
Contact the manufacturer
GRID-01criticalCall your installer
Manual (PDF)
Grid connection failure
Likely cause
Issues with grid connection or settings
What to do
Check grid connection settings; contact installer if necessary
High Temperature Fault During Battery ChargingcriticalCall your installer
Manual (PDF)
Battery temperature is too high while charging
Likely cause
BMS malfunction, Temperature collection point malfunction, Air Conditioning Abnormal
What to do
Replace BMS, Check the Temperature collection point, Check the air conditioner wiring harness and restart the air conditioner
High Temperature Fault During Battery DischargecriticalCall your installer
Manual (PDF)
Battery temperature is too high while discharging
Likely cause
BMS malfunction, Temperature collection point malfunction, Air Conditioning Abnormal
What to do
Replace BMS, Check the Temperature collection point, Check the air conditioner wiring harness and restart the air conditioner
Low Insulation FaultcriticalCall your installer
Manual (PDF)
Insulation is faulty
Likely cause
Not grounded, Rainwater or liquids entering the equipment
What to do
Check if the grounding circuit is installed correctly, Check if the equipment is wet
Overvoltage Fault of Battery CellcriticalCall your installer
Manual (PDF)
Battery cell voltage is too high
Likely cause
BMS malfunction, Voltage collection point malfunction, Overcharging
What to do
Replace BMS, Check the voltage collection point, Stop charging
10warning
Manual (PDF)
Battery Discharge Overcurrent Fault
Likely cause
Discharge current exceeds the maximum current of the battery
What to do
Reduce discharge power
12warning
Manual (PDF)
SOC Low Alarm
Likely cause
Low battery level
What to do
Charge processing
13warning
Manual (PDF)
Air Conditioner Communication Failure
Likely cause
BMS and air conditioner communication line disconnected
What to do
Check the communication line between BMS and air conditioner
16warning
Manual (PDF)
Emergency Stop Triggered
Likely cause
Check the wiring of the emergency stop function
What to do
Check the energy storage cabinet and restore it manually after no faults are found
5warningCall your installer
Manual (PDF)
High Temperature Fault During Battery Charging
Likely cause
1. BMS malfunction 2. Temperature collection point malfunction 3. Air Conditioning Abnormal
What to do
1. Replace BMS 2. Check the Temperature collection point 3. Check the air conditioner wiring harness and restart the air conditioner
6warningCall your installer
Manual (PDF)
Low Temperature Fault During Battery Charging
Likely cause
1. BMS malfunction 2. Temperature collection point malfunction 3. Air Conditioning Abnormal
What to do
1. Replace BMS 2. Check the Temperature collection point 3. Check the air conditioner wiring harness and restart the air conditioner
7warningCall your installer
Manual (PDF)
High Temperature Fault During Battery Discharge
Likely cause
1. BMS malfunction 2. Temperature collection point malfunction 3. Air Conditioning Abnormal
What to do
1. Replace BMS 2. Check the Temperature collection point 3. Check the air conditioner wiring harness and restart the air conditioner
8warningCall your installer
Manual (PDF)
Low Temperature Fault During Battery Discharge
Likely cause
1. BMS malfunction 2. Temperature collection point malfunction 3. Air Conditioning
What to do
1. Replace BMS 2. Check the Temperature collection point 3. Check the air conditioner wiring
9warning
Manual (PDF)
Battery Charging Overcurrent Fault
Likely cause
Charging current exceeds the maximum current of the battery
What to do
Reduce charging power
AB-01warningCall your installer
Manual (PDF)
Battery abnormality
Likely cause
Battery not properly connected or malfunctioning
What to do
Check battery connections; contact installer if issue persists
Air Conditioner Communication Failurewarning
Manual (PDF)
Unable to communicate with the air conditioner
Likely cause
BMS and air conditioner communication line disconnected
What to do
Check the communication line between BMS and air conditioner
Battery Charging Overcurrent Faultwarning
Manual (PDF)
Charging current exceeds maximum allowed
Likely cause
Charging current exceeds the maximum current of the battery
What to do
Reduce charging power
Battery Discharge Overcurrent Faultwarning
Manual (PDF)
Discharge current exceeds maximum allowed
Likely cause
Discharge current exceeds the maximum current of the battery
What to do
Reduce discharge power
Battery Total Voltage Undervoltage FaultwarningCall your installer
Manual (PDF)
Total battery voltage is too low
Likely cause
Long term non-charging
What to do
Charge in a timely manner, Check the inverter
BATTERY_ABNORMALwarningCall your installer
Manual (PDF)
Battery abnormal alarm
Likely cause
Battery disconnection or malfunction
What to do
Check battery connections and status; contact installer if needed
GRID_FAILUREwarning
Manual (PDF)
Grid failure alarm
Likely cause
Loss of power from the grid
What to do
Wait for grid recovery; if alarm persists, contact your installer
Low Temperature Fault During Battery ChargingwarningCall your installer
Manual (PDF)
Battery temperature is too low while charging
Likely cause
BMS malfunction, Temperature collection point malfunction, Air Conditioning Abnormal
What to do
Replace BMS, Check the Temperature collection point, Check the air conditioner wiring harness and restart the air conditioner
Low Temperature Fault During Battery DischargewarningCall your installer
Manual (PDF)
Battery temperature is too low while discharging
Likely cause
BMS malfunction, Temperature collection point malfunction
What to do
Replace BMS, Check the Temperature collection point, Check the air conditioner wiring
SOC Low Alarmwarning
Manual (PDF)
State of Charge is low
Likely cause
Low battery level
What to do
Charging processing
Undervoltage Fault of Battery CellwarningCall your installer
Manual (PDF)
Battery cell voltage is too low
Likely cause
BMS malfunction, Voltage collection point malfunction, Long term non-charging
What to do
Replace BMS, Check the voltage collection point, Charge in a timely manner

What it costs in Perth

$71,631

Typical installed price, before rebates

WA Battery Scheme: Depends on your inverter
Federal STCs: −$6,943
You’d pay about: $64,688

The WA Battery Scheme (up to $1,300) needs a Synergy-approved inverter and VPP enrolment. We don't know which inverter you'd pair this with, so it isn't deducted above — ask your installer. STCs assume about $39.9 a certificate. Estimates only; your quote will vary.

Explore your options

Which size band is your home?

Usable capacity, for one battery system

Smaller home: 10–15 kWh
Medium home: 20–30 kWh
Big home: 30–40 kWh
Very big home: 40+ kWh

This battery is one unit in the very big home band. The WA rebate caps at 10 kWh, but that is a rebate limit, not a sizing guide.

The federal rebate shrinks each year

STC value for this 79.59 kWh battery

How it compares

The OLiPower OLP-EB-V386_E79 against the closest-sized batteries from other brands.

Specification	OLiPower OLP-EB-V386_E79OLiPower	GoodWe GW81.9-BAT-AC-G10GoodWe	ZYC Energy SIMPO HV Pro80.6ZYC Energy

Usable capacity?	79.59 kWh	80 kWh	80.6 kWhbest value
Continuous power?	0 kW	Not verified	Not verified
Peak power?	0 kW	Not verified	Not verified

Round-trip efficiency?	92%	92%	92%
Warranty	10 years	10 years	10 years
Chemistry	LFP	LFP	LFP

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Want to take the next step?

Compare quotes from SAA-accredited local installers — you choose which to act on. No obligation.

This model is one entry in the desk's index of solar batteries for Perth — every CEC-approved battery on one comparable dataset.

Product Information Disclaimer:

Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.

Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.