Loading Solar Battery Perth...

Product Information Disclaimer:

Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.

Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.

Back to all batteries

CEC approved: Dec 2024Report outdated info

NEOVOLT BW-BAT-9.6P I

BW-BAT-9.6P series

CEC Approved

Usable capacity: 9.1 kWh
Warranty: 10 yr
Chemistry: LFP

About NEOVOLT

Years in AU Market3+ years

Local SupportNot verified

CEC-Listed Products14 models

3yr AU

CEC-approved products since 2023

3 years in the Australian market

Warranty and support

Warranty terms and Australian support structure.

The warranty covers defects in materials and workmanship for 10 years. Major exclusions include improper installation and use, as well as environmental factors such as extreme temperatures. To claim, contact Bytewatt with necessary information about the fault.

Duration

years

Throughput

Max Temp

celsius

Max Backup

Level 0

No Backup

Australian support structure

Not verified

We have not verified this brand's Australian support structure. Confirm warranty arrangements with the manufacturer or your installer.

Perth climate suitability

Suitable with precautions

Rated to 45°C. Plan for a shaded or garage install through Perth summers.

Key warranty terms

•Depth of Discharge: 96% usable capacity
•Round-trip Efficiency: 96% rated
•Annual Degradation: ~2.5% per year expected
•Installation: Must be installed by SAA-accredited installer
•Operating Conditions: -10°C to 45°C

✗ Non-transferableFull replacement

Warranty Document Datasheet Compare Warranties

Full specifications

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Cell & chemistry

Chemistry: LFP
Cell type: null

Capacity & power

Nominal capacity: 9.6 kWh
Usable capacity: 9.1 kWh
Continuous power: 0 kW
Peak power: 0 kW
Depth of discharge: 96%
Round-trip efficiency: 96%
Nominal voltage: 96 V

Lifespan & degradation

Cycle life: 8000 cycles

Modularity & stacking

Modular / stackable: No
Maximum stack: 57.6 kWh

Backup & grid services

Backup capable: No
VPP ready: No

Physical

Dimensions (H×W×D): 730 × 590 × 205 mm
Weight: 86 kg
IP rating: IP65

Operating environment

Operating temperature: 0°C to 50°C

Documents

Download Datasheet Warranty Terms Installation Guide

Fault & error codes — NEOVOLT BW-BAT-9.6P

Extracted from the installation manual

15 documented

Showing 15 of 15. The official install manual is the authoritative source — always confirm before acting.

12criticalCall your installer
Manual (PDF)
SN missing
Likely cause
Serial number not detected
What to do
Call for service.
14criticalCall your installer
Manual (PDF)
Software version inconsistent
Likely cause
Firmware mismatch
What to do
Call for service.
15criticalCall your installer
Manual (PDF)
Total voltage fault
Likely cause
Inconsistent voltage reading from battery
What to do
Restart battery and if the problem is not resolved, call for service.
7criticalCall your installer
Manual (PDF)
Cell undervoltage
Likely cause
Voltage of one or more cells drops below safe levels
What to do
Stop discharging and call the service immediately.
1warning
Manual (PDF)
Temperature difference
Likely cause
Internal temperature regulation issue
What to do
Wait for automatic recovery. If the problem is not resolved, call the service center.
11warning
Manual (PDF)
LMU disconnect (slave)
Likely cause
Communication cable is disconnected
What to do
Reconnect the BMS communication cable.
13warning
Manual (PDF)
LMU disconnect (master)
Likely cause
Communication cable is disconnected
What to do
Reconnect the BMS communication cable.
2warning
Manual (PDF)
High temperature
Likely cause
Overheating during operation
What to do
Stop discharging and charging until this display status is eliminated and wait for the temperature to drop.
3warning
Manual (PDF)
Low temperature discharge
Likely cause
Ambient temperature too low for battery operation
What to do
Stop discharging until this display status is eliminated and wait for the temperature to rise.
4warning
Manual (PDF)
Overcurrent charge
Likely cause
Excessive current entering the battery
What to do
Wait for automatic recovery. If the problem is not resolved, call the service center.
5warning
Manual (PDF)
Overcurrent discharge
Likely cause
Excessive current leaving the battery
What to do
Wait for automatic recovery. If the problem is not resolved, call the service center.
6warning
Manual (PDF)
Cell overvoltage
Likely cause
Voltage of one or more cells exceeds safe levels
What to do
Wait for automatic recovery. If not resolved, call for service.
8warning
Manual (PDF)
Low temperature charge
Likely cause
Ambient temperature too low for battery charging
What to do
Stop charging until this display status is eliminated and wait for the temperature to rise.
9warning
Manual (PDF)
Hardware error
Likely cause
An issue with the battery hardware
What to do
Wait for automatic recovery. If the problem is not resolved, call the service center.
10info
Manual (PDF)
Circuit breaker open
Likely cause
Circuit breaker needs to be reset
What to do
Switch on the circuit breaker after powering off the battery.

WA Battery Scheme eligibility

Check eligibility

Synergy SSL inverter pairing, VPP participation and state-rebate qualification for this battery. Rebate and STC amounts are shown in the pricing panel.

CSIP-AUS compliant
Inverter must be CSIP-AUS compliant under the current WA framework.
Synergy SSL approved inverter
Needs pairing with a Synergy SSL approved inverter.
VPP activation ready
VPP activation requires a Synergy SSL approved inverter.
WA Battery Scheme rebate
Requires Battery Rewards participation under the current WA framework.
Synergy Battery Rewards
Requires a CSIP-AUS compliant system and reliable internet.
Interest-free loan
Not eligible for interest-free financing.

Under current WA rules, new rebate applications require VPP enrolment and CSIP-AUS compliance. How the scheme works · Estimate VPP earnings

Perth pricing

Typical installed price

$8,190

WA State RebateSubject to eligibility

Federal STCs-$2,434

After Rebates~$5,756

Prices are estimates. Final pricing depends on installation requirements. STC value is based on the current certificate price of about $39.9.

The WA Battery Scheme rebate (up to $1,300) requires a Synergy-approved (SSL) inverter and VPP enrolment — not all systems qualify, so it is not included above. Confirm eligibility with your installer.

Get matched with installers

Insufficient Data for Scoring

3 of 5 critical specs available (need 4)

Compare options

Compare this battery with other models to find the best fit for your needs.

Compare Products

How it compares

The NEOVOLT BW-BAT-9.6P I against the closest-sized batteries from other brands.

Specification	NEOVOLT BW-BAT-9.6P INEOVOLT	Each Energy M10Each Energy	Alpha ESS SMILE-BAT-10.1PAlpha ESS

Usable capacity?	9.1 kWh	9.12 kWhbest value	9.072 kWh
Continuous power?	0 kW	Not verified	Not verified
Peak power?	0 kW	Not verified	Not verified

Round-trip efficiency?	96%best value	92%	92%
Warranty	10 years	10 years	10 years
Chemistry	LFP	LFP	LFP

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Get quotes from Perth installers

Compare up to 3 quotes from SAA-accredited local installers. Free, no obligation, no pressure.

AI Home Energy Audit

Scan your home, get a professional assessment

Calculate savings with BillWise

See how this battery reduces your Synergy bill

Already have a quote? Check it

Free analysis against WA market rates