Loading Solar Battery Perth...

Product Information Disclaimer:

Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.

Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.

Back to all batteries

CEC approved: May 2026Report outdated info

JEESENG JEEDD-358100

Name: JEESENG JEEDD-358100
Brand: JEESENG

JEEDD series

CEC Approved

View datasheet (PDF)

Part of JEEDD — see all configurations

Usable capacity: 35.84 kWh
Continuous power: 15 kW
Peak power: 15 kW
Round-trip efficiency: 99%
Warranty: 15 yr
Chemistry: Lithium Iron Phosphate

Full specifications

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Cell & chemistry

Chemistry: Lithium Iron Phosphate
Cell type: LFP

Capacity & power

Nominal capacity: 35.84 kWh
Usable capacity: 35.84 kWh
Continuous power: 15 kW
Peak power: 15 kW
Depth of discharge: 100%
Round-trip efficiency: 98.5%
Nominal voltage: 358.4 V

Lifespan & degradation

Cycle life: 8000 cycles
Capacity retained at year 10: 80%
Warranted throughput: 0 MWh

Modularity & stacking

Modular / stackable: Yes
Maximum stack: 35.84 kWh

Backup & grid services

Backup capable: Yes
VPP ready: Yes

Physical

Dimensions (H×W×D): 2072 × 600 × 492 mm
Weight: 470 kg
IP rating: IP55

Operating environment

Operating temperature: -20°C to 60°C

Resources

Datasheet Warranty terms Installation guide

Warranty and support

Warranty terms and Australian support structure.

The warranty covers manufacturing defects and performance for 15 years. It excludes voiding conditions due to non-compliance with installation and environmental limits. Claims can be made through the specified process.

Duration

years

Throughput

∞

MWh

Max Temp

60°

celsius

Max Backup

Level 0

No Backup

Australian support structure

Not verified

We have not verified this brand's Australian support structure. Confirm warranty arrangements with the manufacturer or your installer.

Perth climate suitability

Suited to Perth climate

Rated to 60°C, which covers Perth's hottest days.

Key warranty terms

•Depth of Discharge: 100% usable capacity
•Round-trip Efficiency: 99% rated
•Annual Degradation: ~2.5% per year expected
•Installation: Must be installed by SAA-accredited installer
•Operating Conditions: -20°C to 60°C

✓ TransferableFull replacement≥80% capacity at year 10

Warranty Document Datasheet Compare Warranties

WA Battery Scheme eligibility

Check eligibility

Synergy SSL inverter pairing, VPP participation and state-rebate qualification for this battery. Rebate and STC amounts are shown in the pricing panel.

CSIP-AUS compliant
Inverter must be CSIP-AUS compliant under the current WA framework.
Synergy SSL approved inverter
Needs pairing with a Synergy SSL approved inverter.
VPP activation ready
VPP activation requires a Synergy SSL approved inverter.
WA Battery Scheme rebate
Requires Battery Rewards participation under the current WA framework.
Synergy Battery Rewards
Requires a CSIP-AUS compliant system and reliable internet.
Interest-free loan
Not eligible for interest-free financing.

Under current WA rules, new rebate applications require VPP enrolment and CSIP-AUS compliance. How the scheme works · Estimate VPP earnings

About JEESENG

View Full Profile →

Years in AU Market0+ years

Local SupportNot verified

CEC-Listed Products5 models

AU Listed

Listed on CEC Approved Products Register

0 years in the Australian market

Fault & error codes — JEESENG JEEDD

Extracted from the installation manual

11 documented

Showing 11 of 11. The official install manual is the authoritative source — always confirm before acting.

I156-2HcriticalCall your installer
Manual (PDF)
System/single cell over-voltage shutdown protection
Likely cause
1. System/single cell overvoltage 2. Battery sampling cables disconnected or sampling cables plug connection unreliable 3. BMU abnormal
What to do
Re-plug the power plug of the battery sampling, check the system battery voltage, replace battery cells if battery cells are abnormal.
I156-3HcriticalCall your installer
Manual (PDF)
System/Single Cell Under-voltage Shutdown Protection
Likely cause
1. System/single cell undervoltage 2. Battery sampling cables short-circuited or sampling cables plug connection unreliable 3. BMU abnormal 4. Other reasons
What to do
Re-plug the power plug of the battery sampling, check the system battery voltage, replace battery cells if battery cells are abnormal.
I156-5HcriticalCall your installer
Manual (PDF)
Charging/Discharging under-temperature shutdown protection
Likely cause
1. System battery temperature is lower than the low-protected value 2. Temperature sampling cables disconnected or sampling cables plug unreliable 3. BMU abnormal 4. Other reasons
What to do
Re-plug the power plug of the battery sampling, check if the air conditioning is operating normally, and if not, please contact the manufacturer's after-sales service.
I156-7HcriticalCall your installer
Manual (PDF)
System insulation failure
Likely cause
1. System insulation detection failure 2. Electric leakage
What to do
Apply remote backend to shut down PCS, disconnect DC switches, and contact the manufacturer's after-sales service.
I156-9HcriticalCall your installer
Manual (PDF)
BMS and PCS Communication Failure
Likely cause
1. BMS not powered 2. PCS not powered 3. Corresponding communication cable loose
What to do
Check if the whole BESS is powered properly, inspect if the corresponding BMS and PCS communication plug is loose, and if the cable is damaged.
I156-10HwarningCall your installer
Manual (PDF)
AIR conditioning and BMS Communication Failure
Likely cause
1. BESS not powered 2. Corresponding communication cable loose
What to do
Check if the whole BESS is powered properly, inspect if the corresponding communication plug is loose, and if the cable is damaged.
I156-1HwarningCall your installer
Manual (PDF)
System cannot start normally
Likely cause
1. Secondary circuit of the system is not powered 2. Some switches are not closed 3. Other reasons
What to do
Check if the monitoring power indicator light is on, refer to the electrical diagram to see if some switches are not closed. If still does not work, please contact the manufacturer for after-sales service.
I156-4HwarningCall your installer
Manual (PDF)
Charging/Discharging over-temperature shutdown protection
Likely cause
1. System battery temperature is higher than the high-protected value 2. Temperature sampling cables disconnected or sampling cables plug unreliable 3. BMU abnormal 4. Other reasons
What to do
Re-plug the power plug of the battery sampling, check if the air conditioning is operating normally, and if not, please contact the manufacturer's after-sales service.
I156-6HwarningCall your installer
Manual (PDF)
Charging/Discharging over-current shutdown protection
Likely cause
Charging/Discharging current is higher than the protected current
What to do
Check if the PCS is operating normally, if not, please contact the manufacturer's after-sales service.
I156-8HwarningCall your installer
Manual (PDF)
BCU and BMU Communication Failure
Likely cause
1. BMS not powered 2. Corresponding communication cable loose
What to do
Check if the BMS system is powered properly, inspect if the corresponding BCU and BMU communication plug is loose, and if the cable is damaged.
I156-11Hinfo
Manual (PDF)
SOC value abnormal
Likely cause
1. SOC value not calibrated 2. SOC accumulation error
What to do
Perform a complete charging and discharging cycle.

Perth pricing

Typical installed price

$32,256

WA State RebateSubject to eligibility

Federal STCs-$6,384

After Rebates~$25,872

Prices are estimates. Final pricing depends on installation requirements. STC value is based on the current certificate price of about $39.9.

The WA Battery Scheme rebate (up to $1,300) requires a Synergy-approved (SSL) inverter and VPP enrolment — not all systems qualify, so it is not included above. Confirm eligibility with your installer.

Explore your options

Insufficient Data for Scoring

3 of 5 critical specs available (need 4)

Part of the JEESENG JEEDD

See all configurations in this series →

Compare options

Compare this battery with other models to find the best fit for your needs.

Compare Products

How it compares

The JEESENG JEEDD-358100 against the closest-sized batteries from other brands.

Specification	JEESENG JEEDD-358100JEESENG	Deye BOS-G35Deye	Deye BOS-G35-ProDeye

Usable capacity?	35.84 kWh	35.84 kWh	35.84 kWh
Continuous power?	15 kW	Not verified	Not verified
Peak power?	15 kW	Not verified	Not verified

Round-trip efficiency?	99%best value	92%	92%
Warranty	15 yearsbest value	10 years	10 years
Chemistry	Lithium Iron Phosphate	LFP	LFP

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Want to take the next step?

Compare quotes from SAA-accredited local installers — you choose which to act on. No obligation, no pressure.

Get quotes on this battery

Free, no-obligation quotes from WA installers

Not sure this is the right size?

Answer a few questions to shortlist batteries

Already have a quote? Check it

Free analysis against WA market rates