Loading Solar Battery Perth...

Product Information Disclaimer:

Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.

Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.

Back to all batteries

CEC approved: May 2025Report outdated info

HYXi POWER HYX-E200-H

Name: HYXi POWER HYX-E200-H
Brand: HYXi POWER

High Voltage Battery series

CEC Approved

View datasheet (PDF)

Part of High Voltage Battery — see all configurations

Usable capacity: 18 kWh
Continuous power: 12 kW
Peak power: 12 kW
Round-trip efficiency: 95%
Warranty: 15 yr
Chemistry: LFP

Full specifications

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Cell & chemistry

Chemistry: LFP
Cell type: LFP

Capacity & power

Nominal capacity: 21.2 kWh
Usable capacity: 18 kWh
Continuous power: 12 kW
Peak power: 12 kW
Depth of discharge: 15%
Round-trip efficiency: 95%
Nominal voltage: 409.6 V

Lifespan & degradation

Cycle life: 6000 cycles
Capacity retained at year 10: 70%
Warranted throughput: 72.9 MWh

Modularity & stacking

Modular / stackable: Yes
Maximum stack: 21.2 kWh

Backup & grid services

Backup capable: Yes
VPP ready: Yes

Physical

Dimensions (H×W×D): 1650 × 700 × 200 mm
Weight: 215 kg
IP rating: IP65

Operating environment

Operating temperature: 0°C to 50°C

Resources

Datasheet Warranty terms Installation guide

Warranty and support

Warranty terms and Australian support structure.

Hyxi offers up to 25 years warranty for their solar products, covering defects under normal use. Key exclusions include unauthorized modifications and improper installations. Claims must be reported within 14 days of damage.

Duration

years

Throughput

72.9

MWh

Max Temp

50°

celsius

Max Backup

Level 0

No Backup

Australian support structure

Not verified

We have not verified this brand's Australian support structure. Confirm warranty arrangements with the manufacturer or your installer.

Perth climate suitability

Suited to Perth climate

Rated to 50°C, which covers Perth's hottest days.

Key warranty terms

•Depth of Discharge: 15% usable capacity
•Round-trip Efficiency: 95% rated
•Annual Degradation: ~2.5% per year expected
•Installation: Must be installed by SAA-accredited installer
•Operating Conditions: 0°C to 50°C

✓ TransferableFull replacement≥70% capacity at year 10

Warranty Document Datasheet Compare Warranties

WA Battery Scheme eligibility

Check eligibility

Synergy SSL inverter pairing, VPP participation and state-rebate qualification for this battery. Rebate and STC amounts are shown in the pricing panel.

CSIP-AUS compliant
Inverter must be CSIP-AUS compliant under the current WA framework.
Synergy SSL approved inverter
Needs pairing with a Synergy SSL approved inverter.
VPP activation ready
VPP activation requires a Synergy SSL approved inverter.
WA Battery Scheme rebate
Requires Battery Rewards participation under the current WA framework.
Synergy Battery Rewards
Requires a CSIP-AUS compliant system and reliable internet.
Interest-free loan
Not eligible for interest-free financing.

Under current WA rules, new rebate applications require VPP enrolment and CSIP-AUS compliance. How the scheme works · Estimate VPP earnings

About HYXi POWER

View Full Profile →

Years in AU Market1+ years

Local SupportNot verified

CEC-Listed Products4 models

1yr AU

CEC-approved products since 2025

1 year in the Australian market

Fault & error codes — HYXi POWER High Voltage Battery

Extracted from the installation manual

16 documented

Showing 16 of 16. The official install manual is the authoritative source — always confirm before acting.

Battery charging high temperaturecriticalCall your installer
Manual (PDF)
The battery is overheating during charging.
Likely cause
Environmental issues or malfunctioning charger.
What to do
Wait for battery to cool down and contact Hyxi.
Battery charging over-voltagecriticalCall your installer
Manual (PDF)
The battery is receiving a voltage higher than its maximum.
Likely cause
Charger output is above the battery's tolerance.
What to do
Restart the device and contact Hyxi after-sales staff.
Battery charging overcurrentcriticalCall your installer
Manual (PDF)
The battery is being charged with too much current, which could damage it.
Likely cause
Excessive input current from the charger.
What to do
Restart the device and contact Hyxi after-sales staff.
Battery discharge high temperaturecriticalCall your installer
Manual (PDF)
The battery is overheating during discharge.
Likely cause
Excessive load or environmental issues.
What to do
Turn off the load and wait for temperature to drop, contact Hyxi.
Battery discharge overcurrentcriticalCall your installer
Manual (PDF)
The battery is discharging too much current, which could damage it.
Likely cause
Excessive load on the battery.
What to do
Reduce the load and restart the device.
Battery discharge undervoltagecriticalCall your installer
Manual (PDF)
The battery voltage is below acceptable limits for discharging.
Likely cause
Low battery energy levels.
What to do
Restart the device and contact Hyxi after-sales staff.
Battery pack communication lostcriticalCall your installer
Manual (PDF)
Communication with one of the battery packs is lost.
Likely cause
Loose connections or damaged cables.
What to do
Check connections and contact Hyxi after-sales staff.
Battery temperature detection sensor failurecriticalCall your installer
Manual (PDF)
The sensor detecting battery temperature has failed.
Likely cause
Sensor malfunction.
What to do
Restart the device and contact Hyxi after-sales staff.
BDU main positive relay failurecriticalCall your installer
Manual (PDF)
The main relay in the BDU has failed.
Likely cause
Equipment malfunction.
What to do
Contact Hyxi after-sales staff.
BDU overtemperaturecriticalCall your installer
Manual (PDF)
The Battery Distribution Unit is overheating.
Likely cause
Excessive load or poor ventilation.
What to do
Wait for BDU temperature to drop below 70°C and contact Hyxi.
Cell voltage sampling line failurecriticalCall your installer
Manual (PDF)
There is a fault with the voltage sampling lines of the battery cells.
Likely cause
Wiring issues or sensor malfunction.
What to do
Restart the device and contact Hyxi after-sales staff.
Loss of communication with PCScriticalCall your installer
Manual (PDF)
Communication with the Power Control System is lost.
Likely cause
Connection issues between BDU and PCS.
What to do
Check connections and contact Hyxi after-sales staff.
Low insulation resistance of BDUcriticalCall your installer
Manual (PDF)
The insulation resistance of the BDU is too low, posing safety risks.
Likely cause
Damaged insulation or external moisture.
What to do
Restart the device and contact Hyxi after-sales staff.
Battery discharging low temperaturewarningCall your installer
Manual (PDF)
The battery is too cold to discharge properly.
Likely cause
Low environmental temperatures.
What to do
Allow the battery to warm up above 2°C and contact Hyxi.
Excessive battery temperature differencewarningCall your installer
Manual (PDF)
There is a significant temperature difference between battery cells.
Likely cause
Improper cooling or heating conditions.
What to do
Wait for temperature difference to be within acceptable limits, contact Hyxi.
Pre-charge faultwarningCall your installer
Manual (PDF)
There is an issue with the pre-charge process.
Likely cause
Improper device startup procedure.
What to do
Restart the device and contact Hyxi after-sales staff.

Perth pricing

Typical installed price

$16,200

WA State RebateSubject to eligibility

Federal STCs-$4,429

After Rebates~$11,771

Prices are estimates. Final pricing depends on installation requirements. STC value is based on the current certificate price of about $39.9.

The WA Battery Scheme rebate (up to $1,300) requires a Synergy-approved (SSL) inverter and VPP enrolment — not all systems qualify, so it is not included above. Confirm eligibility with your installer.

Explore your options

Insufficient Data for Scoring

3 of 5 critical specs available (need 4)

Part of the HYXi POWER High Voltage Battery

See all configurations in this series →

Compare options

Compare this battery with other models to find the best fit for your needs.

Compare Products

How it compares

The HYXi POWER HYX-E200-H against the closest-sized batteries from other brands.

Specification	HYXi POWER HYX-E200-HHYXi POWER	Freedom Won Freedom Won LiTE Home 20/16 52VFreedom Won	GCL Honror ES RY-20-S1GCL

Usable capacity?	18 kWh	18 kWh	18 kWh
Continuous power?	12 kW	Not verified	Not verified
Peak power?	12 kW	Not verified	Not verified

Round-trip efficiency?	95%best value	92%	92%
Warranty	15 yearsbest value	10 years	10 years
Chemistry	LFP	LFP	LFP

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Want to take the next step?

Compare quotes from SAA-accredited local installers — you choose which to act on. No obligation, no pressure.

Get quotes on this battery

Free, no-obligation quotes from WA installers

Not sure this is the right size?

Answer a few questions to shortlist batteries

Already have a quote? Check it

Free analysis against WA market rates