Loading Solar Battery Perth...

Product Information Disclaimer:

Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.

Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.

Back to all batteries

CEC approved: July 2025Report outdated info

hinen B8900M-HC

26.956kWh series

CEC Approved

Usable capacity: 24.26 kWh
Power: 26.96 kW
Warranty: 10 yr
Chemistry: LFP (LiFePO4)

About hinen

Years in AU Market2+ years

Local SupportNot verified

CEC-Listed Products29 models

2yr AU

CEC-approved products since 2024

2 years in the Australian market

Warranty and support

Warranty terms and Australian support structure.

This product is covered by a 10-year warranty, which covers defects in materials and workmanship. The warranty does not cover damage due to improper installation or unauthorized modifications.

Duration

years

Throughput

Max Temp

celsius

Max Backup

Level 0

No Backup

Australian support structure

Not verified

We have not verified this brand's Australian support structure. Confirm warranty arrangements with the manufacturer or your installer.

Perth climate suitability

Suitable with precautions

Rated to 45°C. Plan for a shaded or garage install through Perth summers.

Key warranty terms

•Depth of Discharge: 90% usable capacity
•Round-trip Efficiency: 90% rated
•Annual Degradation: ~2.5% per year expected
•Installation: Must be installed by SAA-accredited installer
•Operating Conditions: -10°C to 45°C

✓ TransferableFull replacement

Warranty Document Datasheet Compare Warranties

Full specifications

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Cell & chemistry

Chemistry: LFP (LiFePO4)
Cell type: LFP

Capacity & power

Nominal capacity: 26.96 kWh
Usable capacity: 24.26 kWh
Continuous power: 26.96 kW
Peak power: 26.96 kW
Depth of discharge: 90%
Round-trip efficiency: 90%
Nominal voltage: 518.4 V

Lifespan & degradation

Cycle life: 8000 cycles

Modularity & stacking

Modular / stackable: Yes
Maximum stack: 160.2 kWh

Backup & grid services

Backup capable: Yes
VPP ready: Yes

Physical

Dimensions (H×W×D): 730 × 1730 × 180 mm
Weight: 269 kg
IP rating: IP65

Operating environment

Operating temperature: 0°C to 55°C

Documents

Download Datasheet Warranty Terms Installation Guide

Fault & error codes — hinen 26.956kWh

Extracted from the installation manual

21 documented

Showing 21 of 21. The official install manual is the authoritative source — always confirm before acting.

Error 600criticalCall your installer
Manual (PDF)
Voltage sensor failure
Likely cause
Faulty voltage sensor
What to do
Restart the battery. If the fault message persists, contact the manufacturer.
Error 601criticalCall your installer
Manual (PDF)
Temperature sensor failure
Likely cause
Faulty temperature sensor
What to do
Restart the battery. If the fault message persists, contact the manufacturer.
Error 602criticalCall your installer
Manual (PDF)
Internal communication failure
Likely cause
Communication issue within the system
What to do
Restart the battery. If the fault message persists, contact the manufacturer.
Error 603criticalCall your installer
Manual (PDF)
Input overvoltage fault
Likely cause
Voltage supply exceeds the limit
What to do
Check the input source and remove it. If the fault message persists, contact the manufacturer.
Error 604criticalCall your installer
Manual (PDF)
Input reverse fault
Likely cause
Incorrect connection of input terminals
What to do
Check the input source and remove it. If the fault message persists, contact the manufacturer.
Error 605criticalCall your installer
Manual (PDF)
Relay detection failure
Likely cause
Failed relay mechanism
What to do
Restart the battery. If the fault message persists, contact the manufacturer.
Error 606criticalCall your installer
Manual (PDF)
Battery damage failure
Likely cause
Physical damage to battery
What to do
Restart the battery. If the fault message persists, contact the manufacturer.
Error 607criticalCall your installer
Manual (PDF)
Other faults
Likely cause
Undefined error state
What to do
Restart the battery. If the fault message persists, contact the manufacturer.
Error 608criticalCall your installer
Manual (PDF)
Battery cell low voltage protection
Likely cause
Battery voltage is lower than safe limit
What to do
Charge the battery. If the fault message persists, contact the manufacturer.
Error 609criticalCall your installer
Manual (PDF)
Battery cell hazardous voltage protection
Likely cause
Battery voltage exceeds safe limit
What to do
Discharge the battery. If the fault message persists, contact the manufacturer.
Error 610criticalCall your installer
Manual (PDF)
Battery pack discharge low voltage protection
Likely cause
Discharge voltage too low
What to do
Charge the battery. If the fault message persists, contact the manufacturer.
Error 611criticalCall your installer
Manual (PDF)
Battery pack charging hazardous voltage protection
Likely cause
Charging voltage exceeds limit
What to do
Discharge the battery. If the fault message persists, contact the manufacturer.
Error 616criticalCall your installer
Manual (PDF)
Battery pack charging overcurrent protection
Likely cause
Charging current exceeds limit
What to do
Remove the overcurrent source. If the fault message persists, contact the manufacturer.
Error 617criticalCall your installer
Manual (PDF)
Battery pack discharge overcurrent protection
Likely cause
Discharge current exceeds limit
What to do
Remove the overcurrent source. If the fault message persists, contact the manufacturer.
Error 618criticalCall your installer
Manual (PDF)
Battery module undervoltage protection
Likely cause
Voltage in the module is too low
What to do
Charge the battery. If the fault message persists, contact the manufacturer.
Error 619criticalCall your installer
Manual (PDF)
Battery module overvoltage protection
Likely cause
Voltage in the module is too high
What to do
Discharge the battery. If the fault message persists, contact the manufacturer.
Error 620criticalCall your installer
Manual (PDF)
Battery cell secondary undervoltage protection
Likely cause
Voltage in the secondary cell is too low
What to do
Charge the battery. If the fault message persists, contact the manufacturer.
Error 612warning
Manual (PDF)
Charging low temperature protection
Likely cause
Battery too cold for charging
What to do
Return to normal temperature before using. If the fault message persists, contact the manufacturer.
Error 613warning
Manual (PDF)
Charging high temperature protection
Likely cause
Battery too hot for charging
What to do
Return to normal temperature before using. If the fault message persists, contact the manufacturer.
Error 614warning
Manual (PDF)
Discharge low temperature protection
Likely cause
Battery too cold for discharging
What to do
Return to normal temperature before using. If the fault message persists, contact the manufacturer.
Error 615warning
Manual (PDF)
Discharge high temperature protection
Likely cause
Battery too hot for discharging
What to do
Return to normal temperature before using. If the fault message persists, contact the manufacturer.

WA Battery Scheme eligibility

Check eligibility

Synergy SSL inverter pairing, VPP participation and state-rebate qualification for this battery. Rebate and STC amounts are shown in the pricing panel.

CSIP-AUS compliant
Inverter must be CSIP-AUS compliant under the current WA framework.
Synergy SSL approved inverter
Needs pairing with a Synergy SSL approved inverter.
VPP activation ready
VPP activation requires a Synergy SSL approved inverter.
WA Battery Scheme rebate
Requires Battery Rewards participation under the current WA framework.
Synergy Battery Rewards
Requires a CSIP-AUS compliant system and reliable internet.
Interest-free loan
Not eligible for interest-free financing.

Under current WA rules, new rebate applications require VPP enrolment and CSIP-AUS compliance. How the scheme works · Estimate VPP earnings

Perth pricing

Typical installed price

$23,047

WA State RebateSubject to eligibility

Federal STCs-$5,466

After Rebates~$17,581

Prices are estimates. Final pricing depends on installation requirements. STC value is based on the current certificate price of about $39.9.

The WA Battery Scheme rebate (up to $1,300) requires a Synergy-approved (SSL) inverter and VPP enrolment — not all systems qualify, so it is not included above. Confirm eligibility with your installer.

Get matched with installers

Insufficient Data for Scoring

3 of 5 critical specs available (need 4)

Compare options

Compare this battery with other models to find the best fit for your needs.

Compare Products

How it compares

The hinen B8900M-HC against the closest-sized batteries from other brands.

Specification	hinen B8900M-HChinen	Dyness STACK100-5SDyness	ESY ESYSUNHOME 25KWH+ESY

Usable capacity?	24.26 kWh	24.32 kWhbest value	24.32 kWhbest value
Continuous power?	26.96 kW	Not verified	Not verified
Peak power?	26.96 kW	Not verified	Not verified

Round-trip efficiency?	90%	92%best value	92%best value
Warranty	10 years	10 years	10 years
Chemistry	LFP (LiFePO4)	LFP	LFP

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Get quotes from Perth installers

Compare up to 3 quotes from SAA-accredited local installers. Free, no obligation, no pressure.

AI Home Energy Audit

Scan your home, get a professional assessment

Calculate savings with BillWise

See how this battery reduces your Synergy bill

Already have a quote? Check it

Free analysis against WA market rates