Loading Solar Battery Perth...

Home battery · Ambrion · CEC approved October 2023

Ambrion HS2-6K-S2-3 4G

CEC listing: HS2-6K-S2-3 4G (AS4777-2 2020)

A 14.25 kWh home battery — smaller home size, the 10–15 kWh band.

Installed in Perth, after rebates: ~$8,995; Typical estimate — your own quote will vary
WA Battery Scheme rebate: Depends on your inverter; The scheme needs a Synergy-approved inverter — we don't know yours
Usable capacity: 14.25kWh; Smaller home size — the 10–15 kWh band

What we can tell you

Read from the figures on this page. No review written yet.

14.25 kWh sits in the smaller home band (10–15 kWh).
It is CEC-approved, which is a condition of both the federal STC discount and the WA Battery Scheme.
We can't score it: a value score needs a price and full specs, and without them any number would be guesswork.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Usable capacity How much energy it stores for you to use: 14.25kWh
Round-trip efficiency How much of the energy you store comes back out: 98%
Depth of discharge How much of the battery you can actually use: 90%
Warranty 80% of capacity guaranteed at the end of it: 10yr
Battery chemistry Lithium iron phosphate — the long-cycle-life type: LFP

Full datasheet

Every figure on file for the Ambrion HS2, by section.

Full datasheet, by section
Specification	Value
Cell & chemistry
Chemistry	LFP
Capacity & power
Nominal capacity	15 kWh
Usable capacity	14.25 kWh
Round-trip efficiency	97.6%
Lifespan & degradation
Capacity retained at year 10	80%
Warranted throughput	50 MWh
Physical
IP rating	IP65
Operating environment
Operating temperature	45°C to 60°C

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Documents

Warranty and support

Warranty terms and Australian support structure.

This warranty covers defects for 10 years. It does not cover damages from improper installation or alterations. To claim, contact support.

Duration

years

Throughput

MWh

Max Temp

60°

celsius

Max Backup

Level 0

No Backup

Australian support structure

Not verified

We have not verified this brand's Australian support structure. Confirm warranty arrangements with the manufacturer or your installer.

Perth heat

Rated to 60°C, which covers Perth's hottest days.

Key warranty terms

•Depth of Discharge: 90% usable capacity
•Round-trip Efficiency: 98% rated
•Annual Degradation: ~2.5% per year expected
•Installation: Must be installed by SAA-accredited installer
•Operating Conditions: 45°C to 60°C

✓ TransferableFull replacement≥80% capacity at year 10

Warranty Document Datasheet Compare Warranties

WA Battery Scheme eligibility

Conditional

Synergy SSL inverter pairing, VPP participation and state-rebate qualification for this battery. Rebate and STC amounts are shown in the pricing panel.

This battery is AC-coupled. To get the WA rebate, the interest-free loan, VPP payments or DEBS export credits, it needs a gateway device from Synergy's approved list (for example SMA or Redback), or an inverter and battery from the same brand (Sungrow or Fronius). Without one, exports are capped at 1.5kW.

Some third-party gateways struggle to pass compliance testing, and adding anything to an AC-coupled system later means the whole system has to be re-checked. For many homes, switching to a hybrid (DC-coupled) inverter is the simpler path. AC vs DC coupling

CSIP-AUS compliant
Inverter must be CSIP-AUS compliant under the current WA framework.
Synergy SSL approved inverter
Needs pairing with a Synergy SSL approved inverter.
VPP activation ready
VPP activation requires a Synergy SSL approved inverter.
WA Battery Scheme rebate
Requires Battery Rewards participation under the current WA framework.
Synergy Battery Rewards
Requires a CSIP-AUS compliant system and reliable internet.
Interest-free loan
Not eligible for interest-free financing.

Under current WA rules, new rebate applications require VPP enrolment and CSIP-AUS compliance. How the scheme works · Estimate VPP earnings

About AMBRION

View Full Profile →

Years in AU Market4+ years

Local SupportNot verified

CEC-Listed Products60 models

4yr AU

CEC-approved products since 2022

4 years in the Australian market

Fault & error codes — Ambrion HS2

Extracted from the installation manual

34 documented

Showing 34 of 34. The official install manual is the authoritative source — always confirm before acting.

1criticalCall your installer
Manual (PDF)
Master Relay Error
Likely cause
Faulty relay connection or malfunction.
What to do
Reset the inverter. If the error persists, contact the installer.
10criticalCall your installer
Manual (PDF)
Master Phase1 Voltage Low
Likely cause
Voltage below acceptable limit on phase 1.
What to do
Check the grid and surroundings and contact an electrician if needed.
11criticalCall your installer
Manual (PDF)
Master Phase2 Voltage High
Likely cause
Voltage exceeds acceptable limit on phase 2.
What to do
Check the grid voltage level and contact your installer if issues persist.
12criticalCall your installer
Manual (PDF)
Master Phase2 Voltage Low
Likely cause
Voltage below acceptable limit on phase 2.
What to do
Check the grid and surroundings and contact an electrician if needed.
13criticalCall your installer
Manual (PDF)
Master Phase3 Voltage High
Likely cause
Voltage exceeds acceptable limit on phase 3.
What to do
Check the grid voltage level and contact your installer if issues persist.
14criticalCall your installer
Manual (PDF)
Master Phase3 Voltage Low
Likely cause
Voltage below acceptable limit on phase 3.
What to do
Check the grid and surroundings and contact an electrician if needed.
15criticalCall your installer
Manual (PDF)
Grid Voltage 10Min High
Likely cause
High grid voltage duration exceeds 10 minutes.
What to do
Monitor voltage and contact your installer if it continues.
17criticalCall your installer
Manual (PDF)
OffGrid Output Short Circuit
Likely cause
Short circuit detected during off-grid operation.
What to do
Disconnect load and check for short circuits.
2criticalCall your installer
Manual (PDF)
Master EEPROM Error
Likely cause
EEPROM failure or corruption.
What to do
Power cycle the inverter. If the error does not clear, call for professional assistance.
21criticalCall your installer
Manual (PDF)
Phase1 DCV High
Likely cause
Direct current voltage on phase 1 exceeds limits.
What to do
Check voltages and reduce loads if necessary.
22criticalCall your installer
Manual (PDF)
Phase2 DCV High
Likely cause
Direct current voltage on phase 2 exceeds limits.
What to do
Check voltages and reduce loads if necessary.
23criticalCall your installer
Manual (PDF)
Phase3 DCV High
Likely cause
Direct current voltage on phase 3 exceeds limits.
What to do
Check voltages and reduce loads if necessary.
24criticalCall your installer
Manual (PDF)
Master No Grid Error
Likely cause
Grid connection lost or unstable.
What to do
Check grid connection and restart the system.
25criticalCall your installer
Manual (PDF)
DC ReverseConnect Error
Likely cause
Reverse connection of DC input detected.
What to do
Disconnect and check polarity before reconnecting.
27criticalCall your installer
Manual (PDF)
GFCI Error
Likely cause
Ground Fault Circuit Interrupter has detected a fault.
What to do
Reset GFCI and check wiring.
3critical
Manual (PDF)
Master Temperature High Error
Likely cause
Overheating of the master unit.
What to do
Turn off the unit and allow it to cool. Check ventilation before restarting.
31criticalCall your installer
Manual (PDF)
ISO Error
Likely cause
Insulation fault detected in the system.
What to do
Disconnect and inspect for insulation failures.
8criticalCall your installer
Manual (PDF)
Current Sensor Error
Likely cause
Sensor malfunction or disconnection.
What to do
Inspect sensor connections and replace if faulty.
9criticalCall your installer
Manual (PDF)
Master Phase1 Voltage High
Likely cause
Voltage exceeds acceptable limit on phase 1.
What to do
Check the grid voltage level and contact your installer if issues persist.
16warning
Manual (PDF)
OffGrid Output Voltage Low
Likely cause
Output voltage is below threshold when operating off-grid.
What to do
Check load and restart the system.
18warning
Manual (PDF)
Master Grid Frequency High
Likely cause
Grid frequency exceeds safe operational limits.
What to do
Reduce load and wait for frequency to return to normal.
19warning
Manual (PDF)
Master Grid Frequency Low
Likely cause
Grid frequency falls below safe operational limits.
What to do
Increase load and wait for frequency to return to normal.
20warningCall your installer
Manual (PDF)
BATInputMode Error
Likely cause
Input mode error in battery configuration.
What to do
Check battery connections and input modes.
26warningCall your installer
Manual (PDF)
Parallel machine CAN Com Error
Likely cause
Communication failure in parallel machine setup.
What to do
Check CAN connection and restart units.
28warningCall your installer
Manual (PDF)
Phase1 DCI Error
Likely cause
Current input issue on phase 1.
What to do
Inspect current sensor for faults.
29warningCall your installer
Manual (PDF)
Phase2 DCI Error
Likely cause
Current input issue on phase 2.
What to do
Inspect current sensor for faults.
30warningCall your installer
Manual (PDF)
Phase3 DCI Error
Likely cause
Current input issue on phase 3.
What to do
Inspect current sensor for faults.
32warning
Manual (PDF)
Bus Voltage Balance Error
Likely cause
Imbalance detected in bus voltage levels.
What to do
Power cycle the system and monitor voltage balance.
33warning
Manual (PDF)
Master Bus Voltage High
Likely cause
Bus voltage exceeds allowable limit.
What to do
Reduce load and check voltage outputs.
34warning
Manual (PDF)
Master Bus Voltage Low
Likely cause
Bus voltage below safe levels.
What to do
Check connections and increase load if necessary.
4warning
Manual (PDF)
Master Temperature Low Error
Likely cause
Temperature below operating range.
What to do
Warm up the unit to normal operating temperature before restarting.
5warningCall your installer
Manual (PDF)
Lost Communication M<->S
Likely cause
Communication failure between master and slave units.
What to do
Check connections and reboot the inverter.
6warningCall your installer
Manual (PDF)
GFCI Device Error
Likely cause
Ground Fault Circuit Interrupter malfunction.
What to do
Reset the GFCI. If the issue continues, consult an electrician.
7warning
Manual (PDF)
DCI Device Error
Likely cause
Error in the direct current input.
What to do
Inspect DC circuit for faults and restart the system.

What it costs in Perth

$12,825

Typical installed price, before rebates

WA Battery Scheme: Depends on your inverter
Federal STCs: −$3,830
You’d pay about: $8,995

The WA Battery Scheme (up to $1,300) needs a Synergy-approved inverter and VPP enrolment. We don't know which inverter you'd pair this with, so it isn't deducted above — ask your installer. STCs assume about $39.9 a certificate. Estimates only; your quote will vary.

Explore your options

Which size band is your home?

Usable capacity, for one battery system

Smaller home: 10–15 kWh
Medium home: 20–30 kWh
Big home: 30–40 kWh
Very big home: 40+ kWh

This battery is one unit in the smaller home band. The WA rebate caps at 10 kWh, but that is a rebate limit, not a sizing guide.

Does waiting change the rebate?

Estimated federal rebate (STCs) for this 14.25 kWh battery

How it compares

The Ambrion HS2-6K-S2-3 4G against the closest-sized batteries from other brands.

Specification	Ambrion HS2-6K-S2-3 4GAmbrion	Jeeseng JEEDD-153100Jeeseng	Red Earth Energy Storage SRS-318Red Earth Energy Storage

Usable capacity?	14.25 kWh	14.28 kWhbest value	14.2 kWh
Continuous power?	Not verified	Not verified	Not verified
Peak power?	Not verified	Not verified	Not verified

Round-trip efficiency?	98%best value	92%	92%
Warranty	10 years	Not verified	Not verified
Chemistry	LFP	LFP	LFP

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

More from AMBRION

Other CEC-approved products from AMBRION available in Australia.

AMBRION Inverters

AS1-3KS-10.2 (AS4777-2 2020)

3 kW · 1φ

AS1-3KS-15.3 (AS4777-2 2020)

3 kW · 1φ

AS1-3KS-20.4 (AS4777-2 2020)

3 kW · 1φ

AS1-3KS-5.1 (AS4777-2 2020)

3 kW · 1φ

AS3-10K-T-W-P10-AUS (AS4777-2 2020)

10 kW · 3φ

AS3-10K-T-W-P2-AUS (AS4777-2 2020)

10 kW · 3φ

View all AMBRION inverters

View full AMBRION manufacturer profile

Want to take the next step?

Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.

This model is one entry in the desk's index of solar batteries for Perth — every CEC-approved battery on one comparable dataset.

Product Information Disclaimer:

Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.

Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.

Home battery · Ambrion · CEC approved October 2023

Ambrion HS2-6K-S2-3 4G

CEC listing: HS2-6K-S2-3 4G (AS4777-2 2020)

A 14.25 kWh home battery — smaller home size, the 10–15 kWh band.

Installed in Perth, after rebates: ~$8,995; Typical estimate — your own quote will vary
WA Battery Scheme rebate: Depends on your inverter; The scheme needs a Synergy-approved inverter — we don't know yours
Usable capacity: 14.25kWh; Smaller home size — the 10–15 kWh band

Datasheet (PDF)See the whole HS2 series

Spotted something outdated?

What we can tell you

Read from the figures on this page. No review written yet.

14.25 kWh sits in the smaller home band (10–15 kWh).
It is CEC-approved, which is a condition of both the federal STC discount and the WA Battery Scheme.
We can't score it: a value score needs a price and full specs, and without them any number would be guesswork.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Usable capacity How much energy it stores for you to use: 14.25kWh
Round-trip efficiency How much of the energy you store comes back out: 98%
Depth of discharge How much of the battery you can actually use: 90%
Warranty 80% of capacity guaranteed at the end of it: 10yr
Battery chemistry Lithium iron phosphate — the long-cycle-life type: LFP

Full datasheet

Every figure on file for the Ambrion HS2, by section.

Full datasheet, by section
Specification	Value
Cell & chemistry
Chemistry	LFP
Capacity & power
Nominal capacity	15 kWh
Usable capacity	14.25 kWh
Round-trip efficiency	97.6%
Lifespan & degradation
Capacity retained at year 10	80%
Warranted throughput	50 MWh
Physical
IP rating	IP65
Operating environment
Operating temperature	45°C to 60°C

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Documents

Warranty and support

Warranty terms and Australian support structure.

This warranty covers defects for 10 years. It does not cover damages from improper installation or alterations. To claim, contact support.

Duration

years

Throughput

MWh

Max Temp

60°

celsius

Max Backup

Level 0

No Backup

Australian support structure

Not verified

We have not verified this brand's Australian support structure. Confirm warranty arrangements with the manufacturer or your installer.

Perth heat

Rated to 60°C, which covers Perth's hottest days.

Key warranty terms

•Depth of Discharge: 90% usable capacity
•Round-trip Efficiency: 98% rated
•Annual Degradation: ~2.5% per year expected
•Installation: Must be installed by SAA-accredited installer
•Operating Conditions: 45°C to 60°C

✓ TransferableFull replacement≥80% capacity at year 10

Warranty Document Datasheet Compare Warranties

WA Battery Scheme eligibility

Conditional

Synergy SSL inverter pairing, VPP participation and state-rebate qualification for this battery. Rebate and STC amounts are shown in the pricing panel.

CSIP-AUS compliant
Inverter must be CSIP-AUS compliant under the current WA framework.
Synergy SSL approved inverter
Needs pairing with a Synergy SSL approved inverter.
VPP activation ready
VPP activation requires a Synergy SSL approved inverter.
WA Battery Scheme rebate
Requires Battery Rewards participation under the current WA framework.
Synergy Battery Rewards
Requires a CSIP-AUS compliant system and reliable internet.
Interest-free loan
Not eligible for interest-free financing.

Under current WA rules, new rebate applications require VPP enrolment and CSIP-AUS compliance. How the scheme works · Estimate VPP earnings

About AMBRION

View Full Profile →

Years in AU Market4+ years

Local SupportNot verified

CEC-Listed Products60 models

4yr AU

CEC-approved products since 2022

4 years in the Australian market

Fault & error codes — Ambrion HS2

Extracted from the installation manual

34 documented

Showing 34 of 34. The official install manual is the authoritative source — always confirm before acting.

1criticalCall your installer
Manual (PDF)
Master Relay Error
Likely cause
Faulty relay connection or malfunction.
What to do
Reset the inverter. If the error persists, contact the installer.
10criticalCall your installer
Manual (PDF)
Master Phase1 Voltage Low
Likely cause
Voltage below acceptable limit on phase 1.
What to do
Check the grid and surroundings and contact an electrician if needed.
11criticalCall your installer
Manual (PDF)
Master Phase2 Voltage High
Likely cause
Voltage exceeds acceptable limit on phase 2.
What to do
Check the grid voltage level and contact your installer if issues persist.
12criticalCall your installer
Manual (PDF)
Master Phase2 Voltage Low
Likely cause
Voltage below acceptable limit on phase 2.
What to do
Check the grid and surroundings and contact an electrician if needed.
13criticalCall your installer
Manual (PDF)
Master Phase3 Voltage High
Likely cause
Voltage exceeds acceptable limit on phase 3.
What to do
Check the grid voltage level and contact your installer if issues persist.
14criticalCall your installer
Manual (PDF)
Master Phase3 Voltage Low
Likely cause
Voltage below acceptable limit on phase 3.
What to do
Check the grid and surroundings and contact an electrician if needed.
15criticalCall your installer
Manual (PDF)
Grid Voltage 10Min High
Likely cause
High grid voltage duration exceeds 10 minutes.
What to do
Monitor voltage and contact your installer if it continues.
17criticalCall your installer
Manual (PDF)
OffGrid Output Short Circuit
Likely cause
Short circuit detected during off-grid operation.
What to do
Disconnect load and check for short circuits.
2criticalCall your installer
Manual (PDF)
Master EEPROM Error
Likely cause
EEPROM failure or corruption.
What to do
Power cycle the inverter. If the error does not clear, call for professional assistance.
21criticalCall your installer
Manual (PDF)
Phase1 DCV High
Likely cause
Direct current voltage on phase 1 exceeds limits.
What to do
Check voltages and reduce loads if necessary.
22criticalCall your installer
Manual (PDF)
Phase2 DCV High
Likely cause
Direct current voltage on phase 2 exceeds limits.
What to do
Check voltages and reduce loads if necessary.
23criticalCall your installer
Manual (PDF)
Phase3 DCV High
Likely cause
Direct current voltage on phase 3 exceeds limits.
What to do
Check voltages and reduce loads if necessary.
24criticalCall your installer
Manual (PDF)
Master No Grid Error
Likely cause
Grid connection lost or unstable.
What to do
Check grid connection and restart the system.
25criticalCall your installer
Manual (PDF)
DC ReverseConnect Error
Likely cause
Reverse connection of DC input detected.
What to do
Disconnect and check polarity before reconnecting.
27criticalCall your installer
Manual (PDF)
GFCI Error
Likely cause
Ground Fault Circuit Interrupter has detected a fault.
What to do
Reset GFCI and check wiring.
3critical
Manual (PDF)
Master Temperature High Error
Likely cause
Overheating of the master unit.
What to do
Turn off the unit and allow it to cool. Check ventilation before restarting.
31criticalCall your installer
Manual (PDF)
ISO Error
Likely cause
Insulation fault detected in the system.
What to do
Disconnect and inspect for insulation failures.
8criticalCall your installer
Manual (PDF)
Current Sensor Error
Likely cause
Sensor malfunction or disconnection.
What to do
Inspect sensor connections and replace if faulty.
9criticalCall your installer
Manual (PDF)
Master Phase1 Voltage High
Likely cause
Voltage exceeds acceptable limit on phase 1.
What to do
Check the grid voltage level and contact your installer if issues persist.
16warning
Manual (PDF)
OffGrid Output Voltage Low
Likely cause
Output voltage is below threshold when operating off-grid.
What to do
Check load and restart the system.
18warning
Manual (PDF)
Master Grid Frequency High
Likely cause
Grid frequency exceeds safe operational limits.
What to do
Reduce load and wait for frequency to return to normal.
19warning
Manual (PDF)
Master Grid Frequency Low
Likely cause
Grid frequency falls below safe operational limits.
What to do
Increase load and wait for frequency to return to normal.
20warningCall your installer
Manual (PDF)
BATInputMode Error
Likely cause
Input mode error in battery configuration.
What to do
Check battery connections and input modes.
26warningCall your installer
Manual (PDF)
Parallel machine CAN Com Error
Likely cause
Communication failure in parallel machine setup.
What to do
Check CAN connection and restart units.
28warningCall your installer
Manual (PDF)
Phase1 DCI Error
Likely cause
Current input issue on phase 1.
What to do
Inspect current sensor for faults.
29warningCall your installer
Manual (PDF)
Phase2 DCI Error
Likely cause
Current input issue on phase 2.
What to do
Inspect current sensor for faults.
30warningCall your installer
Manual (PDF)
Phase3 DCI Error
Likely cause
Current input issue on phase 3.
What to do
Inspect current sensor for faults.
32warning
Manual (PDF)
Bus Voltage Balance Error
Likely cause
Imbalance detected in bus voltage levels.
What to do
Power cycle the system and monitor voltage balance.
33warning
Manual (PDF)
Master Bus Voltage High
Likely cause
Bus voltage exceeds allowable limit.
What to do
Reduce load and check voltage outputs.
34warning
Manual (PDF)
Master Bus Voltage Low
Likely cause
Bus voltage below safe levels.
What to do
Check connections and increase load if necessary.
4warning
Manual (PDF)
Master Temperature Low Error
Likely cause
Temperature below operating range.
What to do
Warm up the unit to normal operating temperature before restarting.
5warningCall your installer
Manual (PDF)
Lost Communication M<->S
Likely cause
Communication failure between master and slave units.
What to do
Check connections and reboot the inverter.
6warningCall your installer
Manual (PDF)
GFCI Device Error
Likely cause
Ground Fault Circuit Interrupter malfunction.
What to do
Reset the GFCI. If the issue continues, consult an electrician.
7warning
Manual (PDF)
DCI Device Error
Likely cause
Error in the direct current input.
What to do
Inspect DC circuit for faults and restart the system.

What it costs in Perth

$12,825

Typical installed price, before rebates

WA Battery Scheme: Depends on your inverter
Federal STCs: −$3,830
You’d pay about: $8,995

Explore your options

Which size band is your home?

Usable capacity, for one battery system

Smaller home: 10–15 kWh
Medium home: 20–30 kWh
Big home: 30–40 kWh
Very big home: 40+ kWh

This battery is one unit in the smaller home band. The WA rebate caps at 10 kWh, but that is a rebate limit, not a sizing guide.

Does waiting change the rebate?

Estimated federal rebate (STCs) for this 14.25 kWh battery

How it compares

The Ambrion HS2-6K-S2-3 4G against the closest-sized batteries from other brands.

Specification	Ambrion HS2-6K-S2-3 4GAmbrion	Jeeseng JEEDD-153100Jeeseng	Red Earth Energy Storage SRS-318Red Earth Energy Storage

Usable capacity?	14.25 kWh	14.28 kWhbest value	14.2 kWh
Continuous power?	Not verified	Not verified	Not verified
Peak power?	Not verified	Not verified	Not verified

Round-trip efficiency?	98%best value	92%	92%
Warranty	10 years	Not verified	Not verified
Chemistry	LFP	LFP	LFP

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.