Perth · Northern Suburbs · 6036

Solar & battery installers in Butler

How solar and a battery fit a Butler home. See typical sizing for 20-28 kWh of daily use and the WA rebates, then get matched with a member installer who covers Butler.

Independent: we compare installers, we don't sell systems.

Get a battery quoted in Butler

Enter your postcode and get a free, no-obligation quote from a member installer who covers your area.

Solar systems
4,137
Installed
23.6MW
Avg system
5.7kW
Battery systems
425
Sun hours
5.0hrs/day
Yield
1,551kWh/kW

Clean Energy Regulator, postcode 6036, data to September 2026. The battery series starts July 2025. Method and licence with the adoption detail below. Sun hours and yield are Perth-wide averages, not a reading for this suburb or a forecast for any one roof.

Explore your home’s energy day in ButlerWhat-if simulator · 6036

Drag the timeline and the sliders to see how a system would behave on a typical Butler day. Weather and grid status update live when the APIs are reachable.

12:00 PM ☀️Drag to see the day unfold

Household Type

Now
--Loading…
Irradiance
--W/m²
Generating now
0kW
Avg daily yield
34.0kWh

Your estimated savings, on these inputsLive calc

Annual savings
$2,631
Monthly average
$219
Solar used at home
6,972 kWh/yr
Exported to grid
5,210 kWh/yr

Based on 8 kW solar × 5 sun hours × Perth derate, with a 15 kWh battery offsetting Synergy A1 usage and exporting the surplus at DEBS peak/off-peak rates. Real savings depend on your specific tariff plan, usage pattern and installation, and an installer confirms them in the final quote.

Monthly savings, 8 kW system at 70% self-consumption, 33c/kWh~$219
Sun hours, annual average for Butler5 hrs/day
DEBS peak window, export at 10c/kWh in peak and 2c/kWh off-peak3pm–9pm

Grid: no planned outages for Butler (6036).

What matters for a battery in Butler

  1. New development area with modern builds
  2. Larger homes are common, which lifts consumption
  3. Open layouts give roofs clear solar access
  4. Distance from the city makes self-sufficiency appealing
  5. Use more of your solar: A typical 8-13 kW system here often makes more power at midday than the home is using. Exported solar earns less than power bought in the evening, so a battery keeps that surplus for after dark.
  6. Backup during outages: With about 20-28 kWh of daily use, a battery set up for backup can keep the fridge, lights and internet going on a few chosen circuits. Not every battery does this, so ask for backup in the quote.

Solar adoption in ButlerPostcode 6036 · CER data

Small-scale batteries registered since July 2025425
Usable storage those batteries hold8,771 kWh
solar systems installed per 100 dwellings since 2001 (includes upgrades and replacements; dwellings as at 2021 Census)68.6
Occupied private dwellings in postcode 6036 at the 2021 Censusan estimated 6,032
WA total, 3.41 GW installed588,997 systems

The ABS counts dwellings by suburb rather than by postcode, so that total is apportioned across postcode boundaries and is approximate. Every certificate created for a new, upgraded or replaced system since 2001 counts towards the ratio above, so it is not the share of homes with solar. Where building has continued since the Census, the figure can pass 100.

Based on Clean Energy Regulator data for postcode 6036.

Data to September 2026. Licensed from the Clean Energy Regulator, Commonwealth of Australia under a Creative Commons Attribution 4.0 licence. Systems per 100 dwellings is derived. Based on Clean Energy Regulator material, Commonwealth of Australia, under a Creative Commons Attribution 4.0 licence. Based on Australian Bureau of Statistics data, 2021 Census, used under CC BY 4.0.

Grid reliabilityNorthern metropolitan fringe (Northern metropolitan figures)

Backup batteryOptional
Average outage duration80 min
Outages per year0.9
ERA benchmarkPass
Outage duration (SAIDI min/yr), ERA target ≤10572
Outage frequency (SAIFI), ERA target ≤1.20.9

Northern metro suburbs have good grid reliability with below-average outage frequency. Backup battery value is primarily for self-consumption optimisation and DEBS arbitrage rather than outage protection.

Common outage causes: equipment failure, planned maintenance, storm damage. Network infrastructure: Modern underground cabling in newer developments. Some older overhead lines in established areas.

Get matched with a member installer who covers Butler

Tell us your roof and usage and we'll match you with a member installer who covers Butler. You choose whether to act on it. No obligation.

We collect these details to prepare your quote match and to share with the installer(s) we match you with. Not providing them means we can't match you. Full collection notice.

By requesting quotes you agree to be contacted by installers in our network about your enquiry. Part of WattMate Pty Ltd. No spam, opt out any time.