Want to take the next step?
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
This is an illustrative scenario based on typical Perth household data, not a specific customer story.
A common question from Perth homes with existing solar is: "Can I just add a battery without replacing everything?" In WA the better question is which of two paths suits the system you have.
Path 1: replace the inverter with a hybrid. A hybrid inverter runs the panels and the battery together. It charges the battery on the DC side while exporting AC to the house and the grid, so there is one conversion fewer and one device managing both. This is the modern default for a new install or an inverter replacement. With a battery connected, current rules allow a larger array on the same inverter than a solar-only system, up to the inverter maker's limit for that model. DEBS eligibility follows inverter capacity, so a 5 kW hybrid keeps the home inside DEBS even with more panels behind it.
Path 2: keep the existing inverter and add an AC-coupled battery. An AC-coupled battery has its own inverter and sits on the AC side of your switchboard, storing solar after the existing inverter has converted it. Under WA's connection rules in force since 1 May 2026, adding a battery to an existing system is treated as an alteration, and in practice that brings whole-of-site compliance into play. To keep scheme benefits, the setup needs a gateway device on Synergy's Supported Solutions List (SSL) or same-brand shared compliance between the old and new inverters. Without either, export is fixed at 1.5 kW and the state rebate, VPP and state loan are unavailable. In practice, third-party gateway devices have had trouble meeting the requirements and completing testing.
When replacing makes sense: the inverter is several years old or near the end of its warranty, you want more panels as well as a battery, or the AC-coupled path would need a third-party gateway. Replacing toward a hybrid is often the sounder path, because any later addition to an AC-coupled system raises the same compliance question again.
When keeping makes sense: the inverter is recent, compliant and working well, you have no other changes planned, and a gateway or shared-compliance option exists for your exact inverter. In that case an AC-coupled battery can be a reasonable choice. In WA, adding a battery to an existing solar system counts as an alteration and can trigger whole-of-site compliance, so compare an AC-coupled retrofit against replacing your inverter with a hybrid. For many existing systems the sound path is replacing toward a DC-coupled / hybrid-inverter setup rather than expanding an AC-coupled one, avoiding future compliance limitations.
Efficiency trade-off: AC-coupling adds conversion steps (DC to AC, back to DC into the battery, then AC again), and each one loses a little energy compared with a hybrid. For most households the compliance question matters more than that loss.
Capturing wasted exports: If you're currently exporting 8-12 kWh/day at 2c/kWh (DEBS off-peak rate), that's only $0.16-$0.24/day in export credits. Storing that energy and using it in the evening, instead of buying grid power at the 33.26c/kWh A1 rate, avoids $2.66-$3.99/day of purchases instead. Either path captures this value; the difference is cost, compliance and how much room the system leaves to grow.
Size a battery to your evening and overnight use, step by step, with summer cooling in mind.
AS/NZS 5139 clearance rules, garage vs outdoor walls, and what installers check on-site.
Synergy customers get $130/kWh back, capped at $1,300.
Answer a few questions and see systems and installers that fit your home.